LM3914N-1 ,Dot/Bar Display DriverLM3914 Dot/Bar Display DriverFebruary 2003LM3914Dot/Bar Display DriverMuch of the display flexibili ..
LM3914N-1/NOPB ,Dot/Bar Display Driver 18-PDIP 0 to 70ELECTRICAL CHARACTERISTICS(1)Parameter Conditions Min Typ Max UnitsCOMPARATOROffset Voltage, Buffer ..
LM3914V ,Dot/Bar Display DriverGeneral Descriptionoutputsareindividual,DCregulatedcurrents.VariouseffectsThe LM3914 is a monolithi ..
LM3914VX ,Dot/Bar Display DriverFeaturesprecision divider. Indication non-linearity can thus be held1typically to ⁄2%, even over a ..
LM3915 ,Dot/Bar Display Driver
LM3915N ,Dot/Bar Display DriverFeaturessupply as low as 3V or as high as 25V.n 3 dB/step, 30 dB rangeThe IC contains an adjustable ..
LMX2310USLDX ,2.5 GHz PLLatinum Ultra Low Power Frequency Synthesizer for RF Personal CommunicationsFeaturesn RF operation up to 2.5 GHzThe LMX2310/1/2/3U are high performance frequency syn-thesizers ..
LMX2310USLDX ,2.5 GHz PLLatinum Ultra Low Power Frequency Synthesizer for RF Personal CommunicationsLMX2310U/LMX2311U/LMX2312U/LMX2313U PLLatinum Ultra Low Power Frequency Synthesizerfor RF Personal ..
LMX2312USLDX ,1.2 GHz PLLatinum Ultra Low Power Frequency Synthesizer for RF Personal CommunicationsBlock Diagram20043822PLLatinum™ is a trademark of National Semiconductor Corporation. 2003 National ..
LMX2315TM ,Frequency Synthesizer for RF Personal CommunicationsLMX2314/LMX2315PLLatinum1.2GHzFrequencySynthesizerforRFPersonalCommunicationsMarch1995TMLMX2314/LMX ..
LMX2315TMX ,Frequency Synthesizer for RF Personal CommunicationsLMX2314/LMX2315PLLatinum1.2GHzFrequencySynthesizerforRFPersonalCommunicationsMarch1995TMLMX2314/LMX ..
LMX2316TM ,1.2 GHz PLLatinum Low Power Frequency Synthesizer for RF Personal CommunicationsApplicationscan range from 2.3V to 5.5V. The LMX2306/16/26 featureultra low current consumption; LM ..
LM3914N-1-LM3914V-LM3914VX
Dot/Bar Display Driver
LM3914
Dot/Bar Display Driver
General DescriptionThe LM3914isa monolithic integrated circuit that senses
analog voltage levels and drives10 LEDs, providinga linear
analog display.A single pin changes the display froma
moving dottoa bar graph. Current driveto the LEDsis
regulated and programmable, eliminating the needfor resis-
tors. This featureis one that allows operationof the whole
system from less than3V.
The circuit containsits own adjustable reference and accu-
rate 10-step voltage divider. The low-bias-current input
buffer accepts signals downto ground,orV−,yet needsno
protection against inputsof 35V aboveor below ground. The
buffer drives10 individual comparators referencedto the
precision divider. Indication non-linearity can thusbe held
typicallyto 1⁄2%, even overa wide temperature range.
Versatility was designed into the LM3914so that controller,
visual alarm, and expanded scale functions are easily addedtothe display system. The circuit can drive LEDsof many
colors,or low-current incandescent lamps. Many LM3914s
canbe “chained”to form displaysof20to over 100 seg-
ments. Both endsof the voltage divider are externally avail-
ableso that2 drivers canbe made intoa zero-center meter.
The LM3914is very easyto applyasan analog meter circuit. 1.2V full-scale meter requires only1 resistor anda singleto 15V supplyin additiontothe10 display LEDs.If the1
resistorisa pot,it becomesthe LED brightness control. The
simplified block diagram illustrates this extremely simple
external circuitry.
Wheninthedot mode, thereisa small amountof overlapor
“fade” (about1 mV) between segments. This assures thatat time willall LEDsbe “OFF”, and thus any ambiguous
displayis avoided. Various novel displays are possible.
Muchof the display flexibility derives from the fact thatall
outputs are individual,DC regulated currents. Various effects
canbe achievedby modulating these currents. The indi-
vidual outputs can drivea transistoras wellasa LEDatthe
same time,so controller functions including “staging” control
canbe performed. The LM3914 can alsoactasa program-
mer,or sequencer.
The LM3914is ratedfor operation from 0˚Cto +70˚C. The
LM3914N-1is availableinan 18-lead molded(N) package.
The following typical application illustrates adjustingof the
referencetoa desired value, and proper groundingfor ac-
curate operation, and avoiding oscillations.
Features Drives LEDs, LCDsor vacuum fluorescents Baror dot display mode externally selectableby user Expandableto displaysof 100 steps Internal voltage reference from 1.2Vto 12V Operates with single supplyof less than3V Inputs operate downto ground Output current programmable from2 mAto30 mA No multiplex switchingor interaction between outputs Input withstands ±35V without damageor false outputs LED driver outputsare current regulated,
open-collectors Outputs can interface with TTLor CMOS logic The internal 10-step divideris floating and canbe
referencedtoa wide rangeof voltages
February 2003
LM3914
Dot/Bar
Display
Driver