L6000 ,SINGLE CHIP READ & WRITE CHANNELL6000SINGLE CHIP READ & WRITE CHANNELADVANCE DATASUPPORTS 9-32Mbit/s DATA RATE OPERA-TION IN RLL [1 ..
L6004D3 , Sensitive Triacs (0.8 A to 8 A)
L6004D5 , Sensitive Triacs (0.8 A to 8 A)
L6004D6 , Sensitive Triacs (0.8 A to 8 A)
L6004D8 , Sensitive Triacs (0.8 A to 8 A)
L6004F31 , Sensitive Triacs (0.8 A to 8 A)
LC-155A2H1 , 155Mbps 2x5 SFF LC Duplex Optical Transceiver Module for Fast Ethernet, ATM, SONET/SDH STM-1/OC-3
LC241R , THE GLOBAL EXPERT IN SOLID STATE RELAY TECHNOLOGY
LC321664AJ ,1 MEG (65536 words X 16 bits) DRAM Fast Page Mode, Byte WriteFeatures• 65536-word · 16-bit configurationSANYO:SOJ40• Single 5 V ±10% power supply• All input and ..
LC321664AJ-80 ,1MEG (65536words x 16bit) DRAM fast page mode, byte writeAbsolute Maximum RatingsParameter Symbol Ratings Unit NoteMaximum supply voltage V max –1.0 to +7.0 ..
LC321664AM-80 ,1MEG (65536words x 16bit) DRAM fast page mode, byte writeFeatures• 65536-word · 16-bit configurationSANYO:SOJ40• Single 5 V ±10% power supply• All input and ..
LC321664BJ ,1 MEG (65536 words X 16 bits) DRAM Fast Page Mode, Byte WriteFeatures. 65536 words M 16 bits configuration,. Single 5 V , 10% power supply.. All input and outpu ..
L6000
SINGLE CHIP READ & WRITE CHANNEL
L6000SINGLE CHIP READ & WRITE CHANNEL
ADVANCE DATASUPPORTS 9-32Mbit/s DATA RATE OPERA-
TION IN RLL [1,7] CONSTRAINT
- Data Rate is Programmable
SUPPORTS ZONED BIT RECORDING AP-
PLICATIONS
LOW POWER OPERATION (500mW TYPI-
CAL @ 5V @ 32Mbits/Sec
PROVIDES PROGRAMMABILITY THROUGH
SERIAL MICROPROCESSOR INTERFACE
AND INTERNAL REGISTERS
- Bi-directional access to internal registers of
pulse detector, filter, servo demodulator,
frequency synthesizer and data separator.
PROGRAMMABLE POWER DOWN MODES
Full power-down mode (5mW max.)
POWER SUPPLY RANGE 4.3 to 5.5V
DESCRIPTIONThe L6000 is a 5V single chip read channel IC. It
contains all the functions needed to implement a
high performance read channel including the
pulse detector, programmable active filter, servo
demodulator, frequency sinthesizer, and data
separator, at data rates up to 32 Mbit/s. A single
external resistor sets the reference current for the
internal DAC which, in turn, fixes the data rate.
This device is programmed through a serial port
and banks of internal registers. It is fully compat-
ible with zoned bit recording applications. Exter-
nal components do not need to be changed when
switching between zones. The L6000 is manufac-
tured using an advanced BiCMOS technology.
PIN CONNECTION (Top view)
Figure 1a: Block Diagram (1 of 2)
L6000
Figure 1b: Block Diagram (2 of 2)
ABSOLUTE MAXIMUM RATINGS
L6000
PIN DESCRIPTION
L6000
PIN DESCRIPTION (continued)
L6000
