IL300-E ,Linear optocoupler, isolation 5.3KVApplicationsPart RemarksPower Supply Feedback Voltage/CurrentIL300 K3 = 0.557 - 1.618, DIP-8Medical ..
IL300-EX006 ,Optocouplers Document Number 836224 Rev. 1.4, 26-Oct-04IL300VISHAYVishay SemiconductorsCouplerParameter Test co ..
IL300-F ,OptocouplersAPPLICATIONS4 5 .008 (0.203).110 (2.794).012 (0.305)• Power Supply Feedback Voltage/Current .130 (3 ..
IL31 ,PHOTODARLINGTON OPTOCOUPLERElectrical CharacteristicsT = 25 °C, unless otherwise specifiedambMinimum and maximum values are te ..
IL324N , Low Power Quad Operational Amplifier
IL34118 , Voice Switched Speakerphone Circuit
IRF3808PBF ,75V Single N-Channel HEXFET Power MOSFET in a TO-220AB packagePD - 94291BIRF3808AUTOMOTIVE MOSFET®HEXFET Power MOSFETTypical
IRF3808S ,75V Single N-Channel HEXFET Power MOSFET in a D2-Pak packageapplications.Absolute Maximum RatingsParameter Max. UnitsI @ T = 25°C Continuous Drain Current, V @ ..
IRF3808STRLPBF ,75V Single N-Channel HEXFET Power MOSFET in a D2-Pak packageapplications.Standard PackBase Part NumberPackage Type Orderable Part NumberForm QuantityIRF3808LP ..
IRF4000 ,100V Quad N-Channel HEXFET Power MOSFET in a Power MLP packageFeatures Exceeds IEEE 802.3af PoE
IL300-DEFG-X007-IL300-E-IL300-EX006
Optocouplers
IL300Document Number 83622
www.vishay.com
Linear Optocoupler, High Gain Stability, Wide Bandwidth
Features Couples AC and DC signals 0.01 % Servo Linearity Wide Bandwidth, > 200 kHz High Gain Stability, ± 0.05 %/°C Low Input-Output Capacitance Low Power Consumption, < 15 mW Isolation Test Voltage, 5300 V RMS , 1.0 sec. Internal Insulation Distance, > 0.4 mm for VDE Lead-free component Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
Agency Approvals UL File #E52744 DIN EN 60747-5-2 (VDE0884)
DIN EN 60747-5-5 pending
Available with Option 1, Add -X001 Suffix
ApplicationsPower Supply Feedback Voltage/Current
Medical Sensor Isolation
Audio Signal Interfacing
Isolated Process Control Transducers
Digital Telephone Isolation
DescriptionThe IL300 Linear Optocoupler consists of an AlGaAs
IRLED irradiating an isolated feedback and an output
PIN photodiode in a bifurcated arrangement. The
feedback photodiode captures a percentage of the
LED’s flux and generates a control signal (IP1) that
can be used to servo the LED drive current. This tech-
nique compensates for the LED’s non-linear, time,
and temperature characteristics. The output PIN pho-
todiode produces an output signal (IP2) that is linearly
related to the servo optical flux created by the LED.
The time and temperature stability of the input-output
coupler gain (K3) is insured by using matched PIN
photodiodes that accurately track the output
the LED.
