HDP01-0512NRL ,HARD DISK DRIVE POWER SUPPLY PROTECTIONAbsolute Maximum RatingsGreen Categorized for[1]Supply Voltage, V to Ground . -0.5 V to 7.0 VColor ..
HDS-1250ATM ,12-Bit Video Speed Hybrid Current Out D/A Converterspecifications that apply to all devices include
TTL logic; glass or hermetic metal package; umpul ..
HDSM-541C , The HDSM-541x/543x is a dual digit display of 0.56” (14.22mm) height. This device utilizes AlInGaP / GaAs chips and has a grey top surface with white segments.
HDSP-0760 ,HDSP-0760 · Hexadecimal and Numeric DIsplays for Industrial ApplicationsApplicationsHDSP-076x SeriesTechnical DataHDSP-077x SeriesHDSP-086x SeriesHDSP-096x Series
HDSP0762 ,HDSP-0762 · Hexadecimal and Numeric DIsplays for Industrial ApplicationsBlock Diagram.3Absolute Maximum Ratings Description Symbol Min. Max. UnitStorage Temperature, Am ..
HDSP-0762 ,HDSP-0762 · Hexadecimal and Numeric DIsplays for Industrial ApplicationsFeatures • Memory Latch/Decoder/Driver• Three ColorsTTL CompatibleHigh-Efficiency RedYellow • 4 x 7 ..
HM1/6504/883 ,4096 x 1 CMOS RAMHM-6504/883March 1997 4096 x 1 CMOS RAM
HM1/6508/883 ,1024 x 1 CMOS RAMHM-6508/883March 1997 1024 x 1 CMOS RAM
HM112 ,Sincerity Mocroelectronics - NPN EPITAXIAL PLANAR TRANSISTOR
HM112 ,Sincerity Mocroelectronics - NPN EPITAXIAL PLANAR TRANSISTOR
HM1300 ,Sincerity Mocroelectronics - SILICON PNP EPITAXIAL TYPE
HM13003 , NPN SILICON TRANSISTOR
HDP01-0512NRL
HARD DISK DRIVE POWER SUPPLY PROTECTION
Four Character 5.0 mm
(0.2 inch) Smart x 7 Alphanumeric DisplaysTechnical Data
DescriptionThese are 5.0 mm (0.2 inch) four
character 5 x 7 dot matrix
displays driven by an on-board
CMOS IC. These displays are pin
for pin compatible with the
HPDL-2416. The IC stores and
decodes 7 bit ASCII data and
displays it using a 5 x 7 font.
Multiplexing circuitry, and
drivers are also part of the IC.
The IC has fast setup and hold
times which makes it easy to
interface to a microprocessor.
Features
• Enhanced Drop-in Replace-
ment to HPDL-2416 Smart Alphanumeric
DisplayBuilt-in RAM, ASCII Decoder,
and LED Drive Circuitry
CMOS IC for Low Power
Consumption Software Controlled
Dimming Levels and Blank 128 ASCII Character Set End-Stackable Categorized for Luminous
Intensity; Yellow and
Green Categorized for
Color Low Power and Sunlight
Viewable AlGaAs Versions Wide Operating
Temperature Range-40°C to +85°C
Excellent ESD Protection Wave Solderable Wide Viewing Angle
(50°
typ)
Devices:
Absolute Maximum RatingsSupply Voltage, V DD to Ground
[1] ..................................... -0.5 V to 7.0 V
Input Voltage, Any Pin to Ground.......................... -0.5 V to VDD + 0.5 V
Free Air Operating Temperature Range, TA ................ -40°C to +85°C
Storage Temperature, TS ........................................ -40°C to 100°C
CMOS IC Junction Temperature, TJ (IC) ................................... +150°C
Relative Humidity (non-condensing) at 65°C................................... 85%
Maximum Solder Temperature, 1.59 mm
(0.063 in.) below Seating Plane, t < 5 sec. ............................... 260°C
ESD Protection, R = 1.5 kΩ, C = 100 pF .............VZ = 2 kV (each pin)
Note:1. Maximum Voltage is with no LEDs illuminated.
HDLX-2416 Series
The address and data inputs can
be directly connected to the
microprocessor address and data
buses.
The HDLX-2416 has several
enhancements over the HPDL-
2416. These features include an
expanded character set, internal 8
level dimming control, external
dimming capability, and individ-
ual digit blanking. Finally, the
extended functions can be
disabled which allows the HDLX-
2416 to operate exactly like an
HPDL-2416 by disabling all of the
enhancements except the ex-
panded character set.
The difference between the
sunlight viewable HDLS-2416 and
the low power HDLU-2416 occurs
at power-on or at the default
brightness level. Following power
up, the HDLS-2416 operates at
the 100% brightness level, while
Package Dimensionsthe HDLU-2416 operates at the
27% brightness level. Power on
sets the internal brightness
control (bits 3-5) in the control
register to binary code (000). For
the HDLS-2416 binary code (000)
corresponds to a 100% brightness
level, and for the HDLU-2416
binary code (000) corresponds to
a 27% brightness level. The other
seven brightness levels are
identical for both parts.
Character Set
Recommended Operating Conditions
Electrical Characteristics over Operating Temperature Range4.5 < VDD < 5.5 V (unless otherwise specified)
All Devices
HDLO/HDLA/HDLY/HDLG-2416
Notes:1. V = 5.0 V
HDLS/HDLU-2416
HDLR-2416
Optical Characteristics at 25°C[1]DD = 5.0 V at Full Brightness
HDLR-2416
HDLS/HDLU-2416
HDLO-2416
HDLA-2416
HDLY-2416
HDLG-2416
Notes: Refers to the initial case temperature of the device immediately prior to the light measurement. Dominant wavelength, λd , is derived from the CIE chromaticity diagram, and represents the single wavelength which defines
the color of the device.
AC Timing Characteristics over Operating
Temperature Range at VDD = 4.5 V
Timing Diagram Enlarged Character Font
