FXL5T244 ,Low Voltage Dual Supply 5-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE OutputsFXL5T244 Low Voltage Dual Supply 5-Bit Signal Translator with Configurable Voltage Supplies and Sig ..
FXL5T244BQX ,Low Voltage Dual Supply 5-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE OutputsFeaturesThe FXL5T244 is a configurable dual-voltage-supply trans-
FXL5T244-FXL5T244BQX
Low Voltage Dual Supply 5-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs
FXL5T244 Low Voltage Dual Supply 5-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs June 2004 Revised June 2004 FXL5T244 Low Voltage Dual Supply 5-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs General Description Features The FXL5T244 is a configurable dual-voltage-supply trans-One-way (unidirectional) translation between any lator designed for one-way (unidirectional) voltage transla- 2 levels from 1.1V to 3.6V tion of signals between two voltage levels. The deviceFully configurable, inputs and outputs track respective allows translation between voltages as high as 3.6V to as V levels CC low as 1.1V. A Inputs and the OE Control Pin track the V CCI Non-preferential power-up sequencing; either V may CC level, and Y Outputs track the V level. Both inputs and CCO be powered-up first outputs are designed to accept supply voltage levels from Outputs remain in 3-STATE until active V level is CC 1.1V to 3.6V. This allows for unidirectional voltage transla- reached tion over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V.Outputs switch to 3-STATE if either V is at GND CC The device remains in 3-STATE until both V s reach CCPower-off protection active levels allowing either V to be powered-up first. CCControl input (OE) level is referenced to V voltage CCI The device also contains power down control circuits that Packaged in 14-terminal DQFN (2.5mm x 3.0mm) place the device in 3-STATE if either V is removed. The CC package OE input, when HIGH, disables the outputs by placing ESD protection exceeds: them in 3-STATE condition. • 4kV HBM ESD (per JESD22-A114 & Mil Std 883e 3015.7) 8kV HBM I/O to GND ESD (per JESD22-A114 & Mil Std 883e 3015.7) 1kV CDM ESD (per ESD STM 5.3) 200V MM ESD (per JESD22-A115 & ESD STM5.2) Ordering Code: Package Order Number Package Description Number FXL5T244BQX MLP014A 14-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 3.0mm © 2004 DS500892
