ETP01-1621RL ,Protection for Ethernet linesApplicationsdebit rate communication network. Planar This series can meet subscriber and central of ..
ETP01-2821RL ,Protection for Ethernet linesFeatures■ Differential and common mode protection■ Telcordia GR1089 Intrabuilding: 150 A, 2/10 µs■ ..
EVALCOMMBOARD ,Communication/ control board based on ST72F651AR6 microcontroller for power line communication and industrial productsapplications. Ten bits digital to analog converter (DAC) and high gain, high bandwidth amplifiers a ..
EVALCOMMBOARD ,Communication/ control board based on ST72F651AR6 microcontroller for power line communication and industrial productsGeneral descriptionThe EVALCOMMBOARD is a general purpose board developed around the following prin ..
EVALST7538DUAL ,Dual channel power line transceiver board based on ST7538applications the EVALCOMMBOARD GUI software. Controllable by a PC through EVALCOMMBOARD general ..
EVK71-050 ,Power Transistor ModuleFeatures
. 7 y -m.f y >79? 8- mm
qhFetr9$ct High DC Current Gain
otttmf..', Insulated Type
..
FAN5009M ,Synchronous DC-DC MOSFET DriverGeneral Description• Drives N-channel High-Side and Low-Side MOSFETs in The FAN5009 is a dual, high ..
FAN5009M ,Synchronous DC-DC MOSFET Driver FAN5009Dual Bootstrapped 12V MOSFET Driver
FAN5009MPX ,Dual Bootstrapped 12V MOSFET DriverGeneral Description• Drives N-channel High-Side and Low-Side MOSFETs in The FAN5009 is a dual, high ..
FAN5009MX ,Synchronous DC-DC MOSFET DriverGeneral Description• Drives N-channel High-Side and Low-Side MOSFETs in The FAN5009 is a dual, high ..
FAN5019MTC ,2 to 4 Phase 6-bit VID-Controlled Synchronous Buck Controllerfeatures a high bandwidth control loop to ®• Accurate Load-Line Programming (Meets Intel provide op ..
FAN5019MTCX ,2 to 4 Phase 6-bit VID-Controlled Synchronous Buck ControllerGeneral Description• Pin and Function Backward Compatible with FAN53168 The FAN5019 is a multi-pha ..
ETP01-1621RL-ETP01-2821RL
Protection for Ethernet lines
ETP01-xx21Protection for Ethernet lines
Features Differential and common mode protection Telcordia GR1089 Intrabuilding: 150 A, 2/10 µs ITU-T K20/21: 40 A, 5/310 µs Low capacitance: 13 pF max at 0 V UL94 V0 approved resin SO-8 package is JEDEC registered
Benefits Trisil™ technology is not subject to ageing and
provides a fail safe mode in short circuit for a
better protection. This series is used to help equipment to meet
main standards such as UL61950, IEC 950 /
CSA C22.2 and UL1459.
Complies with the following standards IEC 61000-4-2: Level 4 15 kV (air discharge) 8 kV (contact discharge) MIL STD 883E-Method 3015-7: class3: 25 kV (Human body model) Telcordia GR-1089 Core: 100 A, 2/10 µs ITU-T K20/21: 37.5 A, 5/310 µs IEC 61000-4-5: 4 kV, 42 Ω, 96 A, 8/20 µs IEC 61000-4-4 EFT : 40A (5/50ns)
ApplicationsThis series can meet subscriber and central office
requirements. Protection against telecommunications surge
standards on: 10/100 Mbps Ethernet T1 / E1 line cards
Figure 1. Schematic diagram (top view)
DescriptionThe ETP01 series is a low capacitance transient
surge arrestor designed for protection of high
debit rate communication network. Planar
technology used combines a high surge capability
to comply with Telcordia GR1089 Intrabuilding
and ITU-T K20/21, and low capacitance to avoid
distortion of high speed signals such as Ethernet.
TM: T risil is a trademark of STMicroelectronics
Characteristics ETP01-xx21
1 Characteristics
Table 1. Absolute ratings (Tamb = 25 °C) Surge capability tested according to ITU-T K20/21 and Telcordia GR1089 Intrabuilding connections
(Metallic and Longitudinal tests).
Table 2. Electrical characteristics (T amb = 25 °C) Test conditions: Capacitance between I/O and GND, VR = 0 V bias, VRMS = 1 V, F = 1 MHz Test conditions: Capacitance between I/O and I/O, VR = 0 V bias, VRMS = 1 V, F = 1 MHz
ETP01-xx21 Characteristics
Figure 2. Non repetitive surge peak on-state current versus overload duration
Figure 3. Junction capacitance versus
reverse voltage applied for
ETP01-1621 (typical values)
Figure 4. Junction capacitance versus
reverse voltage applied for
ETP01-2821 (typical values)
Application information ETP01-xx21
2 Application information
Figure 5. Application schematic for Ethernet 10/100 Mbps
Figure 6. Recommended layout
ETP01-xx21 Package information
3 Package information Epoxy meets UL94, V0 Lead-free package
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: .
ECOPACK® is an ST trademark.
Table 3. SO-8 dimensions
Figure 7. Footprint dimensions
Figure 8. Marking
Ordering information ETP01-xx21
4 Ordering information
5 Revision history
Table 4. Ordering information
Table 5. Document revision history
