DS9105-003# ,iButton Number SetFEATURES EXAMPLES OF ACCESSORIES DS1982-based iButtons branded with their DS9096P Self-Stick Adhe ..
DS9105-009# ,iButton Number Set19-4879; Rev 8/09 DS9105 iButton Number Set
DS9105-00C# ,iButton Number Set19-4879; Rev 8/09 DS9105 iButton Number Set
DS9105-00E# ,iButton Number SetFEATURES EXAMPLES OF ACCESSORIES DS1982-based iButtons branded with their DS9096P Self-Stick Adhe ..
DS9105-SET# ,iButton Number Set19-4879; Rev 8/09 DS9105 iButton Number Set
DS9106L-GN ,iButton HaloDS9106TMiButton Halowww.dalsemi.com
DS9105-000#-DS9105-001#-DS9105-002#-DS9105-003#-DS9105-009#-DS9105-00C#-DS9105-00E#-DS9105-SET#
iButton Number Set
FEATURES DS1982-based iButtons branded with their
respective character for optimum legibility 128 bytes of user-programmable EPROM in
each iButton for maximum flexibility Available as set of 12 (as shown in the
graphic) or as individual iButtons
ORDERING INFORMATION PART
TYPE
DS9105-SET# COMPLETE SET OF 12
DS9105-000# NUMBER ZERO
DS9105-001# NUMBER ONE
DS9105-002# NUMBER TWO
DS9105-003# NUMBER THREE
DS9105-004# NUMBER FOUR
DS9105-005# NUMBER FIVE
DS9105-006# NUMBER SIX
DS9105-007# NUMBER SEVEN
DS9105-008# NUMBER EIGHT
DS9105-009# NUMBER NINE
DS9105-00C# CLEAR
DS9105-00E# ENTER
#Denotes a RoHS-compliant device that may include lead(Pb) that is
exempt under the RoHS requirements.
EXAMPLES OF ACCESSORIES DS9096P Self-Stick Adhesive Pad
DS9092GT iButton Wand
DS9097U COM-Port Adapter
DS9106 iButton Halos
DS9093RA iButton Lock Ring
DS9093RB iButton Flange Enlargement
DESCRIPTION Unlike conventional keypads, where data is entered by pressing a mechanical key, the solid buttons of an
iButton keypad allow users to enter data by simply touching each button with an iButton probe or
handheld computer. Each of these buttons comes from the factory with blank memory, allowing the user
to program each button with whatever data the user would like entered when touched. The iButton
keypad is a simple, robust alternative for data entry in harsh environments such as outdoors, industrial
workplaces and other locations, where a normal keypad is impractical to operate. Since iButtons are made
from stainless steel, this keypad is easily cleaned with hot water and detergent.
The individual iButtons that comprise the keypad can be arranged as desired to maximize ease of use.
They can be stuck on a smooth surface using adhesive pads or mounted through 16.5mm holes in a rigid
material and fastened by lock rings. The material thickness should not exceed 3.0mm. For a detailed
DS9105
iButton Number Set
19-4879; Rev 8/09
DS9105
2 of 2
REVISION HISTORY
REVISION
DATE DESCRIPTION PAGES
CHANGED8/09 Added RoHS-compliance indicators to the Ordering Information table. 1
This datasheet has been :
www.ic-phoenix.com
Datasheets for electronic components.
