CS8371ET7 ,8V/1A/ 5V/250mA Dual Regulator with Independent Output Enables and NoCapELECTRICAL CHARACTERISTICS: (–40°C ≤ T ≤ +85°C, 10.5 V ≤ V ≤ 16 V, ENABLE = ENABLE = 5.0 V,A CC 1 ..
CS8404A-CS , 96KHZ DIGITAL AUDIO TRANSMITTER
CS8404A-CS , 96KHZ DIGITAL AUDIO TRANSMITTER
CS8405A-CZZ , 96 kHz Digital Audio Interface Transmitter
CS8406-CS , 192 KHZ DIGITAL AUDIO INTERFACE TRANSMITTER
CS8406-CSZ , 192 kHz Digital Audio Interface Transmitter
CXD2107M , HI8 SYSTEM DETECTION IC
CXD2163R , SIGNAL PROCESSOR LSI FOR SINGLE-CHIP CCD COLOR CAMERA
CXD2163R , SIGNAL PROCESSOR LSI FOR SINGLE-CHIP CCD COLOR CAMERA
CXD2301Q , 8-bit 30MSPS Video A/D Converter with Built-in Amplifier/Clamp
CXD2308Q , 10-bit 50MSPS RGB 3-channel D/A Converter
CXD2310AR , 10-bit 20MSPS Video A/D Converter
CS8371-CS8371ET7
8V/1A, 5V/250mA Dual Regulator with Independent Output Enables and NoCap
CS8371
8.0 V/1.0 A, 5.0 V/250 mA
Dual Regulator
with Independent Output
Enables and NOCAP �
The CS8371 is an 8.0 V/5.0 V dual output linear regulator. The 8.0
V ±5.0% output sources 1.0 A, while the 5.0 V ±5.0% output sources
250 mA. Each output is controlled by its own ENABLE lead. Setting
the ENABLE input high turns on the associated regulator output.
Holding both ENABLE inputs low puts the IC into sleep mode where
current consumption is less than 10 μA.
The regulator is protected against overvoltage, short–circuit and
thermal runaway conditions. The device can withstand 45 V load dump
transients making suitable for use in automotive environments. ON’s
proprietary NOCAP solution is the first technology which allows the
output to be stable without the use of an external capacitor.
The CS8371 is available in a 7 lead TO–220 package with copper
tab. The tab can be connected to a heatsink if necessary.
Features• Two Regulated Outputs 8.0 V ±5.0%; 1.0 A 5.0 V ±5.0%; 250 mA Independent ENABLE for Each Output Seperate Sense Feedback Lead for 8.0 V Output < 10 μA Sleep Mode Current Fault Protection Overvoltage Shutdown +45 V Peak Transient V oltage Short Circuit Thermal Shutdown CMOS Compatible, Low Current ENABLE Inputs