CS1108 ,Single Lamp Driver IC2CS1108CIRCUIT DESCRIPTIONThe CS1108 lamp driver IC provides up to 350 mA of Typical lamps have a l ..
CS1108EDFR8 , Single Lamp Driver IC
CS1301 ,Geode CS1301/CS1311 Multimedia Companion:Media CoprocessorFeatures VLD Coprocessor■ Physical ■ Parses MPEG-1 and MPEG-2 elementary bit streamsgenerating run- ..
CS1311 ,Media CoprocessorFeatures VLD Coprocessor■ Physical ■ Parses MPEG-1 and MPEG-2 elementary bit streamsgenerating run- ..
CS18LV02565AC-70 , HIGH SPEED SUPER LOW POWER SRAM
CS18LV02565ACR70 , HIGH SPEED SUPER LOW POWER SRAM
CX-49F , For ECU.
CX-49F , For ECU.
CX5013 , RF/CABLE LOW PASS FILTERS
CX-53F , Ultra-thin, thickness 1.1mm or less.
CX6002 , BROADBAND: RF & WIRELESS
CX6020 , BROADBAND: RF & WIRELESS
CS1108
Single Lamp Driver IC
CS1108
Single Lamp Driver IC
This ASIC provides up to 350 mA of drive current for powering
bulbs. The typical application for this part is for use in airbag systems
using a type 194 bulb. On–chip diagnostics provide open circuit and
short circuit detection in the output on mode. In addition, the output
driver will turn on (sink current) when VCC is low. Fault is an
active–low output which reports in the output–on mode. Internal
pull–up circuitry is provided to ensure the output pin turns on when the
Control pin is floating.
Features• Fault Detection Open Circuit Short Circuit Overtemperature VCC Sense: Output Turns On with Loss of VCC Low Standby Current Internally Fused Leads in SO–8 Package
GND
VCC
Control
Output
Figure 1. Block DiagramGND GND GND
Fault
