ADM823LYRT-R7 ,Supervisory Circuits with Watchdog and Manual Reset in 5-Lead SC70 and SOT-23GENERAL DESCRIPTION Each part is available in a choice of seven reset threshold The ADM823/ADM824/A ..
ADM823MYKS-R7 ,Supervisory Circuits with Watchdog and Manual Reset in 5-Lead SC70 and SOT-23applications. parts feature different combinations of watchdog input, manual reset input and outpu ..
ADM823MYRJZ-R7 , Supervisory Circuits with Watchdog and Manual Reset in 5-Lead SC70 and SOT-23
ADM823RYKS-R7 ,Supervisory Circuits with Watchdog and Manual Reset in 5-Lead SC70 and SOT-23Specifications subject to change without notice. No license is granted by implication www.analog.c ..
ADM823RYRJZ-R7 , Supervisory Circuits with Watchdog and Manual Reset in 5-Lead SC70 and SOT-23
ADM823SYRJ-R7 ,Supervisory Circuit with Watchdog, Manual Reset and Active-Low, Push-Pull Reset OutputGENERAL DESCRIPTION Each part is available in a choice of seven reset threshold The ADM823/ADM824/A ..
AIC1821DCV , ONE-CELL LITHIUM-ION BATTERY PROTECTION IC
AIC1845CGTR , Regulated 5V Charge Pump In SOT-23
AIC1845PG , Regulated 5V Charge Pump In SOT-23
AIC1848CG , Regulated 5V Charge Pump In SOT-23
AIC1896GG , 1. 4MHz Thin Package Current-Mode Step-Up DC/DC Converter
AIC2951 , Low Dropout Linear Regulator
ADM823LYKS-R7-ADM823LYRT-R7-ADM823MYKS-R7-ADM823RYKS-R7-ADM824
Supervisory Circuits with Watchdog and Manual Reset in 5-Lead SC70 and SOT-23
Supervisory Circuits with Watchdog and
Manual Reset in 5-Lead SC70 and SOT-23
Rev.PrB
FEATURES
Precision 2.5 V to 5 V power supply monitor
7 reset threshold options: 2.19 V to 4.63 V
140 ms (min) reset timeout
Watchdog timer with 1.6s timeout (ADM823, ADM824)
Manual reset input (ADM823, ADM825)
Push-pull output stages:
RESET (ADM823)
RESET, RESET (ADM824/ADM825)
Low power consumption (3 µA)
Guaranteed reset output valid to VCC = 1 V
Power supply glitch immunity
Specified over automotive temperature range
5-lead SC70 and SOT-23 packages
APPLICATIONS
Microprocessor systems
Computers
Controllers
Intelligent instruments
Portable equipment
FUNCTIONAL BLOCK DIAGRAM
VCC
GNDWDI
RESET04534-0-001
Figure 1.
GENERAL DESCRIPTION The ADM823/ADM824/ADM825 are supervisory circuits
which monitor power supply voltage levels and code execution
integrity in microprocessor-based systems. As well as providing
power on reset signals, an on-chip watchdog timer can reset the
microprocessor if it fails to strobe within a preset timeout
period. A reset signal can also be asserted by means of an
external push-button, through a manual reset input. The three
parts feature different combinations of watchdog input, manual
reset input and output stage configuration, as shown in Table 1.
Each part is available in a choice of seven reset threshold
options ranging from 2.19 V to 4.63 V. The reset and watchdog
timeout periods are fixed at 140 ms (min) and 1.6s (typ),
respectively.
The ADM823/ADM824/ADM825 are available in 5-lead SC70
and SOT-23 packages and typically consume only 3 µA, making
them suitable for use in low power portable applications.
Table 1. Selection Table TABLE OF CONTENTS Specifications.....................................................................................3
Absolute Maximum Ratings............................................................5
ESD Caution..................................................................................5
Pin Configurations and Function Descriptions...........................6
Typical Performance Characteristics..............................................7
OUTLINE DIMENSIONS...............................................................9
Ordering Guides.........................................................................10
SPECIFICATIONS VCC = 4.75 V to 5.5 V for ADM82_L, VCC = 4.5 V to 5.5 V for ADM82_M, VCC = 3.15 V to 3.6 V for ADM82_T,
VCC = 3 V to 3.6 V for ADM82_S, VCC = 2.7 V to 3.6 V for ADM82_R, VCC = 2.38 V to 2.75 V for ADM82_Z,
VCC = 2.25 V to 2.75 V for ADM82_Y, TA = TMIN to TMAX, unless otherwise noted
Table 2.
ABSOLUTE MAXIMUM RATINGS TA = 25°C, unless otherwise noted.
Table 3. Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only and functional operation of the device at these or
any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the
human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS
ADM823
TOP VIEW
(Not to Scale)
GND
VCC
WDI04534-0-002
Figure 2. ADM823 Pin Configuration
ADM824
TOP VIEW
(Not to Scale)
GND
RESET
VCC
WDI04534-0-003
Figure 3. ADM824 Pin Configuration
ADM825
TOP VIEW
(Not to Scale)
GND
RESET
VCC04534-0-004
Figure 4. ADM825 Pin Configuration
Table 4. Pin Function Descriptions
