IC Phoenix logo

Home ›  7  › 724 > 74LVT16646ADL

74LVT16646ADL from PHI,Philips

Fast Delivery, Competitive Price @IC-phoenix

If you need more electronic components or better pricing, we welcome any inquiry.

74LVT16646ADL

Manufacturer: PHI, PHILIPS

74LVT16646A; 3.3 V 16-bit bus transceiver; 3-state

Partnumber Manufacturer Quantity Availability
74LVT16646ADL PHI, PHILIPS 334 In Stock

Description and Introduction

74LVT16646A; 3.3 V 16-bit bus transceiver; 3-state The 74LVT16646ADL is a 16-bit bus transceiver and register manufactured by Philips (PHI). It features non-inverting 3-state bus compatible outputs in both send and receive directions. The device operates with a supply voltage range of 2.7V to 3.6V, making it suitable for low-voltage applications. It supports bidirectional data flow and has separate control inputs for data flow in each direction. The 74LVT16646ADL is designed for high-speed operation and is compatible with TTL levels. It is available in a 56-pin SSOP (Shrink Small Outline Package) and is typically used in applications requiring high-speed data transfer and buffering.

Application Scenarios & Design Considerations

74LVT16646A; 3.3 V 16-bit bus transceiver; 3-state# 74LVT16646ADL Technical Documentation

*Manufacturer: PHILIPS*

## 1. Application Scenarios

### Typical Use Cases
The 74LVT16646ADL is a 16-bit bus transceiver and register designed for bidirectional asynchronous communication between data buses. Key applications include:

 Data Bus Buffering : Provides isolation and signal conditioning between microprocessor buses and peripheral devices, preventing bus contention and improving signal integrity in systems with multiple drivers.

 Bus Interface Units : Serves as a bidirectional interface between processors and memory subsystems (RAM, ROM, Flash), enabling efficient data transfer while maintaining proper voltage level translation.

 Hot-Swap Applications : The 3.3V LVT technology with bus-hold circuitry makes it suitable for live insertion/removal scenarios in modular systems and backplane architectures.

 Port Expansion Systems : Enables multiple peripheral connections to limited I/O ports through multiplexing/demultiplexing operations in embedded systems.

### Industry Applications
-  Telecommunications Equipment : Used in router backplanes, switch fabrics, and base station controllers for data path management
-  Industrial Automation : PLC systems, motor controllers, and sensor interface modules requiring robust bus communication
-  Networking Hardware : Ethernet switches, routers, and network interface cards for bus isolation and level translation
-  Automotive Electronics : Infotainment systems and body control modules where 3.3V logic interfaces with various peripherals
-  Medical Devices : Patient monitoring equipment and diagnostic systems requiring reliable data acquisition

### Practical Advantages and Limitations

 Advantages: 
-  Low Power Consumption : Typical I_CC of 20μA (static) makes it suitable for power-sensitive applications
-  High-Speed Operation : 3.5ns typical propagation delay supports bus frequencies up to 200MHz
-  Bus-Hold Circuitry : Eliminates need for external pull-up/pull-down resistors, saving board space and component count
-  3.3V Operation : Compatible with modern low-voltage systems while maintaining 5V tolerance on inputs
-  Live Insertion Capability : Power-up/power-down protection prevents bus contention during hot-swap operations

 Limitations: 
-  Limited Drive Strength : 32mA output current may require additional buffering for high-capacitance loads
-  Temperature Range : Commercial temperature range (0°C to +70°C) limits use in extreme environments
-  Package Constraints : 56-pin SSOP package requires careful PCB layout for signal integrity
-  No Built-in ESD Protection : Requires external protection components for harsh electrical environments

## 2. Design Considerations

### Common Design Pitfalls and Solutions

 Signal Integrity Issues 
- *Problem:* Ringing and overshoot on long transmission lines due to improper termination
- *Solution:* Implement series termination resistors (22-33Ω) close to driver outputs for impedance matching

 Simultaneous Switching Noise 
- *Problem:* Ground bounce during multiple output transitions causing false triggering
- *Solution:* Use adequate decoupling capacitors (0.1μF ceramic + 10μF tantalum) near power pins and minimize simultaneous output switching

 Power Sequencing 
- *Problem:* Damage or latch-up when I/O voltages are applied before V_CC
- *Solution:* Implement proper power sequencing control or use devices with built-in power-up protection

### Compatibility Issues with Other Components

 Mixed Voltage Systems 
- The 74LVT16646ADL interfaces seamlessly with other 3.3V LVT/LVC families but requires careful consideration when connecting to:
  -  5V TTL Devices : Inputs are 5V tolerant, but outputs may not meet 5V input thresholds without level shifters
  -  2.5V/1.8V Logic : Requires voltage translation for proper signal levels
  -  Analog Components : May need series resistors

Alternative Part Number

  • SN74LVT16646DL --: Same LVT 16-bit registered transceiver function in the same SSOP-56 package, widely available and a direct functional replacement.
  • 74LVT16646ADGG --: Equivalent LVT 16-bit transceiver from the original series lineage, offered in TSSOP packaging with matching logic characteristics.
  • 74ALVT16646DL --: ALVT family 16-bit transceiver with similar speed and drive, usable as a functional substitute when LVT stock is unavailable.
  • 74LVTH16646MTD --: LVTH 16-bit transceiver with bus-hold, compatible logic function and 3.3V operation, suitable drop-in alternative.

Request Quotation

For immediate assistance, call us at +86 533 2716050 or email [email protected]

Part Number Quantity Target Price($USD) Email Contact Person
We offer highly competitive channel pricing. Get in touch for details.

Specializes in hard-to-find components chips