![](/IMAGES/ls12.gif)
74LVC2GU04GM ,Dual inverterfeatures allow the use of these devices in a mixed– HBM EIA/JESD22-A114-B exceeds 2000 V3.3 V and 5 ..
74LVC2GU04GM ,Dual inverterFEATURES DESCRIPTION• Wide supply voltage range from 1.65 V to 5.5 V The 74LVC2GU04 is a high-perfo ..
74LVC2GU04GW ,Dual inverterFeatures and benefits Wide supply voltage range from 1.65 V to 5.5 V 5 V tolerant input/output fo ..
74LVC32245AEC ,32-bit bus transceiver with direction pin; 5 V tolerant; 3-stateFEATURES DESCRIPTION• 5 V tolerant inputs/outputs for interfacing with 5 V logic The 74LVC(H)32245A ..
74LVC32A ,QUADRUPLE 2-INPUT OR GATES
74LVC32A ,QUADRUPLE 2-INPUT OR GATES
82103C , Miniature Surface Mount Power Inductors
82107 ,IR Receiver Modules for Remote Control SystemsRev. 5, 15-Oct-2002 3T ,T – Output Pulse Width ( ms )E / E – Rel. Responsivity ..
82107 ,IR Receiver Modules for Remote Control SystemsRev. 5, 15-Oct-2002 1CircuitTSOP22..YA1VISHAYVishay SemiconductorsParameter Test condition Symbol V ..
82356120100 , 0603 ESD Suppressor
82401646 , TVS Diode Array WE-TVS
824-1 , LAN 10/100 BASE-T Single Port Transformer Modules
74LVC2GU04GM
Dual inverter
Philips Semiconductors Product specification
Dual inverter 74LVC2GU04
FEATURES Wide supply voltage range from 1.65Vto 5.5V5 V tolerant input/output for interfacing with 5 V logic High noise immunity ESD protection: HBM EIA/JESD22-A114-B exceeds 2000V MM EIA/JESD22-A115-A exceeds 200V.
•±24 mA output drive (VCC= 3.0V) CMOS low power consumption Latch-up performance exceeds 250 mA Multiple package options Specified from −40°Cto +85°C and −40°Cto +125 °C.
DESCRIPTIONThe 74LVC2GU04 is a high-performance, low-power,
low-voltage, Si-gate CMOS device, superior to most
advanced CMOS compatible TTL families.
Input can be driven from either 3.3Vor5 V devices.
These features allow the use of these devices in a mixed
3.3V and5 V environment.
The 74LVC2GU04 provides two inverters. Each inverteris
a single stage with unbuffered output.
QUICK REFERENCE DATAGND=0 V; Tamb =25 °C.
Notes CPD is used to determine the dynamic power dissipation (PDin μW). =CPD× VCC2×fi× N+ ∑(CL× VCC2×fo) where:= input frequency in MHz;= output frequency in MHz;= output load capacitance in pF;
VCC= supply voltage in Volts;= total load switching outputs;
∑(CL× VCC2×fo)= sum of outputs. The condition is VI= GNDto VCC.
Philips Semiconductors Product specification
Dual inverter 74LVC2GU04
FUNCTION TABLESee note1.
Note H= HIGH voltage level;= LOW voltage level.
ORDERING INFORMATION
PINNING
Philips Semiconductors Product specification
Dual inverter 74LVC2GU04
Philips Semiconductors Product specification
Dual inverter 74LVC2GU04
RECOMMENDED OPERATING CONDITIONS
LIMITING VALUES accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referencedto GND (ground=0 V).
Note The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
Philips Semiconductors Product specification
Dual inverter 74LVC2GU04
CHARACTERISTICSAt recommended operating conditions; voltages are referenced to GND (ground=0 V).
Philips Semiconductors Product specification
Dual inverter 74LVC2GU04
Note All typical values are measured at Tamb =25 °C.
Philips Semiconductors Product specification
Dual inverter 74LVC2GU04
CHARACTERISTICSGND=0V.
Note All typical values are measured at nominal VCC and Tamb =25 °C.
WAVEFORMS