74LVC1G386GW ,74LVC1G386; 3-input EXCLUSIVE-OR gateINTEGRATED CIRCUITSDATA SHEET74LVC1G3863-input EXCLUSIVE-OR gateProduct specification 2003 Nov 04Phi ..
74LVC1G38GM ,2-input NAND gate; open drainLogic diagram74LVC1G38 All information provided in this document is subject to legal disclaimers. ..
74LVC1G38GV ,2-input NAND gate; open drainFeatures■ Wide supply voltage range from 1.65 V to 5.5 V■ 5 V tolerant outputs for interfacing with ..
74LVC1G38GW ,74LVC1G38; 2-input NAND gate (open drain)Features and benefits Wide supply voltage range from 1.65 V to 5.5 V 5 V tolerant outputs for int ..
74LVC1G53DC ,2-channel analog multiplexer/demultiplexerGeneral descriptionThe 74LVC1G53 is a low-power, low-voltage, high-speed, Si-gate CMOS device.The 7 ..
74LVC1G53DP ,2-channel analog multiplexer/demultiplexerFeatures and benefits Wide supply voltage range from 1.65 V to 5.5 V Very low ON resistance: 7.5 ..
81487EIB ,【15kV ESD Protected, 1/8 Unit Load, 5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers
8155H-2 , 2048-BIT STATIC HMOS RAM WITH I/O PORTS AND TIMER
8169 ,DIGITAL AUDIO PROCESSOR WITH MULTICHANNEL DDX⑩applications with commercial audio D/A converters. The output sampling frequency is fixed at 48 kHz ..
8-188275-4 , AMP Micro-Match Miniature Connector System
81C55 ,2048-Bit CMOS STATIC RAM WITH I/O PORTS AND TIMER
81C55 ,2048-Bit CMOS STATIC RAM WITH I/O PORTS AND TIMER
74LVC1G386GV-74LVC1G386GW
74LVC1G386; 3-input EXCLUSIVE-OR gate
Philips Semiconductors Product specification
3-input EXCLUSIVE-OR gate 74L VC1G386
FEATURES Wide supply voltage range from 1.65to 5.5V High noise immunity Complies with JEDEC standard: JESD8-7 (1.65to 1.95V) JESD8-5 (2.3to 2.7V) JESD8B/JESD36 (2.7to 3.6V).
•±24 mA output drive (VCC= 3.0V) CMOS low power consumption Latch-up performance exceeds 250 mA Direct interface with TTL levels Inputs accept voltages up to 5V ESD protection: HBM EIA/JESD22-A114-A exceeds 2000V MM EIA/JESD22-A115-A exceeds 200V. Specified from −40to +125°C SOT363 and SOT457.
DESCRIPTIONThe 74LVC1G386 is a high-performance, low-power,
low-voltage, Si-gate CMOS device, superior to most
advanced CMOS compatible TTL families.
The input can be driven from either 3.3or5 V devices.
This feature allows the use of these devices in a mixed
3.3 and5 V environment.
Schmitt-trigger action at all inputs makes the circuit
tolerant for slower input rise and fall time.
This device is fully specified for partial power-down
applications using Ioff. TheIoff circuitry disables the output,
preventing the damaging backflow current through the
device when it is powered down.
The 74LVC1G386 provides the 3-input EXCLUSIVE-OR
function.
QUICK REFERENCE DATAGND=0 V; Tamb =25 °C; tr =tf≤ 2.5 ns.
Notes CPD is used to determine the dynamic power dissipation (PDin μW). =CPD× VCC2×fi× N+ Σ(CL× VCC2×fo) where: = input frequency in MHz;= output frequency in MHz;= output load capacitance in pF;
VCC= supply voltage in Volts;= total load switching outputs;
Σ(CL× VCC2×fo)= sum of the outputs. The condition is VI= GNDto VCC.
Philips Semiconductors Product specification
3-input EXCLUSIVE-OR gate 74L VC1G386
FUNCTION TABLESee note1.
Note H= HIGH voltage level;= LOW voltage level.
ORDERING INFORMATION
PINNING
Philips Semiconductors Product specification
3-input EXCLUSIVE-OR gate 74L VC1G386
Philips Semiconductors Product specification
3-input EXCLUSIVE-OR gate 74L VC1G386
Philips Semiconductors Product specification
3-input EXCLUSIVE-OR gate 74L VC1G386
RECOMMENDED OPERATING CONDITIONS
LIMITING VALUES accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referencedto GND (ground=0 V).
Notes The input and output voltage ratings may be exceeded if the input and output current ratings are observed. When VCC=0 V (Power-down mode), the output voltage can be 5.5 V in normal operation.
Philips Semiconductors Product specification
3-input EXCLUSIVE-OR gate 74L VC1G386
CHARACTERISTICSAt recommended operating conditions; voltages are referenced to GND (ground=0V).
Philips Semiconductors Product specification
3-input EXCLUSIVE-OR gate 74L VC1G386
Note All typical values are measured at VCC= 3.3 V and Tamb =25 °C.
