74LVC1G17GW ,Single Schmitt-trigger bufferFEATURES DESCRIPTION• Wide supply voltage range from 1.65 V to 5.5 V The 74LVC1G17 is a high-perfor ..
74LVC1G17GW ,Single Schmitt-trigger bufferLogic diagram6. Pinning information6.1 Pinning 74LVC1G1774LVC1G17n.c. 1 6 VCCn.c. 1 5 VCCA 2 5 n.c. ..
74LVC1G17SE-7 , SINGLE SCHMITT-TRIGGER BUFFER
74LVC1G17SE-7 , SINGLE SCHMITT-TRIGGER BUFFER
74LVC1G17W5-7 , SINGLE SCHMITT-TRIGGER BUFFER
74LVC1G17W5-7 , SINGLE SCHMITT-TRIGGER BUFFER
81487EIB ,【15kV ESD Protected, 1/8 Unit Load, 5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers
8155H-2 , 2048-BIT STATIC HMOS RAM WITH I/O PORTS AND TIMER
8169 ,DIGITAL AUDIO PROCESSOR WITH MULTICHANNEL DDX⑩applications with commercial audio D/A converters. The output sampling frequency is fixed at 48 kHz ..
8-188275-4 , AMP Micro-Match Miniature Connector System
81C55 ,2048-Bit CMOS STATIC RAM WITH I/O PORTS AND TIMER
81C55 ,2048-Bit CMOS STATIC RAM WITH I/O PORTS AND TIMER
74LVC1G17GW
Single Schmitt-trigger buffer
Philips Semiconductors Product specification
Single Schmitt-trigger buffer 74L VC1G17
FEATURES Wide supply voltage range from 1.65Vto 5.5V High noise immunity Complies with JEDEC standard: JESD8-7 (1.65Vto 1.95V) JESD8-5 (2.3Vto 2.7V) JESD8B/JESD36 (2.7Vto 3.6V).
•±24 mA output drive (VCC= 3.0V) CMOS low power consumption Latch-up performance exceeds 250 mA Direct interface with TTL levels Unlimited rise and fall times Input accepts voltages up to 5V ESD protection: HBM EIA/JESD22-A114-B exceeds 2000V MM EIA/JESD22-A115-A exceeds 200V. Multiple package options Specified from −40°Cto +85°C and −40°Cto +125 °C.
DESCRIPTIONThe 74LVC1G17 is a high-performance, low-power,
low-voltage, Si-gate CMOS device, superior to most
advanced CMOS compatible TTL families.
The input can be driven from either 3.3Vor5 V devices.
This feature allows the use of this device in a mixed
3.3V and5 V environment.
This device is fully specified for partial power-down
applications using Ioff. TheIoff circuitry disables the output,
preventing the damaging backflow current through the
device when it is powered down.
The 74LVC1G17 provides a buffer function with
Schmitt-trigger action.Itis capableof transforming slowly
changing input signals into sharply defined outputs.
QUICK REFERENCE DATAGND=0 V; Tamb =25 °C; tr =tf≤ 2.5 ns.
Notes CPD is used to determine the dynamic power dissipation (PDin μW). =CPD× VCC2×fi× N+ ∑(CL× VCC2×fo) where:= input frequency in MHz;= output frequency in MHz;= output load capacitance in pF;
VCC= supply voltage in Volts;= number of inputs switching;
∑(CL× VCC2×fo)= sum of the outputs. The condition is VI= GNDto VCC.
Philips Semiconductors Product specification
Single Schmitt-trigger buffer 74L VC1G17
FUNCTION TABLESee note1.
Note H= HIGH voltage level;= LOW voltage level.
ORDERING INFORMATION
PINNING
Philips Semiconductors Product specification
Single Schmitt-trigger buffer 74L VC1G17
Philips Semiconductors Product specification
Single Schmitt-trigger buffer 74L VC1G17
RECOMMENDED OPERATING CONDITIONS
LIMITING VALUES accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referencedto GND (ground=0 V).
Notes The input and output voltage ratings may be exceeded if the input and output current ratings are observed. When VCC=0 V (Power-down mode), the output voltage can be 5.5 V in normal operation.
Philips Semiconductors Product specification
Single Schmitt-trigger buffer 74L VC1G17
CHARACTERISTICSAt recommended operating conditions; voltages are referenced to GND (ground=0 V).
Philips Semiconductors Product specification
Single Schmitt-trigger buffer 74L VC1G17
Note All typical values are measured at maximum VCC and Tamb =25 °C.
Philips Semiconductors Product specification
Single Schmitt-trigger buffer 74L VC1G17
TRANSFER CHARACTERISTICSAt recommended operating conditions; voltages are referenced to GND (ground=0 V).
Note All typical values are measured at Tamb =25 °C.
