74LVC1G00GV ,74LVC1G00; Single 2-input NAND gatefeatures allow the use of these devices in a mixed– JESD8-5 (2.3 V to 2.7 V)3.3 V and 5 V environme ..
74LVC1G00GW ,Single 2-input NAND gatePin configuration SOT886 74LVC1G0074LVC1G00B 1 5 VCCB 1 6 VCC3GNDA 2 5 n.c.A 2 4 YGND 3 4 Y001aaf05 ..
74LVC1G02 ,SINGLE 2 INPUT POSITIVE NOR GATE
74LVC1G02GM ,Single 2-input NOR gateFeatures and benefits Wide supply voltage range from 1.65 V to 5.5 V High noise immunity Complie ..
74LVC1G02GV ,Single 2-input NOR gateLogic diagram74LVC1G02 All information provided in this document is subject to legal disclaimers. ..
74LVC1G02GW ,Single 2-input NOR gateINTEGRATED CIRCUITSDATA SHEET74LVC1G02Single 2-input NOR gateProduct specification 2004 Sep 07Supers ..
80C86 ,Microprocessor, 16 Bit, CMOS, Process Speed 5 and 8MHz
80CNQ035A ,35V 80A Schottky Common Cathode Diode in a D61-8 packageapplications are in switching power supplies, convert-waveformers, free-wheeling diodes, and revers ..
80CNQ040 ,40V 80A Schottky Common Cathode Diode in a D61-8 packageFeaturesThe 80CNQ center tap Schottky rectifier module series hasbeen optimized for very low forwar ..
80CNQ040ASL ,40V 80A Schottky Common Cathode Diode in a D61-8-SL packageFeaturesMajor Ratings and CharacteristicsThe 80CNQ...A center tap Schottky rectifier module series ..
80CNQ045 ,45V 80A Schottky Common Cathode Diode in a D61-8 packagePD-2.216 rev. C 01/9980CNQ... SERIESSCHOTTKY RECTIFIER 80 AmpMajor Ratings and Characteristics De ..
80CNQ045A ,45V 80A Schottky Common Cathode Diode in a D61-8 packageBulletin PD-20038 rev. A 09/0180CNQ...A SERIES80 AmpSCHOTTKY RECTIFIERNew GenIII D-61 Package ..
74LVC1G00GV
74LVC1G00; Single 2-input NAND gate
Philips Semiconductors Product specification
Single 2-input NAND gate 74L VC1G00
FEATURES Wide supply voltage range from 1.65Vto 5.5V High noise immunity Complies with JEDEC standard: JESD8-7 (1.65Vto 1.95V) JESD8-5 (2.3Vto 2.7V) JESD8B/JESD36 (2.7Vto 3.6V).
•±24 mA output drive (VCC= 3.0V) CMOS low power consumption Latch-up performance exceeds 250 mA Direct interface with TTL levels Inputs accept voltages up to 5V Multiple package options ESD protection:
HBM EIA/JESD22-A114-B exceeds 2000V
MM EIA/JESD22-A115-A exceeds 200V. Specified from −40°Cto +85°C and −40°Cto +125 °C.
DESCRIPTIONThe 74LVC1G00 is a high-performance, low-power,
low-voltage, Si-gate CMOS device, superior to most
advanced CMOS compatible TTL families.
Input can be driven from either 3.3Vor5 V devices.
These features allow the use of these devices in a mixed
3.3V and5 V environment.
Schmitttrigger actionatall inputs makesthe circuit tolerant
for slower input rise and fall time.
This device is fully specified for partial power-down
applications using Ioff. TheIoff circuitry disables the output,
preventing the damaging backflow current through the
device when it is powered down.
The 74LVC1G00 provides the single 2-input NAND
function.
QUICK REFERENCE DATAGND=0 V; Tamb =25 °C; tr =tf≤ 2.5 ns.
Notes CPD is used to determine the dynamic power dissipation (PDin μW). =CPD× VCC2×fi× N+ Σ(CL× VCC2×fo) where:= input frequency in MHz;= output frequency in MHz;= output load capacitance in pF;
VCC= supply voltage in Volts;= total switching outputs;
Σ(CL× VCC2×fo)= sum of the outputs. The condition is VI= GNDto VCC.
Philips Semiconductors Product specification
Single 2-input NAND gate 74L VC1G00
FUNCTION TABLESee note1.
Note H= HIGH voltage level;= LOW voltage level.
ORDERING INFORMATION
PINNING
Philips Semiconductors Product specification
Single 2-input NAND gate 74L VC1G00
Philips Semiconductors Product specification
Single 2-input NAND gate 74L VC1G00
RECOMMENDED OPERATING CONDITIONS
LIMITING VALUES accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referencedto GND (ground=0 V).
Notes The input and output voltage ratings may be exceeded if the input and output current ratings are observed. When VCC=0 V (Power-down mode), the output voltage can be 5.5 V in normal operation.
Philips Semiconductors Product specification
Single 2-input NAND gate 74L VC1G00
CHARACTERISTICSAt recommended operating conditions; voltages are referenced to GND (ground=0 V).
Philips Semiconductors Product specification
Single 2-input NAND gate 74L VC1G00
Note All typical values are measured at VCC= 3.3 V and Tamb =25 °C.
Philips Semiconductors Product specification
Single 2-input NAND gate 74L VC1G00
CHARACTERISTICSGND=0 V; tr =tf≤ 2.0 ns.
