LVC11 ,Triple 3-input AND gatePIN CONFIGURATION LOGIC SYMBOL (IEEE/IEC)1&2V1A 114 12CC131B 213 1C 3&4652A 3 12 1Y9&102B 4 11 3C81 ..
LVC11 ,Triple 3-input AND gateLOGIC DIAGRAM (ONE GATE)PINSYMBOL NAME AND FUNCTIONANUMBERB Y1, 3, 9 1A – 3A Data inputsC2, 4, 10 1 ..
LVC126A , QUADRUPLE BUS BUFFER GATE WITH 3-STATE OUTPUTS
LVC126A , QUADRUPLE BUS BUFFER GATE WITH 3-STATE OUTPUTS
LVC126A , QUADRUPLE BUS BUFFER GATE WITH 3-STATE OUTPUTS
LVC138A , 3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS
M3045S , Schottky Barrier Rectifier
M30612E4FP , SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M30612SAFP , SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M30620FCAGP , 16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY / M16C/60 SERIES
M30620FCAGP , 16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY / M16C/60 SERIES
M30620FCMFP , SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
74LVC11D-74LVC11PW-LVC11
Triple 3-input AND gate
Product specification 1998 Apr 28
Philips Semiconductors Product specification
74LVC11Triple 3-input AND gate
FEATURES Wide supply voltage range of 1.2 V to 3.6 V In accordance with JEDEC standard no. 8-1A. Inputs accept voltages up to 5.5 V CMOS low power consumption Direct interface with TTL levels Output capability: standard ICC category: SSI
DESCRIPTIONThe 74LVC11 is a high-performance, low power, low-voltage Si-gate
CMOS device and superior to most advanced CMOS compatible
TTL families.
The 74LVC11 provides the 3-input AND function.
QUICK REFERENCE DATAGND = 0 V; Tamb = 25°C; tr = tf 2.5 ns
NOTES: CPD is used to determine the dynamic power dissipation (PD in μW)
PD = CPD × VCC 2 × fi (CL × VCC 2 × fo) where:
fi = input frequency in MHz; CL = output load capacity in pF;
fo = output frequency in MHz; VCC = supply voltage in V;
(CL × VCC 2 × fo) = sum of the outputs. The condition is VI = GND to VCC.
ORDERING INFORMATION
PIN CONFIGURATION
LOGIC SYMBOL (IEEE/IEC)
Philips Semiconductors Product specification
74LVC11Triple 3-input AND gate
PIN DESCRIPTION
LOGIC SYMBOL
LOGIC DIAGRAM (ONE GATE)
FUNCTION TABLE
NOTES:H = HIGH voltage level
L = LOW voltage level
RECOMMENDED OPERATING CONDITIONS
Philips Semiconductors Product specification
74LVC11Triple 3-input AND gate
ABSOLUTE MAXIMUM RATINGS1In accordance with the Absolute Maximum Rating System (IEC 134)
Voltages are referenced to GND (ground = 0V)
NOTES: Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
DC ELECTRICAL CHARACTERISTICSOver recommended operating conditions voltages are referenced to GND (ground = 0V)
NOTE: All typical values are at VCC = 3.3V and Tamb = 25°C.
Philips Semiconductors Product specification
74LVC11Triple 3-input AND gate
AC CHARACTERISTICSGND = 0 V; tr = tf � 2.5 ns; CL = 50 pF; RL = 500; Tamb = –40C to +85C
NOTE: These typical values are at VCC = 3.3V and Tamb = 25°C.
AC WAVEFORMSVM = 1.5 V at VCC � 2.7 V
VM = 0.5 VCC at VCC < 2.7 V
VOL and VOH are the typical output voltage drop that occur with the
output load.
Waveform 1. Input (nA, nB, nC) to
output (nY) propagation delays.
TEST CIRCUIT
Waveform 2. Load circuitry for switching times.
Philips Semiconductors Product specification
74LVC11Triple 3-input AND gate
SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1
