74LVC08ADB ,Quad 2-input AND gateLOGIC DIAGRAM (ONE GATE)A&132 YB&4SV0041565&98FUNCTION TABLE10INPUTS OUTPUTS&121113nA nB nYSV00436 ..
74LVC08AM ,LOW VOLTAGE CMOS QUAD 2-INPUT AND GATE HIGH PERFORMANCEapplications.■ ESD PERFORMANCE: It can be interfaced to 5V signal environment forHBM > 2000V (MIL S ..
74LVC08AMTR ,LOW VOLTAGE CMOS QUAD 2-INPUT AND GATE HIGH PERFORMANCEAbsolute Maximum Ratings are those values beyond which damage to the device may occur. Functional o ..
74LVC08APW ,Quad 2-input AND gatePIN CONFIGURATION LOGIC SYMBOL1A1A 1 14 1VCC 1Y31B21B 2 13 4B2A42Y1Y 3 12 4A62B52A 4 11 4Y3A93Y83B2 ..
74LVC08ATTR ,LOW VOLTAGE CMOS QUAD 2-INPUT AND GATE HIGH PERFORMANCE74LVC08ALOW VOLTAGE CMOS QUAD 2-INPUT AND GATEHIGH PERFORMANCE ■ 5V TOLERANT INPUTS■ HIGH SPEED: ..
74LVC109D ,Dual JK(not) flip-flop with set and reset; positive-edge triggerGeneral descriptionThe 74LVC109A is a dual positive edge triggered JK flip-flop featuring:• individ ..
8035AHL , HMOS SINGLE-COMPONENT 8-BIT MICROCONTROLLER
8041-05-011 , DIP Reed Relays
8049AH , HMOS SINGLE-COMPONENT 8-BIT MICROCONTROLLER
8080A , 8-Bit Microprocessor
8085AH-2 , 8-Bit HMOS MICROPROCESSORS 3MHz, 5 MHz and 6 MHz Selections Avallable
80C186 , CMOS High-Integration 16-Bit Microprocessors
74LVC08ADB-74LVC08APW-LVC08A
Quad 2-input AND gate
Product specification
IC24 Data Handbook
1997 Jun 30
Philips Semiconductors Product specification
74LVC08AQuad 2-input AND gate
FEATURES Wide supply voltage range of 1.2 V to 3.6 V In accordance with JEDEC standard no. 8-1A Inputs accept voltages up to 5.5 V CMOS low power consumption Direct interface with TTL levels
DESCRIPTIONThe 74LVC08A is a high-performance, low-power, low-voltage,
Si-gate CMOS device and superior to most advanced CMOS
compatible TTL families.
Inputs can be driven from either 3.3 V or 5 V devices. This feature
allows the use of these devices as translators in a mixed 3.3 V/5 V
environment.
The 74LVC08A provides the 2-input AND function.
QUICK REFERENCE DATAGND = 0 V; Tamb = 25°C; tr = tf 2.5 ns
NOTES: CPD is used to determine the dynamic power dissipation
(PD in μW)
PD = CPD × VCC2 × fi (CL × VCC2 × fo) where:
fi = input frequency in MHz; CL = output load capacity in pF;
fo = output frequency in MHz; VCC = supply voltage in V;
(CL × VCC2 × fo) = sum of the outputs. The condition is VI = GND to VCC.
ORDERING INFORMATION
PIN CONFIGURATION
PIN DESCRIPTION
LOGIC SYMBOL
Philips Semiconductors Product specification
74LVC08AQuad 2-input AND gate
LOGIC SYMBOL (IEEE/IEC)
LOGIC DIAGRAM (ONE GATE)
FUNCTION TABLE
NOTES:H = HIGH voltage level
L = LOW voltage level
RECOMMENDED OPERATING CONDITIONS
ABSOLUTE MAXIMUM RATINGS1In accordance with the Absolute Maximum Rating System (IEC 134).
Voltages are referenced to GND (ground = 0V).
NOTES: Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
Philips Semiconductors Product specification
74LVC08AQuad 2-input AND gate
DC CHARACTERISTICSOver recommended operating conditions. Voltages are referenced to GND (ground = 0V).
NOTE: All typical values are at VCC = 3.3V and Tamb = 25°C.
AC CHARACTERISTICSGND = 0 V; tr = tf � 2.5 ns; CL = 50 pF
NOTE: These typical values are at VCC = 3.3V and Tamb = 25°C.
AC WAVEFORMSVM = 1.5 V at VCC � 2.7 V
VM = 0.5 VCC at VCC < 2.7 V
VOL and VOH are the typical output voltage drop that occur with the
output load.
Waveform 1. Input (nA, nB) to output (nY) propagation delays.
TEST CIRCUIT
Philips Semiconductors Product specification
74LVC08AQuad 2-input AND gate
SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1
Philips Semiconductors Product specification
74LVC08AQuad 2-input AND gate
SSOP14: plastic shrink small outline package; 14 leads; body width 5.3 mm SOT337-1
