74LVC06AD ,Hex inverter with open-drain outputsFEATURES DESCRIPTION• 5 V tolerant inputs and outputs (open drain) for The 74LVC06A is a high-perfo ..
74LVC06APW ,Hex inverter with open-drain outputsINTEGRATED CIRCUITSDATA SHEET74LVC06AHex inverter with open-drainoutputsProduct specification 2000 M ..
74LVC07ABQ ,Hex buffer with open-drain outputsPin configuration for DHVQFN1474LVC07A All information provided in this document is subject to lega ..
74LVC07ABQ ,Hex buffer with open-drain outputs
74LVC07AD ,Hex buffer with open-drain outputsLogic diagram for one gate5. Pinning information5.1 Pinning 74LVC07A74LVC07Aterminal 11A 1 14 VCC i ..
74LVC07APW ,Hex buffer with open-drain outputsFunctional description [1]Table 3. Function selectionInput OutputnA nYLLHZ[1] H = HIGH voltage leve ..
8035AHL , HMOS SINGLE-COMPONENT 8-BIT MICROCONTROLLER
8041-05-011 , DIP Reed Relays
8049AH , HMOS SINGLE-COMPONENT 8-BIT MICROCONTROLLER
8080A , 8-Bit Microprocessor
8085AH-2 , 8-Bit HMOS MICROPROCESSORS 3MHz, 5 MHz and 6 MHz Selections Avallable
80C186 , CMOS High-Integration 16-Bit Microprocessors
74LVC06AD-74LVC06APW
Hex inverter with open-drain outputs
Philips Semiconductors Product specification
Hex inverter with open-drain outputs 74LVC06A
FEATURES5 V tolerant inputs and outputs (open drain) for
interfacing with 5 V logic Wide supply voltage range from 1.65to 5.5V CMOS low power consumption Direct interface with TTL levels Inputs accept voltages up to 5V Complies with JEDEC standard no. 8-1A.
DESCRIPTIONThe 74LVC06A is a high-performance, low-power,
low-voltage, Si-gate CMOS device, superior to most
advanced CMOS compatible TTL families.
Inputs can be driven from either 3.3or5 V devices. This
feature allows the useof these devicesas translatorsina
mixed 3.3to5 V environment.
The 74LVC06A provides six inverting buffers.
The outputsof the 74LVC06A devices are open drain and
can be connected to other open-drain outputs to
implement active-LOW wired-OR or active-HIGH
wired-AND functions.
QUICK REFERENCE DATAGND=0 V; Tamb =25 °C; tr =tf≤ 2.5 ns.
Note CPD is used to determine the dynamic power dissipation (PDin μW). =CPD× VCC2×fi+ Σ(CL× VCC2×fo) where:= input frequency in MHz;= output frequency in MHz;= output load capacitance in pF;
VCC= supply voltage in Volts;
Σ(CL× VCC2×fo)= sum of the outputs.
FUNCTION TABLESee note1.
Note H= HIGH voltage level;= LOW voltage level;= high impedance OFF-state.
Philips Semiconductors Product specification
Hex inverter with open-drain outputs 74L VC06A
ORDERING INFORMATION
PINNING
Philips Semiconductors Product specification
Hex inverter with open-drain outputs 74L VC06A
Philips Semiconductors Product specification
Hex inverter with open-drain outputs 74L VC06A
RECOMMENDED OPERATING CONDITIONS
LIMITING VALUES accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referencedto GND (ground=0 V).
Note The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
Philips Semiconductors Product specification
Hex inverter with open-drain outputs 74L VC06A
DC CHARACTERISTICSOver recommended operating conditions; voltages are referenced to GND (ground=0V).
Note All typical values are at VCC= 3.3 V and Tamb =25 °C.
Philips Semiconductors Product specification
Hex inverter with open-drain outputs 74L VC06A
AC CHARACTERISTICSGND=0 V; VCC≤ 2.7 V and tr =tf≤2 ns; VCC≥ 2.7 V and tr =tf≤ 2.5 ns.
Note All typical values are measured at Tamb =25 °C and at VCC respectively 1.8, 2.5, 2.7, 3.3 and 5.0V.
AC WAVEFORMS
Philips Semiconductors Product specification
Hex inverter with open-drain outputs 74L VC06A
