74LS367 ,Hex 3-STATE Buffer/Bus DriverTTL Unit Loads or 60 Low Power Schottky loads when the Enable (E)is LOW.When the Output Enable (E) ..
74LS368 , HEX BUS DROVERS WITH 3-STATE OUTPUTS
74LS368 , HEX BUS DROVERS WITH 3-STATE OUTPUTS
74LS37 ,3-STATE Octal D-Type Transparent Latches and Edge-Triggered Flip-FlopsDM74LS373 • DM74LS374 3-STATE Octal D-Type Transparent Latches and Edge-Triggered Flip-FlopsApril 1 ..
74LS373 ,3-STATE Octal D-Type Transparent Latches and Edge-Triggered Flip-FlopsGeneral Description
These 8-bit registers feature totem-pole 3-STATE outputs
designed specifica ..
74LS374 ,3-STATE Octal D-Type Transparent Latches and Edge-Triggered Flip-FlopsFeaturesThese 8-bit registers feature totem-pole 3-STATE outputs Choice of 8 latches or 8 D-type f ..
79L05ACZ , Three-Terminal Low Current Negative Voltage Regulators
79L06 , TO-92 Plastic-Encapsulate Transistors
79L06 , TO-92 Plastic-Encapsulate Transistors
79L06 , TO-92 Plastic-Encapsulate Transistors
79L06 , TO-92 Plastic-Encapsulate Transistors
79L06 , TO-92 Plastic-Encapsulate Transistors
74LS367
LOW POWER SCHOTTKY
---These devices are high speed hex buffers with 3-state outputs. They
are organized as single 6-bit or 2-bit/4-bit, with inverting or
non-inverting data (D) paths. The outputs are designed to drive 15
TTL Unit Loads or 60 Low Power Schottky loads when the Enable (E)
is LOW.
When the Output Enable (E) is HIGH, the outputs are forced to a
high impedance “off” state. If the outputs of the 3-state devices are tied
together, all but one device must be in the high impedance state to
avoid high currents that would exceed the maximum ratings.
Designers should ensure that Output Enable signals to 3-state devices
whose outputs are tied together are designed so there is no overlap.
GUARANTEED OPERATING RANGES
