
74HCT74D ,Dual D-type flip-flop with set and reset; positive-edge triggerINTEGRATED CIRCUITSDATA SHEETFor a complete data sheet, please also download:• The IC06 74HC/HCT/HC ..
74HCT74DB ,Dual D-type flip-flop with set and reset; positive-edge triggerGENERAL DESCRIPTIONSchmitt-trigger action in the clock input makes the circuitThe 74HC/HCT74 are hi ..
74HCT74N ,Dual D-type flip-flop with set and reset; positive-edge triggerINTEGRATED CIRCUITSDATA SHEETFor a complete data sheet, please also download:• The IC06 74HC/HCT/HC ..
74HCT74PW ,Dual D-type flip-flop with set and reset; positive-edge triggerLogic diagram for one flip-flop74HC_HCT74 All information provided in this document is subject to l ..
74HCT75 ,Quad bistable transparent latch
74HCT7540D ,Octal Schmitt trigger buffer/line driver; 3-state; invertingGENERAL DESCRIPTION jitter-free output signals.The 74HC/HCT7540 are high-speed Si-gate CMOS The “75 ..
75321D , 20A, 55V, 0.036 Ohm, N-Channel UltraFET Power MOSFETs
75321D , 20A, 55V, 0.036 Ohm, N-Channel UltraFET Power MOSFETs
7555IBA , General Purpose Timers
7555IBA , General Purpose Timers
7555IBAZ , General Purpose Timers
7555IPA , General Purpose Timers
74HC74D-74HCT74D-74HCT74DB-74HCT74N
Dual D-type flip-flop with set and reset; positive-edge trigger
Philips Semiconductors Product specification
Dual D-type flip-flop with set and reset;
positive-edge trigger 74HC/HCT74
FEATURES Output capability: standard ICC category: flip-flops
GENERAL DESCRIPTIONThe 74HC/HCT74 are high-speed Si-gate CMOS devices
and are pin compatible with low power Schottky TTL
(LSTTL). They are specified in compliance with JEDEC
standard no. 7A.
The 74HC/HCT74 are dual positive-edge triggered, D-type
flip-flops with individual data (D) inputs, clock (CP) inputs,
set (SD) and reset (RD) inputs; also complementary Q and
Q outputs.
The set and reset are asynchronous active LOW inputs
and operate independently of the clock input. Information
on the data input is transferred to the Q output on the
LOW-to-HIGH transition of the clock pulse. The D inputs
must be stable one set-up time prior to the LOW-to-HIGH
clock transition for predictable operation.
Schmitt-trigger action in the clock input makes the circuit
highly tolerant to slower clock rise and fall times.
QUICK REFERENCE DATAGND = 0 V; Tamb = 25 °C; tr = tf = 6 ns
Notes CPD is used to determine the dynamic power dissipation (PDin μW): = CPD× VCC2×fi +∑ (CL× VCC2×fo) where: = input frequency in MHz = output frequency in MHz (CL× VCC2×fo) = sum of outputs= output load capacitance in pF
VCC= supply voltage in V For HC the condition is VI= GND to VCC
For HCT the condition is VI= GND to VCC− 1.5 V
Philips Semiconductors Product specification
Dual D-type flip-flop with set and reset;
positive-edge trigger 74HC/HCT74
ORDERING INFORMATION
PIN DESCRIPTION
Philips Semiconductors Product specification
Dual D-type flip-flop with set and reset;
positive-edge trigger 74HC/HCT74
FUNCTION TABLE
Note H = HIGH voltage level
L = LOW voltage level
X = don’t care = LOW-to-HIGH CP transition
Qn+1= state after the next LOW-to-HIGH CP transition
Philips Semiconductors Product specification
Dual D-type flip-flop with set and reset;
positive-edge trigger 74HC/HCT74
DC CHARACTERISTICS FOR 74HCFor the DC characteristics see “74HC/HCT/HCU/HCMOS Logic Family Specifications”.
Output capability: standard
ICC category: flip-flops
AC CHARACTERISTICSGND = 0 V; tr = tf = 6 ns; CL = 50 pF
Philips Semiconductors Product specification
Dual D-type flip-flop with set and reset;
positive-edge trigger 74HC/HCT74
DC CHARACTERISTICS FOR 74HCTFor the DC characteristics see “74HC/HCT/HCU/HCMOS Logic Family Specifications”.
Output capability: standard
ICC category: flip-flops
Note to HCT typesThe value of additional quiescent supply current (ΔICC) for a unit load of 1 is given in the family specifications.
To determine ΔICC per input, multiply this value by the unit load coefficient shown in the table below.
AC CHARACTERISTICS FOR 74HCTGND = 0 V; tr = tf = 6 ns; CL = 50 pF
Philips Semiconductors Product specification
Dual D-type flip-flop with set and reset;
positive-edge trigger 74HC/HCT74
AC WAVEFORMS