74HC4053PW ,Triple 2-channel analog multiplexer/demultiplexerGENERAL DESCRIPTIONV - V may not exceed 10.0 V.CC EEThe 74HC/HCT4053 are high-speed Si-gate CMOSFor ..
74HC4059 ,Programmable divide-by-n counterFEATURES In the divide-by-n mode, a clock cycle wide pulse isgenerated with a frequency rate equal ..
74HC4059D ,Programmable divide-by-n counterINTEGRATED CIRCUITSDATA SHEETFor a complete data sheet, please also download:• The IC06 74HC/HCT/HC ..
74HC4060D ,74HC/HCT4060; 14-stage binary ripple counter with oscillatorINTEGRATED CIRCUITSDATA SHEETFor a complete data sheet, please also download:• The IC06 74HC/HCT/HC ..
74HC4060N ,14-stage binary ripple counter with oscillatorFEATURES terminals (RS, R and C ), ten buffered outputs (Q toTC TC 3Q and Q to Q ) and an overridin ..
74HC4060PW ,74HC/HCT4060; 14-stage binary ripple counter with oscillatorGeneral descriptionThe 74HC4060; 74HCT4060 are high-speed Si-gate CMOS device and is pin compatible ..
74LVTH16245ADGGRG4 ,3.3-V ABT 16-BIT BUS TRANSCEIVERS WITH 3-STATE OUTPUTSSN54LVTH16245A,, SN74LVTH16245A3.3-V ABT 16-BIT BUS TRANSCEIVERSWITH 3-STATE OUTPUTS
74LVTH16245ADGVRE4 , 3.3-V ABT 16-BIT BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
74LVTH16245ADGVRE4 , 3.3-V ABT 16-BIT BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
74LVTH16245ADGVRG4 ,3.3-V ABT 16-Bit Bus Transceivers With 3-State Outputs 48-TVSOP -40 to 85FEATURESSN54LVTH16245A . . . WD PACKAGE• Members of the Texas Instruments Widebus™SN74LVTH16245A . ..
74LVTH16245ADLG4 ,3.3-V ABT 16-BIT BUS TRANSCEIVERS WITH 3-STATE OUTPUTSSCBS143R–MAY 1992–REVISED NOVEMBER 2006ORDERING INFORMATION(1)T PACKAGE ORDERABLE PART NUMBER TOP-S ..
74LVTH16245MEA ,Low Voltage 16-Bit Transceiver with 3-STATE Outputsapplications. The device is byte
74HC4053D-74HC4053DB-74HC4053N-74HC4053PW-74HCT4053D-74HCT4053DB-74HCT4053N-74HCT4053PW
Triple 2-channel analog multiplexer/demultiplexer
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
FEATURES Low “ON” resistance:Ω (typ.) at VCC− VEE= 4.5 VΩ (typ.) at VCC− VEE= 6.0 VΩ (typ.) at VCC− VEE= 9.0 V Logic level translation:
to enable 5 V logic to communicate
with± 5 V analog signals Typical “break before make” built in Output capability: non-standard ICC category: MSI
GENERAL DESCRIPTIONThe 74HC/HCT4053 are high-speed Si-gate CMOS
devices and are pin compatible with the “4053” of the
“4000B” series. They are specified in compliance with
JEDEC standard no. 7A.
The 74HC/HCT4053 are triple 2-channel analog
multiplexers/demultiplexers with a common enable input
(E). Each multiplexer/demultiplexer has two independent
inputs/outputs (nY0 and nY1), a common input/output (nZ)
and three digital select inputs (S1 to S3).
With E LOW, one of the two switches is selected (low
impedance ON-state) by S1 to S3. With E HIGH, all
switches are in the high impedance OFF-state,
independent of S1 to S3.
VCC and GND are the supply voltage pins for the digital
control inputs (S1, to S3, and E). The VCC to GND ranges
are 2.0 to 10.0 V for HC and 4.5 to 5.5 V for HCT. The
analog inputs/outputs (nY0 and nY1, and nZ) can swing
between VCC as a positive limit and VEE as a negative limit.
VCC− VEE may not exceed 10.0 V.
For operation as a digital multiplexer/demultiplexer, VEE is
connected to GND (typically ground).
QUICK REFERENCE DATAVEE= GND= 0 V; Tamb =25 °C; tr =tf= 6 ns
Notes CPD is used to determine the dynamic power dissipation (PD in μW): =CPD× VCC2× fi+∑ {(CL+CS)× VCC2× fo} where:= input frequency in MHz; fo= output frequency in MHz
∑ {(CL+CS)× VCC2×fo}= sum of outputs= output load capacitance in pF; CS= max. switch capacitance in pF
VCC= supply voltage in V For HC the condition is VI= GND to VCC
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
ORDERING INFORMATIONSee “74HC/HCT/HCU/HCMOS Logic Package Information”.
PIN DESCRIPTION
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
APPLICATIONS Analog multiplexing and demultiplexing Digital multiplexing and demultiplexing Signal gating
FUNCTION TABLE
Note H= HIGH voltage level= LOW voltage level= don’t care
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
RATINGSLimiting values in accordance with the Absolute Maximum System (IEC 134)
Voltages are referenced to VEE= GND (ground= 0 V)
Note to ratingsTo avoid drawing VCC current out of terminals nZ, when switch current flows in terminals nYn, the voltage drop across
the bidirectional switch must not exceed 0.4 V. If the switch current flows into terminals nZ, no VCC current will flow out
of terminals nYn. In this case there is no limit for the voltage drop across the switch, but the voltages at nYn and nZ may
not exceed VCC or VEE.
RECOMMENDED OPERATING CONDITIONS
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
DC CHARACTERISTICS FOR 74HC/HCTFor 74HC: VCC− GND or VCC− VEE= 2.0, 4.5, 6.0 and 9.0 V
For 74HCT: VCC− GND= 4.5 and 5.5 V; VCC− VEE= 2.0, 4.5, 6.0 and 9.0 V
Notes to the characteristics At supply voltages (VCC− VEE) approaching 2.0 V the analog switch ON-resistance becomes extremely non-linear.
Therefore it is recommended that these devices be used to transmit digital signals only, when using these supply
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
DC CHARACTERISTICS FOR 74HCVoltages are referenced to GND (ground= 0 V)
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
AC CHARACTERISTICS FOR 74HCGND= 0 V; tr =tf= 6 ns; CL= 50 pF
Philips Semiconductors Product specification
Triple 2-channel analog
multiplexer/demultiplexer 74HC/HCT4053
DC CHARACTERISTICS FOR 74HCTVoltages are referenced to GND (ground=0V)
Note to HCT types The value of additional quiescent supply current (ΔICC) for a unit load of 1 is given here.
To determine ΔICC per input, multiply this value by the unit load coefficient shown in the table below.
