74HC1G125GW-74HCT1G125GW Fast Delivery |IC PHOENIX CO.,LIMITED

Home › 7 › 714 > 74HC1G125GW-74HCT1G125GW,Bus buffer/line driver; 3-state

If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email

Partno	Mfg	Dc	Qty	Available	Descript
74HC1G125GW	PHI	N/a	15000	avai	Bus buffer/line driver; 3-state
74HCT1G125GW	PHILIPS飞利	N/a	1860	avai	Bus buffer/line driver; 3-state

74HC1G125GW ,Bus buffer/line driver; 3-statePin configuration. Fig.2 Logic symbol.handbook, halfpageoutYinA2handbook, halfpage41OEOEMNA119MNA1 ..
74HC1G126GV ,Bus buffer/line driver; 3-stateFeaturesn Symmetrical output impedancen High noise immunityn Low power dissipationn Balanced propag ..
74HC1G126GW ,Bus buffer/line driver; 3-statePin configuration. Fig.2 Logic symbol.outYinA241OEOEFig.3 IEC logic symbol. Fig.4
74HC1G14GV ,74HC1G14; 74HCT1G14; Inverting Schmitt-triggersFeatures and benefits Symmetrical output impedance High noise immunity Low power dissipation Ba ..
74HC1G14GW ,Inverting Schmitt triggerPin configuration7.2 Pin description Table 3. Pin descriptionSymbol Pin Descriptionn.c. 1 not conne ..
74HC1G32GV ,2-input OR gatePin configuration. Fig.2 Logic symbol.handbook, halfpageB1handbook, halfpage≥14Y2MNA165 AMNA166Fig ..
74LVC1G10W6-7 , SINGLE 3 INPUT POSITIVE NAND GATE
74LVC1G11DW-7 , SINGLE 3 INPUT POSITIVE AND GATE
74LVC1G11GM ,Single 3-input AND gateFeatures and benefits Wide supply voltage range from 1.65 V to 5.5 V 5 V tolerant inputs for inte ..
74LVC1G11GV ,Single 3-input AND gateLogic diagram74LVC1G11 All information provided in this document is subject to legal disclaimers. ..
74LVC1G11GW ,Single 3-input AND gateGeneral descriptionThe 74LVC1G11 provides a single 3-input AND gate.The input can be driven from ei ..
74LVC1G11W6-7 , SINGLE 3 INPUT POSITIVE AND GATE

74HC1G125GW-74HCT1G125GW
Bus buffer/line driver; 3-state

Philips Semiconductors Product speciﬁcation
Bus buffer/line driver; 3-state 74HC1G125; 74HCT1G125
FEATURES Wide operating voltage:
2.0to 6.0V Symmetrical output impedance High noise immunity Low power dissipation Balanced propagation delays Very small 5 pins package Output capability: bus driver.
DESCRIPTION
The 74HC1G/HCT1G125 is a
high-speed Si-gate CMOS device.
The 74HC1G/HCT1G125 provides
one non-inverting buffer/line driver
with 3-state output. The 3-state output
is controlled by the output enable
input (OE). A HIGH at OE causes the
output as assume a high-impedance
OFF-state.
The bus driver output currents are
equal compared to the
74HC/HCT125.
FUNCTION TABLE
See note 1.
Note H= HIGH voltage level;= LOW voltage level;= don’t care;= high-impedance OFF state.
QUICK REFERENCE DATA
GND=0 V; Tamb =25 °C; tr =tf≤ 6.0 ns.
Notes CPD is used to determine the dynamic power dissipation (PDin μW). =CPD× VCC2×fi+∑ (CL× VCC2×fo) where:= input frequency in MHz;= output frequency in MHz;= output load capacitance in pF;
VCC= supply voltage in V; (CL× VCC2×fo)= sum of outputs. For HC1G the condition is VI= GNDto VCC.
For HCT1G the condition is VI= GNDto VCC− 1.5V.
PINNING
Philips Semiconductors Product speciﬁcation
Bus buffer/line driver; 3-state 74HC1G125; 74HCT1G125
ORDERING INFORMATION
Philips Semiconductors Product speciﬁcation
Bus buffer/line driver; 3-state 74HC1G125; 74HCT1G125
RECOMMENDED OPERATING CONDITIONS
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 134); voltages are referenced to GND (ground=0 V).
Notes The input and output voltage ratings may be exceeded if the input and output current ratings are observed. Above 55 °C the value of PD derates linearly with 2.5 mW/K.
Philips Semiconductors Product speciﬁcation
Bus buffer/line driver; 3-state 74HC1G125; 74HCT1G125
DC CHARACTERISTICS
Family 74HC1G
Additional type data to the recommended operating conditions; voltages are referenced to GND (ground=0 V).
Note All typical values are measured at Tamb =25 °C.
Philips Semiconductors Product speciﬁcation
Bus buffer/line driver; 3-state 74HC1G125; 74HCT1G125
Family 74HCT1G
Additional type data to the recommended operating conditions; voltages are referenced to GND (ground=0 V).
Note All typical values are measured at Tamb =25 °C.
Philips Semiconductors Product speciﬁcation
Bus buffer/line driver; 3-state 74HC1G125; 74HCT1G125
AC CHARACTERISTICS
Type 74HC1G125
GND=0 V; tr =tf≤ 6.0 ns; CL =50pF.
Note All typical values are measured at Tamb =25 °C.
Type 74HCT1G125
GND=0 V; tr =tf≤ 6.0 ns; CL =50pF.
Note All typical values are measured at Tamb =25 °C.
Philips Semiconductors Product speciﬁcation
Bus buffer/line driver; 3-state 74HC1G125; 74HCT1G125
AC WAVEFORMS

TEL:86-533-2716050 FAX:86-533-2716790