74HC153N Fast Delivery |IC PHOENIX CO.,LIMITED

74HC153N ,Dual 4-input multiplexerLogic diagram5. Pinning information5.1 Pinning +&+&7(9+&+&76,6( ..
74HC153PW ,74HC/HCT153; Dual 4-input multiplexerFEATURES The 74HC/HCT153 have two The logic equations for the outputsidentical 4-input multiplexers ..
74HC154 ,4-to-16 line decoder/demultiplexer
74HC154 ,4-to-16 line decoder/demultiplexer
74HC154D ,74HC154; 74HCT154; 4-to-16 line decoder/demultiplexerINTEGRATED CIRCUITSDATA SHEET74HC154; 74HCT1544-to-16 line decoder/demultiplexerProduct speciﬁcatio ..
74HC154N ,74HC154; 74HCT154; 4-to-16 line decoder/demultiplexerINTEGRATED CIRCUITSDATA SHEET74HC154; 74HCT1544-to-16 line decoder/demultiplexerProduct speciﬁcatio ..
74LVC06A ,Hex inverter with open-drain outputs
74LVC06AD ,Hex inverter with open-drain outputsFEATURES DESCRIPTION• 5 V tolerant inputs and outputs (open drain) for The 74LVC06A is a high-perfo ..
74LVC06APW ,Hex inverter with open-drain outputsINTEGRATED CIRCUITSDATA SHEET74LVC06AHex inverter with open-drainoutputsProduct speciﬁcation 2000 M ..
74LVC07ABQ ,Hex buffer with open-drain outputsPin configuration for DHVQFN1474LVC07A All information provided in this document is subject to lega ..
74LVC07ABQ ,Hex buffer with open-drain outputs
74LVC07AD ,Hex buffer with open-drain outputsLogic diagram for one gate5. Pinning information5.1 Pinning 74LVC07A74LVC07Aterminal 11A 1 14 VCC i ..

74HC153N
Dual 4-input multiplexer
1. General description
The 74HC153; 74HCT153 is a dual 4-input multiplexer. The device features independent
enable inputs (nE) and common data select inputs (S0 and S1). For each multiplexer, the
select inputs select one of the four binary inputs and routes it to the multiplexer output
(nY). A HIGH on E forces the corresponding multiplexer outputs LOW. Inputs include
clamp diodes. This enables the use of current limiting resistors to interface inputs to
voltages in excess of VCC.
2. Features and benefits Input levels: For 74HC153: CMOS level For 74HCT153: TTL level Non-inverting outputs Separate enable input for each output Common select inputs Complies with JEDEC standard no. 7A Permits multiplexing from n lines to 1 line Enable line provided for cascading (n lines to 1 line) ESD protection: HBM JESD22-A114F exceeds 2000V MM JESD22-A115-A exceeds 200V Multiple package options Specified from 40 C to +85 C and 40 C to +125 C.
74HC153; 74HCT153
Dual 4-input multiplexer
Rev. 5 — 23 January 2014 Product data sheet
NXP Semiconductors 74HC153; 74HCT153
Dual 4-input multiplexer
3. Ordering information
4. Functional diagram
Table 1. Ordering information
74HC153N 40 C to +125 C DIP16 plastic dual in-line package; 16 leads (300 mil) SOT38-4
74HCT153N
74HC153D 40 C to +125 C SO16 plastic small outline package; 16 leads; body width
3.9 mm
SOT109-1
74HCT153D
74HC153DB 40 C to +125 C SSOP16 plastic shrink small outline package; 16 leads; body
width 5.3 mm
SOT338-1
74HCT153DB
74HC153PW 40 C to +125 C TSSOP16 plastic thin shrink small outline package; 16 leads;
body width 4.4 mm
SOT403-1
74HCT153PW
NXP Semiconductors 74HC153; 74HCT153
Dual 4-input multiplexer
5. Pinning information
5.1 Pinning
NXP Semiconductors 74HC153; 74HCT153
Dual 4-input multiplexer
5.2 Pin description
6. Functional description
7. Limiting values
Table 2. Pin description
1E, 2E 1, 15 output enable inputs (active LOW)
S0, S1 14, 2 data select inputs
1I0, 1I1, 1I2, 1I3 6, 5, 4, 3 data inputs source 1 7 multiplexer output source 1
GND 8 ground (0V) 9 multiplexer output source 2
2I0, 2I1, 2I2, 2I3 10, 11, 12, 13 data inputs source 2
VCC 16 supply voltage
Table 3. Function table
H = HIGH voltage level; L = LOW voltage level; X = don’t care. X XXXXH L L L XXXL L L H XXXL H L XL XXL L L XH XXL H H XXL XL L H XXH XL H H XXXL L L H XXXH L H
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
VCC supply voltage 0.5 +7 V
IIK input clamping current VI < 0.5 V or VI >VCC +0.5 V [1]- 20 mA
IOK output clamping current VO< 0.5 V or VO >VCC +0.5V [1]- 20 mA output current 0.5 V < VO < VCC +0.5V - 25 mA
ICC supply current - 50 mA
IGND ground current 50 - mA
Tstg storage temperature 65 +150 C
NXP Semiconductors 74HC153; 74HCT153
Dual 4-input multiplexer
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For DIP16 package: Ptot derates linearly with 12 mW/K above 70 C.
For SO16 package: Ptot derates linearly with 8 mW/K above 70 C.
For (T)SSOP16 packages: Ptot derates linearly with 5.5 mW/K above 60C.
8. Recommended operating conditions
9. Static characteristics
Ptot total power dissipation [2]
DIP16 package - 750 mW
SO16 and (T)SSOP16
packages 500 mW
Table 4. Limiting values …continued
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Table 5. Recommended operating conditions
Voltages are referenced to GND (ground = 0V)
VCC supply voltage 2.0 5.0 6.0 4.5 5.0 5.5 V input voltage 0 - VCC 0- VCC V output voltage 0 - VCC 0- VCC V
Tamb ambient temperature 40 +25 +125 40 +25 +125 C
t/V input transition rise and fall rate VCC = 2.0 V - - 625 - - - ns/V
VCC = 4.5 V - 1.67 139 - 1.67 139 ns/V
VCC = 6.0 V - - 83 - - - ns/V
Table 6. Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground=0V).
74HC153
VIH HIGH-level
input voltage
VCC = 2.0V 1.5 1.2 - 1.5 - 1.5 - V
VCC = 4.5V 3.15 2.4 - 3.15 - 3.15 - V
VCC = 6.0V 4.2 3.2 - 4.2 - 4.2 - V
VIL LOW-level
input voltage
VCC = 2.0V - 0.8 0.5 - 0.5 - 0.5 V
VCC = 4.5V - 2.1 1.35 - 1.35 - 1.35 V
VCC = 6.0V - 2.8 1.8 - 1.8 - 1.8 V
NXP Semiconductors 74HC153; 74HCT153
Dual 4-input multiplexer
VOH HIGH-level
output voltage
VI = VIH or VIL
IO = 20 A; VCC = 2.0V 1.9 2.0 - 1.9 - 1.9 - V
IO = 20 A; VCC = 4.5V 4.4 4.5 - 4.4 - 4.4 - V
IO = 20 A; VCC = 6.0V 5.9 6.0 - 5.9 - 5.9 - V
IO = 4.0 mA; VCC = 4.5V 3.98 4.32 - 3.84 - 3.7 - V
IO = 5.2 mA; VCC = 6.0V 5.48 5.81 - 5.34 - 5.2 - V
VOL LOW-level
output voltage
VI = VIH or VIL
IO = 20 A; VCC = 2.0V - 0 0.1 - 0.1 - 0.1 V
IO = 20 A; VCC = 4.5V - 0 0.1 - 0.1 - 0.1 V
IO = 20 A; VCC = 6.0V - 0 0.1 - 0.1 - 0.1 V
IO = 4.0 mA; VCC = 4.5V - 0.15 0.26 - 0.33 - 0.4 V
IO = 5.2 mA; VCC = 6.0V - 0.16 0.26 - 0.33 - 0.4 V input leakage
current
VI = VCC or GND;
VCC =6.0V 0.1 - 1- 1 A
ICC supply current VI = VCC or GND; IO =0A;
VCC =6.0V - 8.0 - 80 - 160 A input
capacitance
-3.5 - - - - - pF
74HCT153
VIH HIGH-level
input voltage
VCC = 4.5 V to 5.5V 2.0 1.6 - 2.0 - 2.0 - V
VIL LOW-level
input voltage
VCC = 4.5 V to 5.5V - 1.2 0.8 - 0.8 - 0.8 V
VOH HIGH-level
output voltage
VI = VIH or VIL; VCC = 4.5V
IO = 20A 4.4 4.5 - 4.4 - 4.4 - V
IO = 4.0 mA 3.98 4.32 - 3.84 - 3.7 - V
VOL LOW-level
output voltage
VI = VIH or VIL; VCC = 4.5V
IO = 20 A; VCC = 4.5V - 0 0.1 - 0.1 - 0.1 V
IO = 5.2 mA; VCC = 6.0V - 0.15 0.26 - 0.33 - 0.4 V input leakage
current
VI = VCC or GND;
VCC =5.5V 0.1 - 1- 1 A
ICC supply current VI = VCC or GND; IO =0A;
VCC =5.5V 8 - 80 - 160 A
ICC additional
supply current
per input pin; =VCC 2.1 V; IO =0A;
other inputs at VCC or GND;
VCC= 4.5Vto 5.5V
1In, 2In - 45 162 - 203 - 221 A - 60 216 - 270 - 294 A - 135 486 - 608 - 662 A input
capacitance
-3.5 - - - - - pF
Table 6. Static characteristics …continued
At recommended operating conditions; voltages are referenced to GND (ground=0V).
NXP Semiconductors 74HC153; 74HCT153
Dual 4-input multiplexer
10. Dynamic characteristicsTable 7. Dynamic characteristics
GND = 0 V; tr= tf = 6 ns; CL = 50 pF; for test circuit, see Figure 8; unless otherwise specified
74HC153
tpd propagation
delay
1In to nY, 2In to nY; see
Figure6
[1]
VCC = 2.0 V - 47 145 - 180 - 220 ns
VCC = 4.5 V - 17 29 - 36 - 44 ns
VCC = 5.0 V; CL =15pF - 14 - - - - - ns
VCC = 6.0 V - 14 25 - 31 - 38 ns
Sn to nY; see Figure7
VCC = 2.0 V - 50 150 - 190 - 225 ns
VCC = 4.5 V - 18 30 - 38 - 45 ns
VCC = 5.0 V; CL =15pF - 15 - - - - - ns
VCC = 6.0 V - 14 26 - 33 - 38 nsto nY; see Figure7
VCC = 2.0 V - 33 100 - 125 - 150 ns
VCC = 4.5 V - 12 20 - 25 - 30 ns
VCC = 5.0 V; CL =15pF - 10 - - - - - ns
VCC = 6.0 V - 10 17 - 21 - 26 ns transition time see Figure6 [2]
VCC = 2.0 V - 19 75 - 95 - 110 ns
VCC = 4.5 V - 7 15 - 19 - 22 ns
VCC = 6.0 V - 6 13 - 16 - 19 ns
CPD power
dissipation
capacitance
per package; =GNDto VCC
[3] -30- - - - - pF
74HCT153
tPHL HIGH to LOW
propagation
delay
1In to nY, 2In to nY; see
Figure6
[1]
VCC = 4.5 V - 19 34 - 43 - 51 ns
VCC = 5.0 V; CL =15pF - 16 - - - - - ns
tPLH LOW to HIGH
propagation
delay
1In to nY, 2In to nY; see
Figure6
[1]
VCC = 4.5 V - 13 24 - 30 - 36 ns
VCC = 5.0 V; CL =15pF - 16 - - - - - ns
NXP Semiconductors 74HC153; 74HCT153
Dual 4-input multiplexer
[1] tpd is the same as tPHL and tPLH.
[2] tt is the same as tTHL and tTLH.
[3] CPD is used to determine the dynamic power dissipation (PD in W): =CPD VCC2fi N+  (CL VCC2 fo) where:= input frequency in MHz;= output frequency in MHz;= output load capacitance in pF;
VCC= supply voltage in V;= number of inputs switching;(CL VCC2fo)= sum of outputs.
tpd propagation
delay
Sn to nY; see Figure7 [1]
VCC = 4.5 V - 20 34 - 43 - 51 ns
VCC = 5.0 V; CL =15pF - 17 - - - - - nsto nY; see Figure7 [1]
VCC = 4.5 V - 14 27 - 34 - 41 ns
VCC = 5.0 V; CL =15pF - 11 - - - - - ns transition time see Figure6 [2]
VCC = 4.5 V - 7 15 - 19 - 22 ns
CPD power
dissipation
capacitance
per package; =GNDto VCC 1.5V
[3] -30- - - - - pF
Table 7. Dynamic characteristics …continued
GND = 0 V; tr= tf = 6 ns; CL = 50 pF; for test circuit, see Figure 8; unless otherwise specified
Table 8. Measurement points
74HC153 0.5VCC 0.5VCC 0.1VCC 0.9VCC
74HCT153 1.3V 1.3V 0.1VCC 0.9VCC
NXP Semiconductors 74HC153; 74HCT153
Dual 4-input multiplexer
Table 9. Test data
74HC153 VCC 6.0 ns 15 pF, 50pF tPLH, tPHL
74HCT153 3.0V 6.0 ns 15 pF, 50pF tPLH, tPHL

Partno	Mfg	Dc	Qty	Available	Descript
74HC153N		N/a	643	avai	Dual 4-input multiplexer