74F564SJ ,Octal D-Type Flip-Flop with 3-STATE Outputs74F564 Octal D-Type Flip-Flop with 3-STATE OutputsApril 1983Revised October 200074F564Octal D-Type ..
74F569 ,4-Bit Bidirectional Decade Counter with TRI-STATE Outputs
74F569 ,4-Bit Bidirectional Decade Counter with TRI-STATE Outputs74F5694-BitBidirectionalCounterwithTRI-STATEOutputsAugust199574F5694-BitBidirectionalCounterwithTRI ..
74F569 ,4-Bit Bidirectional Decade Counter with TRI-STATE Outputs74F5694-BitBidirectionalCounterwithTRI-STATEOutputsAugust199574F5694-BitBidirectionalCounterwithTRI ..
74F569PC ,4-Bit Bidirectional Counter with 3-STATE OutputsFunctional DescriptionThe 74F569 counts in the modulo-16 binary sequence. stage counters, the conne ..
74F569SJ ,4-Bit Bidirectional Counter with 3-STATE OutputsFunctional DescriptionThe 74F569 counts in the modulo-16 binary sequence. stage counters, the conne ..
74LCX244WMX ,Low Voltage Buffer/Line Driver with 5V Tolerant Inputs and OutputsFeaturesThe LCX244 contains eight non-inverting buffers with
74F564PC-74F564SJ
Octal D-Type Flip-Flop with 3-STATE Outputs
74F564 Octal D-Type Flip-Flop with 3-STATE Outputs April 1983 Revised October 2000 74F564 Octal D-Type Flip-Flop with 3-STATE Outputs General Description Features The 74F564 is a high-speed, low power octal flip-flop with aInputs and outputs on opposite sides of package allow buffered common Clock (CP) and a buffered common Out- easy interface with microprocessors put Enable (OE). The information presented to the D inputsUseful as input or output port for microprocessors is sorted in the flip-flops on the LOW-to-HIGH Clock (CP) Functionally identical to 74F574 transition. 3-STATE outputs for bus-oriented applications This device is functionally identical to the 74F574, but has inverted outputs. Ordering Code: Order Number Package Number Package Description 74F564SJ M20D 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74F564PC N20A 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbols Connection Diagram IEEE/IEC © 2000 DS009563
