74AHCT1G126GW ,Bus buffer/line driver; 3-stateFEATURES QUICK REFERENCE DATAGround = 0 V; T =25 °C; t =t ≤ 3.0 ns.amb r f• Symmetrical output impe ..
74AHCT1G126GW ,Bus buffer/line driver; 3-statePin configuration SOT891SOT353-1 and SOT75374AHC_AHCT1G126 All information provided in this documen ..
74AHCT1G126GW ,Bus buffer/line driver; 3-stateFunctional description Table 4. Function tableH = HIGH voltage level; L = LOW voltage level; X = do ..
74AHCT1G126SE-7 , SINGLE BUFFER GATE WITH 3-STATE OUTPUT
74AHCT1G126W5-7 , SINGLE BUFFER GATE WITH 3-STATE OUTPUT
74AHCT1G14DBVRE4 ,Single Schmitt-Trigger Inverter Gate 5-SOT-23 -40 to 125ABSOLUTE
74HC393DB ,74HC/HCT393; Dual 4-bit binary ripple counterINTEGRATED CIRCUITSDATA SHEETFor a complete data sheet, please also download:• The IC06 74HC/HCT/HC ..
74HC393N ,Dual 4-bit binary ripple counterLogic diagram (one counter)5. Pinning information5.1 Pinning +& +&7 &3905&34 ..
74HC393PW ,74HC/HCT393; Dual 4-bit binary ripple counterGENERAL DESCRIPTIONThe master resets are active-HIGH asynchronous inputsThe 74HC/HCT393 are high-sp ..
74HC3G07DP ,Triple buffer with open-drain outputsFeatures and benefits Wide supply voltage range from 2.0 V to 6.0 V Input levels: For 74HC3G07: ..
74HC3G07DP ,Triple buffer with open-drain outputsINTEGRATED CIRCUITSDATA SHEET74HC3G07; 74HCT3G07Buffer with open-drain outputsProduct specification ..
74HC3G14DC ,74HC3G14; 74HCT3G14; Inverting Schmitt-triggersApplications Wave and pulse shaper for highly noisy environments Astable multivibrators Monostab ..
74AHCT1G126GW
Bus buffer/line driver; 3-state
Philips Semiconductors Product specification
Bus buffer/line driver; 3-state 74AHC1G126; 74AHCT1G126
FEATURES Symmetrical output impedance High noise immunity ESD protection:
HBM EIA/JESD22-A114-A
exceeds 2000V EIA/JESD22-A115-A
exceeds 200V Low power dissipation Balanced propagation delays Very small 5-pin package Output capability: standard.
DESCRIPTIONThe 74AHC1G/AHCT1G126 is a
high-speed Si-gate CMOS device.
The74AHC1G/AHCT1G126provides
one non-inverting buffer/line driver
with 3-stateoutput. The 3-stateoutput
is controlled by the output enable
input (OE).A LOWat OE causes the
output to assume a high-impedance
OFF-state.
QUICK REFERENCE DATAGround=0 V; Tamb =25 °C; tr =tf≤ 3.0 ns.
Notes CPD is used to determine the dynamic power dissipation (PDin μW). =CPD× VCC2×fi +(CL× VCC2×fo) where:= input frequency in MHz;= output frequency in MHz;= output load capacitance in pF;
VCC= supply voltage in Volts. The condition is VI= GNDto VCC.
FUNCTION TABLESee note 1.
Note H= HIGH voltage level;= LOW voltage level;= don’t care;= high-impedance OFF-state.
ORDERING INFORMATION
Philips Semiconductors Product specification
Bus buffer/line driver; 3-state 74AHC1G126; 74AHCT1G126
PINNING
Philips Semiconductors Product specification
Bus buffer/line driver; 3-state 74AHC1G126; 74AHCT1G126
RECOMMENDED OPERATING CONDITIONS
LIMITING VALUESIn accordance with the Absolute Maximum Rating System (IEC 134); voltages are referenced to GND (ground=0V).
Notes The input and output voltage ratings may be exceeded if the input and output current ratings are observed. Above 55 °C the value of PD derates linearly with 2.5 mW/K.
Philips Semiconductors Product specification
Bus buffer/line driver; 3-state 74AHC1G126; 74AHCT1G126
DC CHARACTERISTICS
Family 74AHC1GOver recommended operating conditions; voltage are referenced to GND (ground=0V).
Philips Semiconductors Product specification
Bus buffer/line driver; 3-state 74AHC1G126; 74AHCT1G126
Family 74AHCT1GOver recommended operating conditions; voltage are referenced to GND (ground=0V).
Philips Semiconductors Product specification
Bus buffer/line driver; 3-state 74AHC1G126; 74AHCT1G126
AC CHARACTERISTICS
Type 74AHC1G126Ground=0 V; tr =tf≤ 3.0 ns.
Notes Typical values at VCC= 3.3V. Typical values at VCC= 5.0V.
Philips Semiconductors Product specification
Bus buffer/line driver; 3-state 74AHC1G126; 74AHCT1G126
Type 74AHCT1G126Ground=0 V; tr =tf≤ 3.0 ns.
Note Typical values at VCC= 5.0V.
AC WAVEFORMS
