74AHCT1G04GV ,InverterGeneral description74AHC1G04 and 74AHCT1G04 are high-speed Si-gate CMOS devices. They provide aninv ..
74AHCT1G04GV ,InverterFEATURES DESCRIPTION• Symmetrical output impedance The 74AHC1G04/74AHCT1G04 are high-speed Si-gateC ..
74AHCT1G04GW ,InverterLogic diagram6. Pinning information6.1 Pinning74AHC1G0474AHCT1G041 5n.c. VCC2AGND 3 4 Y001aaf093Fig ..
74AHCT1G04SE-7 , SINGLE INVERTER GATE
74AHCT1G04W5-7 , SINGLE INVERTER GATE
74AHCT1G08DBVRG4 ,Single 2-Input Positive-AND Gate 5-SOT-23 -40 to 125Features... 18.3 Feature Description...... 72 Applications..... 18.4 Device Functional Modes...... ..
74HC377PW ,74HC/HCT377; Octal D-type flip-flop with data enable; positive-edge triggerapplicationsstandard no. 7A.• Eight positive-edge triggered D-type flip-flopsThe 74HC/HCT377 have e ..
74HC377PW ,74HC/HCT377; Octal D-type flip-flop with data enable; positive-edge triggerGeneral descriptionThe 74HC377; 74HCT377 is an octal positive-edge triggered D-type flip-flop. The ..
74HC390D ,Dual decade ripple counterpin configuration. A HIGH level ondivided into four separately clocked sections. The countersthe nM ..
74HC390N ,Dual decade ripple counterpin configuration. A HIGH level ondivided into four separately clocked sections. The countersthe nM ..
74HC393D ,Dual 4-bit binary ripple counterLogic diagram (one counter)5. Pinning information5.1 Pinning +& +&7 &3905&34 ..
74HC393DB ,74HC/HCT393; Dual 4-bit binary ripple counterINTEGRATED CIRCUITSDATA SHEETFor a complete data sheet, please also download:• The IC06 74HC/HCT/HC ..
74AHCT1G04GV
74AHC1G04; 74AHCT1G04; Inverter
Philips Semiconductors Product specification
Inverter 74AHC1G04; 74AHCT1G04
FEATURES Symmetrical output impedance High noise immunity ESD protection: HBM EIA/JESD22-A114-A exceeds 2000V MM EIA/JESD22-A115-A exceeds 200V CDM EIA/JESD22-C101 exceeds 1000V. Low power dissipation Balanced propagation delays Very small 5-pin package Specified from −40to +85 °C and −40to +125 °C.
DESCRIPTIONThe 74AHC1G04/74AHCT1G04 are high-speed Si-gate
CMOS devices.
The 74AHC1G04/74AHCT1G04 provides the inverting
buffer.
QUICK REFERENCE DATAGND=0 V; Tamb =25 °C; tr =tf≤ 3.0 ns.
Notes CPD is used to determine the dynamic power dissipation (PDin μW). =CPD× VCC2×fi× N+ ∑(CL× VCC2×fo) where:= input frequency in MHz;= output frequency in MHz;= output load capacitance in pF;
VCC= supply voltage in Volts;= total load switching outputs;
∑(CL× VCC2×fo)= sum of outputs. The condition is VI= GNDto VCC.
Philips Semiconductors Product specification
Inverter 74AHC1G04; 74AHCT1G04
FUNCTION TABLESee note1.
Note H= HIGH voltage level;= LOW voltage level.
ORDERING AND PACKAGE INFORMATION
PINNING
Philips Semiconductors Product specification
Inverter 74AHC1G04; 74AHCT1G04
RECOMMENDED OPERATING CONDITIONS
LIMITING VALUES accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referencedto GND (ground=0 V).
Note The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
Philips Semiconductors Product specification
Inverter 74AHC1G04; 74AHCT1G04
DC CHARACTERISTICS
Type 74AHC1G04At recommended operating conditions; voltages are referenced to GND (ground=0V).
Philips Semiconductors Product specification
Inverter 74AHC1G04; 74AHCT1G04
Philips Semiconductors Product specification
Inverter 74AHC1G04; 74AHCT1G04
Philips Semiconductors Product specification
Inverter 74AHC1G04; 74AHCT1G04
Type 74AHCT1G04At recommended operating conditions; voltages are referenced to GND (ground=0V).
