74AHC1G07GW ,Buffer with open-drain outputINTEGRATED CIRCUITSDATA SHEET74AHC1G07; 74AHCT1G07Buffer with open-drain outputProduct specification ..
74AHC1G08GV ,74AHC1G08; 74AHCT1G08; 2-input AND gateGeneral description74AHC1G08 and 74AHCT1G08 are high-speed Si-gate CMOS devices. They provide a2-in ..
74AHC1G08GW ,2-input AND gatePin configuration. Fig.2 Logic symbol.handbook, halfpage1handbook, halfpage inB&42outYMNA114inAMNA ..
74AHC1G08GW-G , 2-input AND gate
74AHC1G09GW ,2-input AND gate with open-drain outputFeatures■ High noise immunity■ Low power dissipation■ SOT353-1 and SOT753 package options■ ESD prot ..
74AHC1G125DBVRE4 ,Single Bus Buffer Gate with 3-State Output 5-SOT-23 -40 to 1257 Specifications(1)7.1 Absolute
74HC32DB ,Quad 2-input OR gateGENERAL DESCRIPTION• Wide supply voltage range from 2.0 to 6.0 V The 74HC/HCT32 is a high-speed Si- ..
74HC32DB ,Quad 2-input OR gateGENERAL DESCRIPTION• Wide supply voltage range from 2.0 to 6.0 V The 74HC/HCT32 is a high-speed Si- ..
74HC32N ,74HC32; 74HCT32; Quad 2-input OR gateINTEGRATED CIRCUITSDATA SHEET74HC32; 74HCT32Quad 2-input OR gateProduct specification 2003 Dec 12Sup ..
74HC32PW ,74HC32; 74HCT32; Quad 2-input OR gatePin configuration DIP14, SO14 and (T)SSOP14 Fig 5.
74HC354 ,8-input multiplexer/register with transparent latches; 3-state
74HC356 ,8-input multiplexer/register; 3-state
74AHC1G07GW
Buffer with open-drain output
Philips Semiconductors Product specification
Buffer with open-drain output 74AHC1G07;
74AHCT1G07
FEATURES High noise immunity ESD protection:
HBM EIA/JESD22-A114-A exceeds 2000V EIA/JESD22-A115-A exceeds 200V Low power dissipation SOT353 package Output capability standard (open drain).
DESCRIPTIONThe 74AHC1G/AHCT1G07is ahigh-speed Si-gate CMOS
device.
The 74AHC1G/AHCT1G07 provides the non-inverting
buffer.
The output of the 74AHC1G/AHCT1G07 devices is an
open drain and can be connected to other open-drain
outputs to implement active-LOW wired-OR or
active-HIGH wired-AND functions. For digital operation
this device must havea pull-up resistorto establisha logic
HIGH-level.
QUICK REFERENCE DATAGND=0 V; Tamb =25 °C; tr =tf≤ 3.0 ns.
Notes CPD is used to determine the dynamic power dissipation (PDin μW). =CPD× VCC2×fi +(CL× VCC2×fo) where:= input frequency in MHz;= output frequency in MHz;= output load capacitance in pF;
VCC= supply voltage in Volts. The condition is VI= GNDto VCC.
FUNCTION TABLESee note1.
Note H= HIGH voltage level;= LOW voltage level;= high impedance OFF-state.
Philips Semiconductors Product specification
Buffer with open-drain output 74AHC1G07;
74AHCT1G07
ORDERING AND PACKAGE INFORMATION
PINNING
Philips Semiconductors Product specification
Buffer with open-drain output 74AHC1G07;
74AHCT1G07
RECOMMENDED OPERATING CONDITIONS
Philips Semiconductors Product specification
Buffer with open-drain output 74AHC1G07;
74AHCT1G07
LIMITING VALUES accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referencedto GND (ground=0 V).
Notes The input and output voltage ratings may be exceeded if the input and output current ratings are observed. Above 55 °C the value of PD derates linearly with 2.5 mW/K.
Philips Semiconductors Product specification
Buffer with open-drain output 74AHC1G07;
74AHCT1G07
DC CHARACTERISTICS
74AHC1G familyOver recommended operating conditions; voltages are referenced to GND (ground=0V).
Philips Semiconductors Product specification
Buffer with open-drain output 74AHC1G07;
74AHCT1G07
74AHCT1G familyOver recommended operating conditions; voltages are referenced to GND (ground=0V).
Philips Semiconductors Product specification
Buffer with open-drain output 74AHC1G07;
74AHCT1G07
AC CHARACTERISTICS
Type 74AHC1G07GND=0 V; tr =tf≤ 3.0 ns.
Notes Typical values at VCC= 3.3V. Typical values at VCC= 5.0V.
Type 74AHCT1G07GND=0 V; tr =tf≤ 3.0 ns.
Note Typical values at VCC= 5.0V.
