74AHC1G06GW ,Inverter with open drain outputFEATURES DESCRIPTION• High noise immunity The 74AHC1G/AHCT1G06 is a high-speed Si-gate CMOSdevice.• ..
74AHC1G07GV ,74AHC1G07; 74AHCT1G07; Buffer with open-drain outputGeneral description74AHC1G07 and 74AHCT1G07 are high-speed Si-gate CMOS devices. They provide anon- ..
74AHC1G07GW ,Buffer with open-drain outputINTEGRATED CIRCUITSDATA SHEET74AHC1G07; 74AHCT1G07Buffer with open-drain outputProduct specification ..
74AHC1G08GV ,74AHC1G08; 74AHCT1G08; 2-input AND gateGeneral description74AHC1G08 and 74AHCT1G08 are high-speed Si-gate CMOS devices. They provide a2-in ..
74AHC1G08GW ,2-input AND gatePin configuration. Fig.2 Logic symbol.handbook, halfpage1handbook, halfpage inB&42outYMNA114inAMNA ..
74AHC1G08GW-G , 2-input AND gate
74HC32DB ,Quad 2-input OR gateGENERAL DESCRIPTION• Wide supply voltage range from 2.0 to 6.0 V The 74HC/HCT32 is a high-speed Si- ..
74HC32DB ,Quad 2-input OR gateGENERAL DESCRIPTION• Wide supply voltage range from 2.0 to 6.0 V The 74HC/HCT32 is a high-speed Si- ..
74HC32N ,74HC32; 74HCT32; Quad 2-input OR gateINTEGRATED CIRCUITSDATA SHEET74HC32; 74HCT32Quad 2-input OR gateProduct specification 2003 Dec 12Sup ..
74HC32PW ,74HC32; 74HCT32; Quad 2-input OR gatePin configuration DIP14, SO14 and (T)SSOP14 Fig 5.
74HC354 ,8-input multiplexer/register with transparent latches; 3-state
74HC356 ,8-input multiplexer/register; 3-state
74AHC1G06GW
Inverter with open drain output
Philips Semiconductors Product specification
Inverter with open-drain output 74AHC1G06;
74AHCT1G06
FEATURES High noise immunity ESD protection:
HBM EIA/JESD22-A114-A exceeds 2000V EIA/JESD22-A115-A exceeds 200V Low power dissipation SOT353 package Output capability standard (open drain).
DESCRIPTIONThe 74AHC1G/AHCT1G06is ahigh-speed Si-gate CMOS
device.
The 74AHC1G/AHCT1G06 provides the inverting buffer.
The output of the 74AHC1G/AHCT1G06 devices is an
open drain and can be connected to other open-drain
outputs to implement active-LOW, wired-OR or
active-HIGH wired-AND functions. For digital operation
this device must havea pull-up resistorto establisha logic
HIGH-level.
QUICK REFERENCE DATAGND=0 V; Tamb =25 °C; tr =tf≤ 3.0 ns.
Notes CPD is used to determine the dynamic power dissipation (PDin μW). =CPD× VCC2×fi +(CL× VCC2×fo) where:= input frequency in MHz;= output frequency in MHz;= output load capacitance in pF;
VCC= supply voltage in Volts. The condition is VI= GNDto VCC.
FUNCTION TABLESee note1.
Note H= HIGH voltage level;= LOW voltage level;= high impedance OFF-state.
Philips Semiconductors Product specification
Inverter with open-drain output 74AHC1G06;
74AHCT1G06
ORDERING AND PACKAGE INFORMATION
PINNING
Philips Semiconductors Product specification
Inverter with open-drain output 74AHC1G06;
74AHCT1G06
RECOMMENDED OPERATING CONDITIONS
Philips Semiconductors Product specification
Inverter with open-drain output 74AHC1G06;
74AHCT1G06
LIMITING VALUES accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referencedto GND (ground=0 V).
Notes The input and output voltage ratings may be exceeded if the input and output current ratings are observed. Above 55 °C the value of PD derates linearly with 2.5 mW/K.
Philips Semiconductors Product specification
Inverter with open-drain output 74AHC1G06;
74AHCT1G06
DC CHARACTERISTICS
74AHC1G familyOver recommended operating conditions; voltages are referenced to GND (ground=0V).
Philips Semiconductors Product specification
Inverter with open-drain output 74AHC1G06;
74AHCT1G06
74AHCT1G familyOver recommended operating conditions; voltages are referenced to GND (ground=0V).
Philips Semiconductors Product specification
Inverter with open-drain output 74AHC1G06;
74AHCT1G06
AC CHARACTERISTICS
Type 74AHC1G06GND=0 V; tr =tf≤ 3.0 ns.
Notes Typical values at VCC= 3.3V. Typical values at VCC= 5.0V.
Type 74AHCT1G06GND=0 V; tr =tf≤ 3.0 ns.
Note Typical values at VCC= 5.0V.
