Frequency Shift Keying FSK/Amplitude Shift Keying ASK receiver The part **UAA3220TS** is a **BiCMOS integrated circuit** designed for **infrared remote control receivers**. Below are the manufacturer specifications, descriptions, and features:
### **Manufacturer Specifications:**
- **Manufacturer:** NXP Semiconductors (formerly Philips Semiconductors)
- **Package:** SO8 (Small Outline 8-pin package)
- **Operating Voltage:** 2.5V to 5.5V
- **Supply Current (Typical):** 0.35 mA (at 3V)
- **Operating Temperature Range:** -25°C to +85°C
- **Carrier Frequency Range:** 30 kHz to 60 kHz
- **Data Rate:** Up to 4 kbps
- **Input Sensitivity:** 3 mV (typical at 38 kHz)
- **Output Type:** Active Low (Open Drain)
### **Description:**
The **UAA3220TS** is a low-power infrared (IR) remote control receiver IC designed for **consumer electronics applications**. It integrates a **pre-amplifier, automatic gain control (AGC), bandpass filter, and demodulator** to decode modulated IR signals. It is optimized for **38 kHz carrier frequency** (commonly used in IR remotes) but supports a wide frequency range.
### **Features:**
- **Low power consumption** (suitable for battery-operated devices)
- **Wide supply voltage range** (2.5V to 5.5V)
- **High immunity against ambient light disturbances**
- **Built-in AGC for stable performance under varying signal strengths**
- **Open-drain output for direct microcontroller interfacing**
- **Small SO8 package for space-constrained designs**
- **Compatible with standard IR remote control protocols (e.g., RC-5, NEC)**
- **No external components required for basic operation (except a decoupling capacitor)**
This information is based on the manufacturer's datasheet for the **UAA3220TS**.