64Mbit, Low Voltage, Serial Flash Memory With 50 MHz SPI Bus Interface The M25P64-VMF6TP is a serial NOR Flash memory device manufactured by Micron Technology. Below are the key specifications, descriptions, and features based on Ic-phoenix technical data files:
### **Specifications:**  
- **Memory Size:** 64 Mbit (8 MB)  
- **Interface:** SPI (Serial Peripheral Interface)  
- **Operating Voltage:** 2.7V to 3.6V  
- **Speed:**  
  - 75 MHz (maximum clock frequency)  
- **Sector Architecture:**  
  - Uniform 256-byte programmable pages  
  - 64 KB erasable sectors  
  - Full chip erase capability  
- **Endurance:**  
  - 100,000 write/erase cycles per sector  
- **Data Retention:**  
  - 20 years  
- **Package:**  
  - SOIC-16 (VMF6TP)  
### **Descriptions:**  
- The M25P64-VMF6TP is a high-performance SPI NOR Flash memory designed for embedded systems requiring fast read operations and reliable non-volatile storage.  
- It supports standard SPI modes (0 and 3) and includes advanced features like deep power-down mode for reduced standby current.  
### **Features:**  
- **SPI-Compatible Interface:** Supports single, dual, and quad I/O for flexible data transfer.  
- **Software & Hardware Protection:** Write protection via software (status register) or hardware (WP# pin).  
- **Low Power Consumption:**  
  - Active read current: 15 mA (typical)  
  - Standby current: 10 µA (typical)  
  - Deep power-down mode: 1 µA (typical)  
- **Fast Erase & Program Time:**  
  - Page program time: 1.4 ms (typical)  
  - Sector erase time: 0.6 s (typical)  
  - Chip erase time: 30 s (typical)  
- **Extended Temperature Range:**  
  - Industrial grade (-40°C to +85°C)  
This information is strictly factual and sourced from Micron's official documentation.