16-Bit, 135ksps, Single-Supply ADCs with Bipolar Analog Input Range The MAX1187BCUI is a 10-bit, 40Msps analog-to-digital converter (ADC) manufactured by Maxim Integrated. Below are its key specifications, descriptions, and features:
### **Specifications:**
- **Resolution:** 10-bit  
- **Sampling Rate:** 40Msps (Mega samples per second)  
- **Input Voltage Range:** 1Vpp (1 Volt peak-to-peak)  
- **Power Supply:** Single +3V or +5V operation  
- **Power Consumption:** 135mW (typical at 40Msps, +3V supply)  
- **DNL (Differential Non-Linearity):** ±0.5 LSB (max)  
- **INL (Integral Non-Linearity):** ±1 LSB (max)  
- **SNR (Signal-to-Noise Ratio):** 58dB (typical at 10MHz input)  
- **SFDR (Spurious-Free Dynamic Range):** 70dB (typical at 10MHz input)  
- **Operating Temperature Range:** -40°C to +85°C  
- **Package:** 28-pin TSSOP (Thin Shrink Small Outline Package)  
### **Descriptions:**
The MAX1187BCUI is a high-performance, low-power 10-bit ADC designed for applications requiring high-speed data conversion with minimal power consumption. It features an internal track-and-hold (T/H) circuit, ensuring accurate signal acquisition at high sampling rates. The device operates from a single +3V or +5V supply, making it suitable for portable and battery-powered applications.
### **Features:**
- **High-Speed Conversion:** 40Msps sampling rate  
- **Low Power Consumption:** 135mW at +3V supply  
- **Wide Input Bandwidth:** 300MHz (full-power)  
- **Internal Reference:** On-chip 1.024V bandgap reference  
- **Differential or Single-Ended Input:** Configurable input mode  
- **Digital Outputs:** CMOS-compatible, 3.3V or 5V logic levels  
- **Power-Down Mode:** Reduces power consumption when inactive  
- **Pin-Compatible Upgrade:** Compatible with MAX1186 (lower-speed variant)  
This ADC is commonly used in applications such as medical imaging, communications, and high-speed data acquisition systems.  
(Source: Maxim Integrated datasheet for MAX1187BCUI)