512 Kbit to 32 Mbit, Low Voltage, Serial Flash Memory With 40 MHz or 50 MHz SPI Bus Interface The M25P16-VMN6TG is a serial flash memory device manufactured by STMicroelectronics (ST). Here are the factual specifications, descriptions, and features from Ic-phoenix technical data files:
### **Manufacturer:**  
STMicroelectronics (ST)  
### **Part Number:**  
M25P16-VMN6TG  
### **Specifications:**  
- **Memory Type:** NOR Flash  
- **Density:** 16 Mbit (2 MB)  
- **Interface:** SPI (Serial Peripheral Interface)  
- **Supply Voltage:** 2.7V to 3.6V  
- **Operating Temperature Range:** -40°C to +85°C  
- **Speed:**  
  - Clock Frequency: Up to 50 MHz  
  - Data Transfer Rate: 50 Mbit/s  
- **Sector Architecture:**  
  - Uniform 256-byte programmable pages  
  - 32 sectors of 64 KB each  
  - Supports sector erase (64 KB), block erase (32 KB), and full-chip erase  
- **Write/Erase Endurance:**  
  - 100,000 write/erase cycles per sector  
- **Data Retention:**  
  - 20 years  
### **Descriptions:**  
- The M25P16-VMN6TG is a 16 Mbit (2 MB) serial flash memory device with a high-speed SPI interface.  
- It is designed for applications requiring non-volatile storage with low power consumption and high reliability.  
- The device supports flexible erase and programming operations, making it suitable for firmware storage, configuration data, and code shadowing.  
### **Features:**  
- **SPI-Compatible Interface:** Supports SPI modes 0 and 3.  
- **Deep Power-Down Mode:** Ultra-low standby current consumption.  
- **Software and Hardware Write Protection:** Protects sectors from unintended writes.  
- **Electronic Signature:** Includes JEDEC-standard manufacturer and device ID for identification.  
- **Page Programming:** 256-byte page programming capability.  
- **Fast Erase and Program Times:**  
  - Sector erase time: 3s (typical)  
  - Page programming time: 1.4ms (typical)  
- **Package:** SO8 (150 mil width)  
This information is based on the manufacturer's datasheet and technical documentation.