IR2113-2

High and Low Side Driver, All High Voltage Pins On One Side, Separate Logic and Power Ground, Shut-Down, High Creepage Package in a 16-pin DIP -2 leads package The IR2113-2 is a high-voltage, high-speed power MOSFET and IGBT driver from International Rectifier (IRF).  

### **Specifications:**  
- **Manufacturer:** International Rectifier (IRF)  
- **Output Configuration:** Dual, independent high-side and low-side drivers  
- **Output Current:** 2A (source/sink)  
- **Voltage Range:**  
  - **High-Side Floating Supply Voltage (V_B):** Up to 600V  
  - **Logic Supply Voltage (V_DD):** 10V to 20V  
  - **Logic Input Voltage (V_IN):** 3.3V to 20V (TTL/CMOS compatible)  
- **Propagation Delay:** ~120ns (typical)  
- **Dead Time (Between High & Low Outputs):** ~520ns (typical)  
- **Operating Temperature Range:** -40°C to +125°C  
- **Package:** 14-lead PDIP, SOIC  

### **Descriptions:**  
- The IR2113-2 is designed for driving high-side and low-side N-channel MOSFETs or IGBTs in half-bridge configurations.  
- It features independent high and low-side referenced output channels with matched propagation delays.  
- Includes under-voltage lockout (UVLO) protection for both high-side and low-side drivers.  

### **Features:**  
- **Floating High-Side Drive:** Allows driving high-side MOSFETs/IGBTs in half-bridge or full-bridge applications.  
- **CMOS Schmitt-Triggered Inputs:** Ensures noise immunity.  
- **Matched Propagation Delays:** Minimizes dead time in switching applications.  
- **Low Power Consumption:** Optimized for efficiency.  
- **Cross-Conduction Prevention:** Built-in dead time to prevent shoot-through.  

This driver is commonly used in motor control, power inverters, and switch-mode power supplies.

High and Low Side Driver, All High Voltage Pins On One Side, Separate Logic and Power Ground, Shut-Down, High Creepage Package in a 16-pin DIP -2 leads package