High and Low Side Driver, All High Voltage Pins On One Side, Separate Logic and Power Ground, Shut-Down in a 14-pin DIP package The IR2110PBF is a high-voltage, high-speed power MOSFET and IGBT driver from Infineon Technologies.  

### **Specifications:**  
- **Voltage Rating:**  
  - High-side floating supply voltage: Up to 500V  
  - Logic supply voltage (VDD): 10V to 20V  
  - Output supply voltage (VCC): 10V to 20V  
- **Current Capability:**  
  - Peak output current: ±2A  
- **Switching Speed:**  
  - Rise time (typical): 120ns  
  - Fall time (typical): 94ns  
- **Operating Frequency:** Up to several hundred kHz  
- **Dead Time (Internal):** None (requires external control)  
- **Logic Input Compatibility:** 3.3V, 5V, and 15V logic levels  
- **Protection Features:**  
  - Under-voltage lockout (UVLO) for both channels  
  - Matched propagation delays for high-side and low-side  
- **Package:** PDIP-16  

### **Descriptions:**  
The IR2110PBF is a dual-channel driver designed for high-side and low-side switching in half-bridge or full-bridge configurations. It integrates independent high- and low-side referenced output channels with a high-voltage level-shifting circuit.  

### **Features:**  
- **Independent High- and Low-Side Driver Channels**  
- **Floating High-Side Driver for Bootstrap Operation**  
- **CMOS Schmitt-Triggered Inputs with Hysteresis**  
- **3.3V Logic Compatible**  
- **Matched Propagation Delay for Both Channels**  
- **Low Power Consumption**  
- **Cross-Conduction Prevention (Requires External Dead-Time Control)**  

This driver is commonly used in motor control, power inverters, and switch-mode power supplies.  

(Source: Infineon IR2110 datasheet)

High and Low Side Driver, All High Voltage Pins On One Side, Separate Logic and Power Ground, Shut-Down in a 14-pin DIP package