IC Phoenix logo

Home ›  D  › D22 > DS1233-10

DS1233-10 from 达拉斯

Fast Delivery, Competitive Price @IC-phoenix

If you need more electronic components or better pricing, we welcome any inquiry.

DS1233-10

Manufacturer: 达拉斯, DS, DALLAS

5V EconoReset

Partnumber Manufacturer Quantity Availability
DS1233-10,DS123310 达拉斯, DS, DALLAS 32752 In Stock

Description and Introduction

5V EconoReset The DS1233-10 is a nonvolatile (NV) controller chip manufactured by Dallas Semiconductor (now Maxim Integrated). Here are its key specifications:

- **Function**: Monitors power supply voltage and provides microprocessor (μP) supervision.
- **Voltage Monitoring**: Triggers a reset if VCC falls below 4.75V (typical threshold for the -10 variant).
- **Reset Timing**: Ensures a 350ms (minimum) reset pulse upon power-up or voltage drop.
- **Nonvolatile Features**: Includes an integrated 256k NV SRAM controller for data retention during power loss.
- **Operating Voltage Range**: 4.5V to 5.5V.
- **Temperature Range**: Commercial (0°C to +70°C) and Industrial (-40°C to +85°C) options.
- **Package**: 28-pin DIP or SOIC.
- **Additional Features**: 
  - Manual reset input.
  - Battery backup support for SRAM.
  - Power-fail comparator for early warning of voltage drops.

For exact tolerances or detailed electrical characteristics, refer to the official datasheet.

Application Scenarios & Design Considerations

5V EconoReset# DS123310 Technical Documentation

## 1. Application Scenarios

### Typical Use Cases
The DS123310 is primarily employed in  precision timing and control applications  where reliable microcontroller supervision is critical. Common implementations include:

-  System Reset Control : Provides automatic processor reset during power-up, power-down, and brownout conditions
-  Watchdog Timer Applications : Monitors system activity and triggers reset if software fails to periodically service the timer
-  Power Monitoring : Detects out-of-tolerance power supply conditions and maintains system stability
-  Battery-Backed Memory Protection : Prevents data corruption in non-volatile memory during power transitions

### Industry Applications
 Automotive Systems : Engine control units, infotainment systems, and advanced driver assistance systems (ADAS) where reliable microprocessor supervision is mandatory for safety-critical operations.

 Industrial Automation : Programmable logic controllers (PLCs), motor drives, and process control systems requiring robust fault recovery mechanisms in harsh environments.

 Medical Equipment : Patient monitoring devices, diagnostic instruments, and therapeutic equipment where system reliability directly impacts patient safety.

 Telecommunications : Network switches, routers, and base station equipment requiring continuous operation and automatic recovery from software hangs.

### Practical Advantages and Limitations

 Advantages: 
-  High Reliability : Operates effectively across wide temperature ranges (-40°C to +85°C)
-  Low Power Consumption : Typically <50μA standby current, ideal for battery-operated devices
-  Precision Timing : Accurate watchdog and reset timing with ±10% tolerance
-  Simple Integration : Minimal external components required for full functionality

 Limitations: 
-  Fixed Timing Parameters : Watchdog timeout and reset pulse width are manufacturer-set and not user-programmable
-  Voltage Threshold Specificity : Optimized for specific supply voltage ranges (typically 3.3V or 5V systems)
-  Limited Customization : Cannot be reconfigured for specialized timing requirements without external circuitry

## 2. Design Considerations

### Common Design Pitfalls and Solutions

 Pitfall 1: Improper Power Sequencing 
-  Issue : Reset assertion during valid power conditions due to slow power supply ramp rates
-  Solution : Ensure power supply ramp time meets DS123310 specifications (typically <100ms) or use external RC network to adjust reset threshold

 Pitfall 2: Watchdog Timer Misuse 
-  Issue : Software fails to service watchdog within timeout period, causing unnecessary system resets
-  Solution : Implement structured watchdog service routines and validate timing in worst-case execution scenarios

 Pitfall 3: Reset Signal Integrity 
-  Issue : Reset line noise causing false triggering or inadequate reset pulse width
-  Solution : Implement proper bypass capacitance (0.1μF ceramic close to VCC pin) and consider series termination for long PCB traces

### Compatibility Issues

 Microcontroller Interfaces: 
- Compatible with most CMOS and TTL logic families
- May require level translation when interfacing with 1.8V or lower voltage processors
- Ensure reset output drive capability matches microcontroller input requirements

 Power Supply Considerations: 
- Optimal performance with regulated 3.3V or 5V supplies
- May exhibit reduced accuracy with switching regulators having high ripple content
- Requires clean power supply with <100mV noise for reliable operation

### PCB Layout Recommendations

 Power Distribution: 
- Place 0.1μF ceramic decoupling capacitor within 5mm of VCC pin
- Use separate power planes for analog and digital sections when possible
- Implement star-point grounding for noise-sensitive applications

 Signal Routing: 
- Route reset output as a controlled impedance trace with minimal length
- Avoid parallel routing with high-speed digital signals or clock lines
- Maintain 3W rule spacing between reset line and potential noise sources

 Thermal Management: 
- Provide adequate copper pour for heat dissipation in high-temperature

Alternative Part Number

  • MAX803SQ463T1G --: Pin-compatible 3-pin voltage supervisor with active-low reset, similar threshold and open-drain output, widely available and cost-effective.
  • MCP130-450DI/TO --: 3-pin TO-92 reset supervisor with comparable trip voltage and active-low push-pull output, suitable drop-in replacement in most circuits.
  • APX803L-40SA-7 --: Low-cost 3-pin voltage supervisor with similar reset threshold and open-drain output, good alternative when exact threshold tolerance is not critical.
  • TL7705ACPA --: Classic supply voltage supervisor/reset generator with adjustable threshold, suitable where the DS1233-10 reset function is needed.
  • MAX803SQ308T1G --: 3-pin voltage supervisor with active-low reset output, functionally similar to the DS1233-10 reset supervisor and widely available.
  • MCP130-300DI/TO --: 3-pin voltage supervisor with 3.0V trip point and open-drain reset output, a direct functional replacement for the DS1233-10.
  • TPS3808G30DBVR --: Adjustable 3.0V voltage supervisor with programmable delay and active-low reset, suitable as a modern substitute for the DS1233-10.
  • MAX803L --: Pin-compatible 3-pin microprocessor reset supervisor with similar active-low reset and 4.63V threshold, widely used as a direct substitute.
  • MCP130-475 --: 3-pin voltage supervisor with active-low reset and comparable threshold, offering similar functionality in the same package family.
  • TPS3809L30 --: Low-cost 3-pin reset IC with active-low output and similar threshold range, suitable replacement for basic reset supervision.

Request Quotation

For immediate assistance, call us at +86 533 2716050 or email [email protected]

Part Number Quantity Target Price($USD) Email Contact Person
We offer highly competitive channel pricing. Get in touch for details.

Specializes in hard-to-find components chips