IC Phoenix logo

Home ›  D  › D18 > DO3316H-102MLD

DO3316H-102MLD from COILCRAFT

Fast Delivery, Competitive Price @IC-phoenix

If you need more electronic components or better pricing, we welcome any inquiry.

DO3316H-102MLD

Manufacturer: COILCRAFT, COILCRA

SMT Power Inductors - DO3316H Series

Partnumber Manufacturer Quantity Availability
DO3316H-102MLD,DO3316H102MLD COILCRAFT, COILCRA 5111 In Stock

Description and Introduction

SMT Power Inductors - DO3316H Series **Introduction to the DO3316H-102MLD Inductor**  

The **DO3316H-102MLD** is a high-performance surface-mount inductor designed for modern electronic applications requiring efficient power management and signal filtering. With a compact **3.3mm × 3.2mm × 1.6mm** footprint, this component is well-suited for space-constrained designs, such as those found in mobile devices, power supplies, and RF circuits.  

Featuring an inductance value of **1.0µH (±20%)**, the DO3316H-102MLD offers robust performance under high-current conditions, with a saturation current rating of **3.0A** and a DC resistance (DCR) as low as **0.045Ω**. Its shielded construction minimizes electromagnetic interference (EMI), enhancing circuit stability and reliability.  

Engineered for durability, this inductor operates efficiently across a wide temperature range (**-40°C to +125°C**) and is compatible with automated assembly processes, making it ideal for high-volume production. Its lead-free and RoHS-compliant construction ensures adherence to environmental regulations.  

The DO3316H-102MLD is commonly used in DC-DC converters, voltage regulators, and noise suppression circuits, where consistent inductance and low power loss are critical. Its balance of size, performance, and reliability makes it a preferred choice for designers seeking efficient power solutions in compact electronic systems.

Application Scenarios & Design Considerations

SMT Power Inductors - DO3316H Series# Technical Documentation: DO3316H102MLD Power Inductor

## 1. Application Scenarios

### Typical Use Cases
The DO3316H102MLD is a 1.0μH shielded power inductor designed for high-frequency power management applications. Typical use cases include:

 DC-DC Converters 
- Buck converters operating at 500kHz to 3MHz switching frequencies
- Boost converters for voltage step-up applications
- Point-of-load (POL) converters in distributed power architectures
- LDO replacement circuits for improved efficiency

 Power Supply Filtering 
- Input filter circuits for switching regulators
- Output filtering to reduce ripple voltage
- EMI suppression in power delivery networks
- Noise suppression in analog and digital circuits

### Industry Applications
 Consumer Electronics 
- Smartphones and tablets for processor power delivery
- Wearable devices requiring compact power solutions
- Laptop computers for CPU/GPU power circuits
- Gaming consoles and portable entertainment systems

 Telecommunications 
- Network equipment power supplies
- Base station power management
- Router and switch power circuits
- 5G infrastructure equipment

 Industrial Systems 
- PLCs and industrial controllers
- Motor drive circuits
- Sensor interface power supplies
- Test and measurement equipment

 Automotive Electronics 
- Infotainment systems
- Advanced driver assistance systems (ADAS)
- Body control modules
- Lighting control circuits

### Practical Advantages and Limitations
 Advantages: 
-  High Saturation Current : 4.8A rating supports high current applications
-  Low DCR : 14.5mΩ typical reduces power losses
-  Shielded Construction : Minimizes EMI radiation and susceptibility
-  Compact Size : 3.3×3.3×1.6mm footprint saves board space
-  High Temperature Operation : -40°C to +125°C suitable for harsh environments
-  Automotive Grade : AEC-Q200 qualified for automotive applications

 Limitations: 
-  Limited Inductance Range : Fixed 1.0μH value may not suit all applications
-  Current Handling : Not suitable for ultra-high current applications (>5A)
-  Frequency Limitations : Performance degrades above 5MHz
-  Cost Considerations : Higher cost compared to unshielded alternatives

## 2. Design Considerations

### Common Design Pitfalls and Solutions
 Pitfall 1: Saturation Current Misapplication 
-  Problem : Operating near Isat causes inductance drop and core saturation
-  Solution : Design with 20-30% margin below Isat rating
-  Detection : Monitor output ripple increase and efficiency degradation

 Pitfall 2: Thermal Management Issues 
-  Problem : Excessive temperature rise due to I²R losses
-  Solution : Ensure adequate airflow and consider thermal vias
-  Detection : Use thermal imaging or temperature sensors

 Pitfall 3: EMI Problems 
-  Problem : Radiated emissions from switching noise
-  Solution : Proper grounding and use of the built-in magnetic shield
-  Detection : Conduct pre-compliance EMC testing

### Compatibility Issues with Other Components
 Semiconductor Compatibility 
-  MOSFETs : Compatible with most modern power MOSFETs
-  Controllers : Works well with industry-standard PWM controllers
-  Diodes : No compatibility issues with Schottky or synchronous rectifiers

 Passive Component Interactions 
-  Capacitors : Optimal with low-ESR ceramic capacitors
-  Resistors : No significant interaction concerns
-  Other Inductors : Avoid close placement to prevent magnetic coupling

### PCB Layout Recommendations
 Placement Guidelines 
- Position close to switching IC (within 10mm recommended)
- Orient to minimize loop areas in high-current paths
- Maintain minimum 2mm clearance from other magnetic components

 Routing Considerations 
- Use wide

Alternative Part Number

  • MSS1260-102MLB --: Shielded power inductor with the same 1 mH inductance and similar current rating, offering a drop-in style alternative with lower EMI.
  • SRR1260-102M --: 1 mH shielded power inductor in a comparable 12x12 mm footprint, widely available and electrically similar to the original.
  • 7447711102 --: 1 mH shielded power inductor from the WE-PD series with comparable saturation current and size, suitable as a cross-manufacturer replacement.
  • MSS1038-102MLB --: Shielded power inductor with 1 mH inductance in a similar 10x10 mm footprint, offering comparable current rating and low DC resistance as a direct functional substitute.
  • 7447715102 --: 1 mH shielded power inductor from the WE-PD series with comparable size and current handling, suitable as a cross-manufacturer replacement.

Request Quotation

For immediate assistance, call us at +86 533 2716050 or email [email protected]

Part Number Quantity Target Price($USD) Email Contact Person
We offer highly competitive channel pricing. Get in touch for details.

Specializes in hard-to-find components chips