IC Phoenix logo

Home ›  D  › D10 > DG407DY

DG407DY from NS,National Semiconductor

Fast Delivery, Competitive Price @IC-phoenix

If you need more electronic components or better pricing, we welcome any inquiry.

DG407DY

Manufacturer: NS, HARRIS, HAR

Single 16-Channel/Differential 8-Channel / CMOS Analog Multiplexers

Partnumber Manufacturer Quantity Availability
DG407DY NS, HARRIS, HAR 284 In Stock

Description and Introduction

Single 16-Channel/Differential 8-Channel / CMOS Analog Multiplexers The part DG407DY is a quad SPST (Single-Pole Single-Throw) analog switch manufactured by Vishay Siliconix. Here are its key specifications:

1. **Configuration**: Quad SPST (4 independent switches).
2. **Voltage Range**: 
   - Single Supply: +4.5V to +34V.
   - Dual Supply: ±4.5V to ±20V.
3. **On-Resistance (Ron)**: Typically 85Ω at ±15V supply.
4. **Charge Injection**: 10pC (typical).
5. **Switching Time**:
   - Turn-On Time (tON): 150ns (typical).
   - Turn-Off Time (tOFF): 100ns (typical).
6. **Leakage Current**: 100pA (maximum) at 25°C.
7. **Operating Temperature Range**: -40°C to +85°C.
8. **Package**: 16-pin SOIC (Small Outline Integrated Circuit).
9. **Applications**: Signal routing, data acquisition, audio switching, and communication systems.

For exact details, always refer to the official datasheet from Vishay Siliconix.

Application Scenarios & Design Considerations

Single 16-Channel/Differential 8-Channel / CMOS Analog Multiplexers# DG407DY Technical Documentation

## 1. Application Scenarios

### Typical Use Cases
The DG407DY is a monolithic CMOS analog multiplexer featuring four independently selectable channels. Its primary applications include:

 Signal Routing Systems 
-  Data Acquisition Systems : Routes multiple analog sensor signals to a single ADC input
-  Automated Test Equipment : Enables switching between multiple test points and measurement instruments
-  Communication Systems : Provides signal path selection in RF and baseband circuits

 Industrial Control Applications 
-  Process Control : Selects between multiple process variable inputs (temperature, pressure, flow)
-  Monitoring Systems : Alternates between different monitoring channels for periodic sampling
-  Safety Systems : Implements redundant signal path selection for critical measurements

### Industry Applications
-  Medical Equipment : Patient monitoring systems, diagnostic equipment signal routing
-  Automotive Electronics : Sensor signal multiplexing in engine control units
-  Industrial Automation : PLC input selection, process control instrumentation
-  Telecommunications : Base station signal routing, test equipment channel selection
-  Consumer Electronics : Audio/video signal switching, battery monitoring systems

### Practical Advantages and Limitations

 Advantages: 
-  Low Power Consumption : Typical supply current of 0.1μA (enabled), 1nA (disabled)
-  High Reliability : 2000V ESD protection per MIL-STD-883 Method 3015
-  Fast Switching : Turn-on time of 175ns maximum
-  Break-Before-Make Switching : Prevents signal shorting during channel transitions
-  Wide Voltage Range : Operates from ±4.5V to ±20V dual supplies or +9V to +40V single supply

 Limitations: 
-  On-Resistance Variation : 85Ω typical on-resistance with ±15Ω variation across channels
-  Charge Injection : 10pC typical, which may affect precision sampling circuits
-  Bandwidth Limitations : -3dB bandwidth of 200MHz may not suit high-frequency RF applications
-  Temperature Dependence : On-resistance increases by approximately 0.5%/°C

## 2. Design Considerations

### Common Design Pitfalls and Solutions

 Power Supply Sequencing 
-  Pitfall : Applying analog signals before power supplies can cause latch-up
-  Solution : Implement power supply sequencing or use supply monitoring circuits

 Signal Level Management 
-  Pitfall : Exceeding maximum signal range (VSS to VDD) can damage internal protection diodes
-  Solution : Add series resistors or clamping diodes for overvoltage protection

 Charge Injection Effects 
-  Pitfall : Switching transients corrupting sensitive analog signals
-  Solution : Use low-pass filtering on output or implement dummy switching cycles

### Compatibility Issues with Other Components

 ADC Interface Considerations 
-  Issue : Multiplexer on-resistance and settling time affecting ADC accuracy
-  Resolution : Select ADC with high input impedance or use buffer amplifiers

 Digital Control Interface 
-  Issue : CMOS logic levels may not be compatible with all microcontrollers
-  Resolution : Use level shifters or ensure proper VDD/VSS supply ratios

 Mixed-Signal Systems 
-  Issue : Digital switching noise coupling into analog signals
-  Resolution : Implement proper grounding and decoupling strategies

### PCB Layout Recommendations

 Power Supply Decoupling 
- Place 0.1μF ceramic capacitors within 5mm of VDD and VSS pins
- Use 10μF tantalum capacitors for bulk decoupling near power entry points

 Signal Routing 
- Keep analog signal traces short and away from digital control lines
- Use ground planes to shield sensitive analog signals
- Match trace lengths for multi-channel applications requiring phase matching

 Thermal Management 
- Provide adequate copper area for heat dissipation in high-frequency switching applications
- Ensure proper ventilation if

Alternative Part Number

  • ADG407BNZ --: Pin-compatible CMOS analog multiplexer with similar on-resistance and supply range, widely available and a direct functional replacement.
  • MAX307CPI+ --: 8-channel CMOS analog multiplexer with comparable Ron and switching characteristics, suitable for the same signal-routing role.
  • CD74HC4067E --: 16-channel CMOS analog multiplexer that can cover the 8-channel function with spare channels, low cost and broad availability.
  • MAX358CPE --: 8-channel analog multiplexer with comparable on-resistance and switching characteristics, suitable functional replacement in most DG407 sockets.
  • HI-508A --: Harris/Intersil-family 8-channel CMOS analog multiplexer with similar architecture and supply range, usable as a drop-in style alternative.
  • MAX307CPI --: 8-channel CMOS multiplexer with comparable Ron and switching characteristics, suitable for signal routing in similar applications.
  • CD4051BE --: Low-cost 8-channel analog multiplexer/demultiplexer with broad supply range; functional alternative when slightly higher on-resistance is acceptable.

Request Quotation

For immediate assistance, call us at +86 533 2716050 or email [email protected]

Part Number Quantity Target Price($USD) Email Contact Person
We offer highly competitive channel pricing. Get in touch for details.

Specializes in hard-to-find components chips