IC Phoenix
 
Home ›  TT84 > TS3431-TS3431AIZ-TS3431BILT,1.24 Programmable Shunt Voltage Reference
TS3431-TS3431AIZ-TS3431BILT Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
TS3431N/a200avai1.24 Programmable Shunt Voltage Reference
TS3431AIZSTN/a185avai1.24 Programmable Shunt Voltage Reference
TS3431BILTSTN/a20136avai1.24 Programmable Shunt Voltage Reference


TS3431BILT ,1.24 Programmable Shunt Voltage ReferenceElectrical CharacteristicsFigure 1. Reference voltage vs. temperature Figure 4. Test circuit for V ..
TS3431CILT ,1.24V PROGRAMMABLE SHUNT VOLTAGE REFERENCEAbsolute maximum ratings (AMR)Symbol Parameter Value UnitV Cathode to anode voltage 25 VKAI Reverse ..
TS358CS , Dual Operating Amplifier
TS358CS , Dual Operating Amplifier
TS358CSRL , Single Supply Dual Operational Amplifiers
TS3702CD ,MICROPOWER DUAL CMOS VOLTAGE COMPARATORTS3702C,I,MMICROPOWER DUAL CMOS VOLTAGE COMPARATORS ■ PUSH-PULL CMOS OUTPUT (NO EXTER NAL PULL ..
U6805B-FP ,Hex driver IC with thermal monitoring.Characteristics  Input Clamping Current Capability of ±10 mA Integrated Protection Cells (EMC, ES ..
U6808B ,Fail-Safe ICBlock Diagram VSVSBandgapPower-onreferencereset2.44 V+RESET-Reset Resetdebounce delay+-RELAYUnder/ ..
U6808B ,Fail-Safe ICFeatures• Digital Self-supervising Watchdog with Hysteresis One 250-mA Output Driver for Relay En ..
U6812B ,Single-ended bus transceiver (ISO 9141) with triple bufferspecifications.The U6812B provides anideal grouping of SO-packaged low-power drivers, thus meeting ..
U6812B ,Single-ended bus transceiver (ISO 9141) with triple bufferapplications. The stan-dard K-line is ISO 9141 compatible for baud rates up to 250 kBaud.U6812BThe ..
U6813B ,Fail-Safe ICapplications (e.g., anti-lock systems)High-side and needs to be monitored permanently. Usually, thi ..


TS3431-TS3431AIZ-TS3431BILT
1.24 Programmable Shunt Voltage Reference
Adjustable output voltage: 1.24 to 24V Several precision @ 25°C±2%, ±1%, ±0.5% and ±0.25% Sink current capability: 0.4 to 100mA Industrial temperature range: -40 to +125°C Performances compatible with industry
standard TL431
Description

The TS3431 is a programmable shunt voltage
reference with guaranteed temperature stability
over the entire temperature range of operation
(-40 to +125°C). The output voltage may be set to
any value between 1.24V and 24V with an
external resistor bridge.
Available in SOT23-3 surface mount package, it
can be designed in applications where space
saving is a critical issue.
Applications
Computers Instrumentation Battery chargers Switch mode power supply Battery operated equipments
Pin Connections (top view)
Order Codes
TS3431

1.24V Programmable Shunt Voltage Reference
TS3431 Absolute Maximum Ratings Absolute Maximum Ratings
Table1. Key parameters and their absolute maximum ratings
Pd has been calculated with Tamb = 25°C and Tj = 150°C and Rthjc = 66°C/W, Rthja = 200°C/W for the TO92 package
Rthjc = 110°C/W, Rthja = 340°C/W for the SOT23-3L package
Table2. Operating Conditions
Electrical Characteristics TS3431 Electrical Characteristics

Table3. Tamb = 25°C (unless otherwise specified)
Note: Limits are 100% production tested at 25°C. Limits over temperature are guaranteed through correlation and by design.
TS3431 Electrical Characteristics
Figure 1. Reference voltage vs. temperature
Figure 2. Cathode voltage vs cathode current
Figure 3. Reference input current vs
temperature
Figure 4. Test circuit for VK = Vref
Figure 5. Minimum operating current vs
temperature
Figure 6. Dynamic impedance vs frequency
Electrical Characteristics TS3431
Figure 7. Off-State current vs temperature
Figure 8. Ratio of change in reference input
voltage to change in Vka voltage vs
temperature
Figure 9. Phase and gain vs frequency
Figure 10. Test circuit for off-state current
measurement
Figure 11. Test circuit for VK > VREF
Figure 12. Test circuit for phase and gain
measurement
TS3431 Electrical Characteristics
Figure 13. Pulse response at Ik=1mA
Figure 14. Pulse response at Ik = 10mA
Figure 15. Block diagram
Figure 16. Test circuit for pulse response at Ik
= 1mA
Figure 17. Test circuit for pulse response at Ik
= 10mA
Figure 18. Equivalent input noise vs
frequency
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED