THS4001CD ,270-MHz Voltage-Feedback Amplifiermaximum ratings over operating free-air temperature (unless otherwise noted)Supply voltage, V to V ..
THS4001ID ,270-MHz Voltage-Feedback AmplifierTHS4001270-MHz HIGH-SPEED AMPLIFIERSLOS206A– DECEMBER 1997 – REVISED MARCH 1999D PACKAGE* Very High ..
THS4011CD ,290-MHz Low-Distortion Voltage-Feedback AmplifierThese devices have limited built-in ESD protection. The leads should be shorted together or the dev ..
THS4011CDG4 ,290-MHz Low-Distortion Voltage-Feedback Amplifier 8-SOIC .(2) The D and DGN packages are available taped and reeled. Add an R suffix to the device type (i.e ..
THS4011CDGN ,290-MHz Low-Distortion Voltage-Feedback AmplifierFEATURESTHS4011 THS4012†2• High Speed D, DGN, OR JG PACKAGE D OR DGN PACKAGE(TOP VIEW) (TOP VIEW)– ..
THS4011CDGNR ,290-MHz Low-Distortion Voltage-Feedback AmplifierBLOCK DIAGRAMNull128IN− −6OUT3IN+ +Figure 1. THS4011 – Single ChannelVCC281IN− −11OUT31IN+ +62IN−−7 ..
TLC5903PZP ,LED Driver 100-HTQFP
TLC5904PZP ,LED Driverblock diagramShift Register and Data LatchOVMMCENAShift RegisterBCENAData LatchRSEL08DOUT<0:7>RSEL1 ..
TLC5905PAP ,LED Driver W/Shift Registers, Data Latch & Constant Current Circuitry TLC5905 LED DRIVER SLLS401 – NOVEMBER 1999* Drive Capability and Output Counts: * OVM (Output Volt ..
TLC59116IPWR ,16-Bit Fast-Mode Plus (FM+) I2C-Bus Constant-Current LED Sink Driver 28-TSSOP -40 to 85Features• 16 LED Drivers (Each Output Programmable at • Supports Hot InsertionOff, On, Programmable ..
TLC5911PZP ,LED Driver W/Shift Registers, Data Latch, On-Chip PLL For Gray Scale Generation & Constant Currentblock diagramXOEBCENADCLK DOUT(9−0)DCLKDPOLXENABLE ControlXDPOUTDIN(9−0), 1 x 10 bit B.C.16 x 10 bi ..
TLC5916IPW ,8-Bit Constant-Current LED Sink Driver 16-TSSOP -40 to 125Block Diagram... 143 Description....... 19.3 Feature Description.... 144 Revision History........ 2 ..
THS4001CD-THS4001ID
270-MHz Voltage-Feedback Amplifier
Excellent Video Performance– 60 MHz Bandwidth (0.1 dB, G = 1)
– 0.04% Differential Gain
– 0.15° Differential Phase Very Low Distortion
– THD = –72 dBc at f = 1 MHz Wide Range of Power Supplies
VCC = ± 2.5 V to ± 15 V,
ICC = 7.5 mA Evaluation Module Available
descriptionThe THS4001 is a very high-performance,
voltage-feedback operational amplifier especially
suited for a wide range of video applications. The
device is specified to operate over a wide range of
supply voltages from ± 15 V to ± 2.5 V. With a
bandwidth of 270 MHz, a slew rate of over
400 V/μs, and settling times of less than 30 ns, the
THS4001 offers the unique combination of high
performance in an easy to use voltage feedback
configuration over a wide range of power supply
voltages.
The THS4001 is stable at all gains for both
inverting and noninverting configurations. It has a
high output drive capability of 100 mA and draws
only 7.5 mA of quiescent current. Excellent professional video results can be obtained with the differential
gain/phase performance of 0.04%/0.15° and 0.1 dB gain flatness to 60 MHz. For applications requiring low
distortion, the THS4001 is ideally suited with total harmonic distortion of –72 dBc at f = 1 MHz.
HIGH-SPEED AMPLIFIER FAMILYPlease be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
IN+
VCC–
OUT
NC – No internal connection
CLOSED-LOOP GAIN
FREQUENCY
–14 100M
f – Frequency – Hz
10M 1G 3G
300k
Closed-Loop Gain – dB
