IC Phoenix
 
Home ›  TT2 > TA1297AFN,RF MODULATOR FOR VCR
TA1297AFN Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
TA1297AFNTOSHIBAN/a200avaiRF MODULATOR FOR VCR
TA1297AFNTOSN/a902avaiRF MODULATOR FOR VCR
TA1297AFNTOSHIBA ?N/a1995avaiRF MODULATOR FOR VCR


TA1297AFN ,RF MODULATOR FOR VCRTA1297AFNTA17Q7AFNRF MODULATOR FOR VCRThe TA1297AFN is a PLL RF modulator for the UHF frequency ra ..
TA1297AFN ,RF MODULATOR FOR VCRFEATURES\J ll a Phase locked loop frequency synthesizer for RF carrier and I Wsound subcarriero Pr ..
TA1297AFN ,RF MODULATOR FOR VCRapplications (computer, personal equipment, office equipment, measuring equipment, industrial robo ..
TA1298AN ,PAL/NTSC VIDEO CHROMA AND DEFLECTION IC FOR CTV (NORMAL SCAN/DOUBLE SCAN MODE)
TA1303AFN ,MIXER / OSCILLATOR BUILT-IN FREQUENCY SYNTHESIZER FOR VHF, CATV AND UHF BAND.FEATURES  MIX · OSC block  VHF · CATV bands: Mixer and Oscillator  UHF bands: Mixer and Oscil ..
TA1303AFN ,MIXER / OSCILLATOR BUILT-IN FREQUENCY SYNTHESIZER FOR VHF, CATV AND UHF BAND.TA1303AFN TOSHIBA BIPOLAR LINEAR INTEGRATED CIRCUIT TENTATIVE SILICON MONOLITHIC TA1303AFN MIXER ..
TC4051BFN ,SINGLE 8-CHANNEL MULTIPLEXER/DEMULTIPLEXERTO S H I BA TC4051 B P/B F/B FN/B FT,TC4052B P/B F/B FN/B FT,TC4053B P/B F/B FN/B FTTC4051BP, TC405 ..
TC4051BFN ,SINGLE 8-CHANNEL MULTIPLEXER/DEMULTIPLEXERTO S H I BA TC4051 B P/B F/B FN/B FT,TC4052B P/B F/B FN/B FT,TC4053B P/B F/B FN/B FTTC4051BP, TC405 ..
TC4051BFT ,SINGLE 8-CHANNEL MULTIPLEXER/DEMULTIPLEXERTO S H I BA TC4051 B P/B F/B FN/B FT,TC4052B P/B F/B FN/B FT,TC4053B P/B F/B FN/B FTTC4051BP, TC405 ..
TC4051BP ,SINGLE 8-CHANNEL MULTIPLEXER/DEMULTIPLEXERTO S H I BA TC4051 B P/B F/B FN/B FT,TC4052B P/B F/B FN/B FT,TC4053B P/B F/B FN/B FTTC4051BP, TC405 ..
TC4052 ,SINGLE 8-CHANNEL MULTIPLEXER/DEMULTIPLEXERTC4051BP, TC4051BF, TC4051BFN, TC4051BFTTC4052BP, TC4052BF, TC4052BFN, TC4052BFTTC4053BP, TC4053BF, ..
TC4052 ,SINGLE 8-CHANNEL MULTIPLEXER/DEMULTIPLEXERapplications of our products. No responsibility is assumed by TOSHIBA CORPORATIONfor any infringeme ..


TA1297AFN
RF MODULATOR FOR VCR
TOSHIBA TA1297AFN
TOSHIBA BIPOLAR LINEAR INTEGRATED CIRCUIT SILICON MONOLITHIC
TA1l297AFN
RF MODULATOR FOR VCR
FEATURES
The TA1297AFN is a PLL RF modulator for the UHF
frequency range. The multi system can easily make the
lineup development.
Phase locked loop frequency synthesizer for RF carrier and
sound subcarrier
Programmable of no adjustment sound subcarriers
(4.5 MHz, 5.5 MHz, 6.0 MHz, 6.5 MHz)
SSOP24-P-300-0.65A
Possible to use for L-SECAM Weight : 0.14g (Typ.)
Programmable picture to sound ratio
Bus controlled Test pattern Signal Generator
Bus controlled one logic output port
Bus controlled power save mode
Controlled by " bus (Conforms to a fast-mode)
The sound S/N ratio is improved from TA1243CFN
000707EBA1
OTOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress.
It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in
making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA
products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set
forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set
forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc..
OThe TOSHIBA products listed in this document are intended for usage in general electronics applications (computer,
personal equi ment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These
TOSHIBA pro ucts are neither intended nor warranted for usage in equipment that requires extraordinarily high
quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury
("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments,
transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of
t2,ty,i,1e.vices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's
own ris .
OThe products described in this document are subject to the foreign exchange and foreign trade laws.
OThe information contained herein is presented only as a guide for the applications of our products. No responsibility
is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third
parties which may result from its use. No license is granted by implication or otherwise under any intellectual
property or other rights of TOSHIBA CORPORATION or others.
OThe information contained herein is subject to change without notice.
2001-02-22 1/19
TOSHIBA
BLOCK DIAGRAM
TA1297AFN
SOUND VCO SOUND SOUNDMODULATION
BY-PASS VT DEPTH LOG RF RF RF RF ANALOG RF VT
CONDENSER OUTPUT INPUT ADJ GND1 OSC1 OSC2 OSC3 OSC4 GND2 RF NF OUTPUT
A7h A A,Ch cs f..,% ATh Ach A Cts, A A ATh
WY 23 12.Y Ity I?g 19 18 17 16 's1.9' 14 13
l A. GND1 A. GND2
L - n . CP &
CP. SECAM l RF Carrier Driver
MOD ADJ. l OSC 1
l Phase
Phase TSG l Comp.
Comp. l 1
L I 1/4 Programmble
Sound Video Divider
Counter - Mod.
I a RF Mixer
White AM l
Clip Mod.
I 2 Buf.
X't I l C
Clamp - Sound a Amp.
vco OSC BUS
D. Vcc A. Vcc D. GND i i J,
C?s r\ PCN A " r\
IL) \E/ 12) Ib' IIS.,) 'di.; \D It.,) 12) Q9 \“J Q9
DIGITAL VIDEO PAL/NTSC SECAM ANALOG 4MHz DIGITAL SCL SDA 33V RF LOGIC
VCC SIGNAL SOUND SOUND vcc X'tal GND Vcc SIGNAL OUTPUT
INPUT SIGNAL SIGNAL OUTPUT
INPUT INPUT
2001-02-22 2/19
TOSHIBA TA1297AFN
TERMINAL CHARACTERISTICS (Vcc1 = 5.0V, VCC2 = 33V, Ta = 25°C)
PIN TYP. DC TYP. AC
No. FUNCTION VOLTAGE VOLTAGE INTERFACE NOTE
1 Digital (5.0V) - - -
- A. VCC
Video 7: :K
. 2.4V Sync TIP
2 Signal (Sync TIP) 0.5Vp-p Ci) clamp input
Input 7: o
A. GND
Switch terminal of
PAL/NTSC A-Vcc normal mode and
Sound .0 test mode.
3 . OV 200 ml/p-p L : Normal mode
Signal .
In ut (The voltage IS
p A. GND under 2 V.)
H : Test mode
SECAM A. VCC
4 Signal OV 200 mvp_p
Input A, GND
5 Analog (5.0V) - - Analog power
VCC supply
D. Vcc
Switch terminal of
3.6V internal oscillation
6 4MHz X'tal 2.7V - and external input
(Refer to page 9)
D. GND
Digital . .
7 GND (0 V) - - Digital ground
D. VCC
8 SCL OPEN BASE 51/p-p Ci? 1m IZC BUS serial clock
D. Vcc
9 SDA OPEN BASE 51/p-p 9 PC BUS serial data
D. GND
10 VCC33 (33V) - - Tuning voltage
power supply
2001-02-22 3/19
TOSHIBA TA1297AFN
PIN TYP. DC TYP. AC
No. FUNCTION VOLTAGE VOLTAGE INTERFACE NOTE
A. Vcc
RF Signal 80 dB/A/
Output 3 8 V (Picture) c C)
A. GND N
A. Vcc
12 Logic H : 4.3V BUS control
Output L 0 V - Imax =10 mA
A. GND
VCC33 a
RF VT Tuning voltage
13 - -
Output (i Cla? output
D. GND
D. Vcc
ar 2000
14 RF NF - - C? fl 1000
D. GND
15 Analog (0 V) Analo round
GND2 g g
16 RF OSC4 3.4V I ‘1 I A. VCC
17 RF OSC3 3.4V Gr"
- I Mv'.
18 RF OSC? 3.4V Ciii 'Ci) ®
19 RF osc1 3.4V A. GND
Analog
20 GND1 (0 V) - - Analog ground
2001-02-22 4/19
TOSHIBA TA1297AFN
PIN TYP. DC TYP. AC
No. FUNCTION VOLTAGE VOLTAGE INTERFACE NOTE
Possible to
adjustment by the
outside resistance.
A V Resistance is
SECAM . CC inserted between
Video VCC and 21 pin :
21 Modulation 3.1 V - Modulation depth
depth decreases
Adj. Resistance is
A, GND inserted between
GND and 21pin :
Modulation depth
increases
22 Sound VT - - 2kQ
A. GND
S d VT s
23 Output - - E
D. GND
Ir 33 0
Sound VCO 6 n
24 by-pass - - (i? '" _
condenser
1: O O
A. GND
2001-02-22 5/19
TOSHIBA TA1297AFN
IZC-BUS DATA FORMAT
MSB LSB ACK
Address Byte ADR 1 1 0 0 1 0 1 0 ACK
Control Byte1 C1 1 (*) (*) (*) PS2 PS1 PSO LE ACK
Control Byte2 C2 W0 PSA LO FA1 FAO (*) (*) (*) ACK
Prog. Data Byte1 PDI 0 TSG N10 N9 N8 N7 N6 N5 ACK
Prog. Data Byte2 PD2 N4 N3 N2 N1 0 1 0 0 ACK
(*) : Don't care
Bus data transmission
:ADR+C1+C2+PD1+PD2 or
ADR + PD1+ PD2 + C1+C2 or
ADR + C1+C2
ADR + PD1 + PD2
1. PS2-PSO : Picture to sound ratio setting
(Video signal input : Stair case (B/W) 0.5 Vp-p
Sound signal input : 1 kHz sin wave 0.2 I/p-p)
PS RATIO J") ERéATli-(IDAN PS2 PSI PSO
(SYSTEM L) SYSTEM L)
-6di? - 10 dB 0 0 0
-7dB - 11 dB 0 0 1
-8dB - 12 dB 0 1 0
-9di? - 13 dB 0 1 1
- 10 dB - 14 dB 1 0 0
- 11 dB - 15 dB 1 0 1
- 12 dB - 16 dB 1 1 0
- 13 dB - 17 dB 1 1 1
2. LE : System L enable
1 ... This mode is SYSTEM L. Positive modulation for video and AM modulation for sound
inter carrier at 6.5 MHz.
In this case, FA1 and FA2 don't care.
0 ... Modes other than SYSTEM L. Negative modulation for video and FM modulation for
sound inter carrier at 4.5 MHz, 5.5 MHz, 6.0 MHz, 6.5 MHz.
The system is selected by FA1 and FA2.
3. W0 : Control of white clip
1 ... White clip off. The system L is used, and the characteristic of 100% modulations can be
evaluated.
0 ... White clip on.
2001-02-22 6/19
TOSHIBA TA1297AFN
4. PSA : Control of power save
1 ... Power save off. (normal operation)
0 ... Power save on. Becomes waiting for the bus data.
And power supplies other than the bus decoder are turned off.
The data of the decoder is maintained while VCC is added.
When VCC is turned off, power on reset changes the data of the decoder by turning on VCC again.
5. LO : Control of logic out
1 ... 12 pin become high voltage.
0 ... 12 pin become low voltage.
6. FAI--FAO : Sound Inter Carrier Frequencies setting
FA1 FAO SOUND INTER CARRIER FREQUENCY
FREQUENCY DEVIATION
0 0 4.5 MHz , 25 kHz
0 1 5.5 MHz i 50 kHz
1 0 6.0 MHz i 50 kHz
1 1 6.5 MHz i 50 kHz
7. TPSG : Control of test pattern signal generator
1 ... ON
0 ... OFF (normal operation)
8. NIO-NI : Programmable Divider Data setting
The frequency of VCO is calculated by the next expression.
fVCO= 31.25kHzx32xN+250kHz
N = 512xN10+256xN9+128xN8+64xN7+32xN6+16xN5+8xN4+4xN3
+2xN2+N1
The frequency step is 1 MHz, and 250 kHz is given in the IC.
The divider data N is made frequency -250 kHz of the set channel.
2001-02-22 7/19
TOSHIBA
TA1297AFN
POWER ON RESET MODE
Power on reset functions when the power supply is turned on.
The decoder data is the data of power on reset until the bus data is received.
In this mode, because the power saving is turned on, the RF signal is not output.
0 VCO Frequency Setting : 591.25 MHz (CCIR 36 ch)
0 Television System
0 TPSG
: System G (Sound carrier frequency : 5.5 MHz,
FM deviation : :50 kHz,
Video modulation polarity : negative modulation)
o P/S Ratio Set Up : -13dB
It White Clip : ON
It Power Save : ON
0 Logic Output : LOW
.' OFF
MSB LSB ACK
Address Byte ADR 1 1 0 0 1 0 1 0 ACK
Control Byte1 C1 1 (*) (*) (*) 0 1 1 0 ACK
Control Byte2 C2 0 0 0 0 1 (*) (*) (*) ACK
Prog. Data Byte1 PD1 0 0 1 0 O 1 0 0 ACK
Prog. Data Byte2 PD2 1 1 1 1 0 1 0 0 ACK
(*) : Don't care
2001-02-22 8/19
TOSHIBA
EXTERNAL 4MHz INPUT MODE
TA1297AFN
It is possible to change to external 4MHz input mode by connecting resistance (R1) between
terminal 6 and 5V VCC-
Inside of IC
R1 (32
3.4V (TYP.)
1000 pF
" fps 2h?
4 MHz u . 'dy n.
.21; E
3.6 V (TYP.)
Condition of external 4MHz input mode : In terminal 6, the voltage is above 3.8 V, the amplitude
of 4MHz signal is above 100 ml/p-p (sine wave).
Please design R1, and an external circuit to suit the condition.
MAXIMUM RATINGS (Ta = 25°C)
CHARACTERISTIC SYMBOL RATING UNIT
Supply Voltage 5V System Vcc1 8 V
Supply Voltage 33V System VCC2 35 V
Power Dissipation (Note) PD 850 mW
Input Terminal Voltage VIN GND - 0.3--Vcc + 0.3 V
Operating Temperature Top, -20--75 "C
Storage Temperature Tstg - 55--150 °C
(Note) : Derated linearly above Ta = 25°C in the proportion of 6.8 mW/°C.
Please note the product design of the board because the calorific value is large.
It The copper area is widened.
0 Hole for heat radiation of shield case.
0 Other enough consideration.
RECOMMENDED OPERATING CONDITION
CHARACTERISTIC SYMBOL MIN. TYP. MAX. UNIT
Supply Voltage 5V System VCC1 4.5 5 5.5 V
Supply Voltage 33V System VCC2 27 33 35 V
2001-02-22 9/19
TOSHIBA
TA1297AFN
ELECTRICAL CHARACTERISTICS (VCC1 = 5.0V, VCC2 = 33V, Ta = 25°C, fp = 591.25 MHz)
No. CHARACTERISTIC SYMBOL CIR- MIN. TYP. MAX. UNIT NOTE
l-l Supply Current 1 lccl - 41 58 66 mA Power supply of 5V
(AA/CC + D.Vcc) part
J.? 1-2 Supply Current 2 Icc2 - 4 6 8 mA 5V power supply of
g (A.Vcc + D.VCC) power save
iit - Supply Current 3 - Power supply of
1 3 (Vcc 33 V) lcc3 1.4 2.2 3.0 mA 33V part
1-4 Operating Frequency fop - 471.25 - 855.25 MHz fp frequency
Video RF (Negative
2-1-1 ft(,te'iut Modulation) Vonifp) i,'heRtr"s1n;tsirv)
. - 77 80 83 ngV .
Video RF (Positive signal
2-1-2 Output Modulation) Vop(fp) : 0.5 Vp-p input
Video .
2-2-1 modulation (Negatlvg mpn - 75 79 83
Modulation) .
Depth 0/ WHITE signal
Video (Positive o : 0.5 vp_p input
2-2-2 modulation . mpp - 85 89 93
Modulation)
tt White
tO . . (Negative WHITE signal
ct. - - -
o 2 3 1 Clipping Modulation) mpn (MAX) 90 94 98 : 1.0 Vp-p input
cu Level
G? White %
. . (Positive DG/DP : 5%/5°,
2-3-2 Clipping Modulation) mpp(MAX) - 210 230 - WHITE CLIP : OFF
Differential (Negative
.4.1 D
2 Gain Modulation) Gn STAIR CASE
- - i3 i5 % (chrominance signal
20 IRE)
Differential (Positive
2-4-2 Gain Modulation) DGp
2001-02-22 10/19
TOSHIBA TA1297AFN
No. CHARACTERISTIC SYMBOL CIR- MIN. TYP. MAX. UNIT NOTE
2-5-l Differential Petirt DPn STAIR CASE
Phase Modulation) ' 0 5 V
- - -+3 :5 © . . pip .
2-5-2 Differential (Positive DP (Chrominance signal
Phase Modulation) p 20 IRE)
2-6-1 Vldleo S/N (Negarlvg mpn (S/N) 0.1--5 MHz,
Ratio Modu ation) Unweighting,
- 51 53 - dB 0 . I
2-6-2 Video S/N (Positive m (S/N) WHITE 50% Slgna
Ratio Modulation) pp input
Video (Negative
2-7-1 Frequency . fpn
Modulation)
Response 0.1--5 MHz 1 MHz
. - - i 1 i 2 dB
Video . . Reference
2-7-2 Fre uenc (Positive f
q y Modulation) pp
Response
Average Picture Level APL 10-90%, 50%
- - - + + o
2 8 Drift mp (APL) LFO.5 LF3.0 A Reference
{1 - (l/sync/N/white)
- h L I A - - 1 o
g 2 9 Sync Crus eve sync 3 A) x (100/40)1
O Chroma (Negative 4.43 MHz sin wave
IV - - . - - -7 -7
TE 2 10 1 Beat Modulation) I/cn 5 0 : 0.5 Vp-p input,
dB Video carrier level
Chroma (Positive reference,
- - - - -65 -60
2-10 2 Beat Modulation) l/cp P/S = -13di?
2-11-1 RF Carnfer 2 nd szp - - -26 -20
Harmonic Level dB Reference =
2-11-2 RF carri.er 3 rd V3fp - - -20 -12 Video carrler level
Harmonic Level
1 MHz sin wave
: 0.5 Vp-p input,
Video Signal 2nd fp + 1 MHz
- - - - - B
2 12 Harmonic Level VpH 55 50 d Reference,
fp + 2 MHz
measurement
2-13-1 ['resc.aller (fpx1/2) VPR1/2 - - o 10
Spurious
Prescaller dB/A/
- - v - - 1 2 -
2 13 2 Spurious (fpx3/2) pR3/2 0 0
2-14-1 Video Carrier Frequency Afp - - - A100 kHz X'tal series capacitor
Accuracy
TOSHIBA TA1297AFN
No. CHARACTERISTIC SYMBOL CIR- MIN. TYP. MAX. UNIT NOTE
TPSG (Ne ative
3-1-1 Modulation g . mpn (TPSG) 64 74 84
Modulation)
Depth 1y
TPSG (Positive 0
3-1-2 Modulation Modulation) mpp(TPSG) 82 92 97
e Depth
g! 3-2 TPSG V/S Ratio V/S 2.0 2.4 2.8 -
R 3-3-1 TPSG Horizontal Sync Tsync - 62 64 66 TPSG mode
, Signal Cycle
TPSG Horizontal Sync
3-3-2 Signal Width Wsync 3.6 4.0 4.4 S
- ' . '
3-4-1 TPSG SYNC 1'st Signal W1 22 24 26
3-4-2 T1356 SYNC-2 nd Signal W2 38 40 42
Set in -13dB by bus,
4-1-1 P/S Ratio FM Rp/S FM - -15 -13 -11 STAIR CASE (B/W)
signal
dB : 0.5Vp-p input, 1kHz
4-1-2 P/S Ratio AM Rp/S AM - -11 -9 -7 sin wave input
: 0.2 Vp-p (AM)
Range of P/S ratio can be
4-2-1 . AR - - 17 - - 10
P/S Ratio P/SFM adjusted by 1dB.
tt Range of dB 1 kHz sin wave input
(U - - - - - -
t 4 2 2 P/S Ratio ARP/SAM 13 6 : 0.2 I/p-p (AM)
D Sound
m 4-3-1 Modulation (5.5MHz/ [3pm - 0.558 0.62 0.682 kHz/ .
. . . 6.0 MHz/ mV 1kHz sm wave
Sensitivity .
6.5 MHz) : 0.2 Vp-p input,
Sound /3FM
4-3-2 Modulation FM2 0’sz - 0.279 0.31 0.341 kHz/ - elf (kHz)/200 (mV)
. . . (4.5 MHz) mV
Sensitivity
Sound 1 kHz sin wave
4-3-3 Modulation AM [3AM - 63.9 71.0 78.1 % .
. . . : 0.2 Vp-p input
Sensitivity
TOSHIBA TA1297AFN
No. CHARACTERISTIC SYMBOL CIR- MIN. TYP. MAX. UNIT NOTE
1kHz sin wave input
FM1 : -+50 kHz dev.= OdB
(5.5 MHz/ Inter Carrier
4-4-1 32:? SIN 6.0 MHz/ S/N(FM1) - 54 59 - demod.,
6.5 MHz) de-emph = IN,
Colorbar signal
: 0.5 Vp-p input
1 kHz sin wave input
: LF25 kHz dev.= OdB
dB Inter Carrier
4-4-2 P/nd S/ S/N(FM2) - 50 55 - demod.,
Ratio (4.5 MHz)
de-emph = IN,
Colorbar signal
: 0.5 Vp-p input
1 kHz sin wave input
g : 60% mod.= OdB
a. Sound S/N de-emph = IN,
4-4- N AM - -
g 3 Ratio AM S/ ( ) 50 55 Colorbar signal
JR : 0.5 Vp-p input
Sound 1 kHz sin wave
4-5-1 Distortion FM THD(FM) - : -+50 (25) kHz dev.
Sound - 0.25 0.5 % 1kHz sin wave
4-5-2 Distortion AM THD(AM) - : 60% MOD.
4-6-1 Frequency FM fS(FM) - - i1 :2
Response dB 100 Hz--20 kHz,
Sound 1 kHz reference
4-6-2 Frequency AM fS(AM) - - $0.5 :1
Response
Sound 2'nd Harmonic
4-7-1 Level VSH1 - - -65 -60 P/S ratio = -13dB,
' . dB Video carrier level
Sound 3 rd Harmonic
4-7-2 VSH2 - - - 70 - 65 reference
4-8 Sound Inter-Carrier nfs - - - i750 Hz X'tal series capacitor
Frequency Accuracy
TOSHIBA TA1297AFN
No. CHARACTERISTIC SYMBOL ESE: MIN. TYP. MAX. UNIT NOTE
Input LOW Voltage of
5-1 both SDA and SCL VL - 0 - 1.8
Input HIGH Voltage of V
5-2 both SDA and SCL VH - 2.8 - VCC
Isync = 3 mA,
Maximum Output LOW During the
5-3 Voltage of SDA Line VACK - - - 0.4 V acknowledge clock
Threshold Volta e of
a 5-4 Power on Resetg VRESET - 2.0 2.8 3.6 v
ld Voltage of terminal
fl' Threshold Voltage of 6
5-5 External Reference VEXT - 3.4 3.6 3.8 V L : Internal
Signal Input Mode oscillation
H: External input
Voltage of terminal
Threshold Voltage of 3
5-6 Test mode VTEST - 2.0 3.5 4.5 V L : Normal mode
H: Test mode
Mounts on the
5-7 Logic Out Current 'LOGIC - - - 10 mA tlii1Cr,fat1f,n'"iv3t,r,,vv.
Ta (MAX) = 75°C
Negative Resistance of
6-1 X'tal Oscillator RXO - -1 - - kfl -
- Input Signal Level of External 4MHz
6-2 External Reference VEXREF - 100 - - mVp_p input mode,
Signal sine wave
2001-02-22 14/19
TOSHIBA TA1297AFN
INPUT WAVE FORM
WHITE SIGNAL STAIRCASE (B/W) SIGNAL
APL50% -
Lu Lu Lu
L- a: re
it 0 o
' - .-
-1, LlJ -r,
r- S E
> I 64 ,us l 64 As "
STAIRCASE SIGNAL (Sub-carrier 20 IRE)
APL50% l'
64 M; I
2001-02-22 15/19
1llllllll Illl IIIIII.
IIIIIIIIIIIIIIIII
.I lllllllllllll
tHD : STA
tHD : DAT
tSU : DAT tsu : STA
tsu : STO
IIIIIIIIIIIIIIIIIII
lllllllll
TIMING REQUIREMENTS FOR THE PC-BUS
CONDITION
CONDITION
ADDRESS
SCL' L/rl/l/C/rl/l/C/i) /7) M t: '
I nu...-
L__J l
DATA TRANSFER ON THE IZC-BUS
TOSHIBA
TA1297AFN
TOSHIBA
APPLICATION CIRCUIT
TA1297AFN
tl. tl..
LL U. P rs
1 1 <3 E E E 0- 3,1
Ps .- m _ O o "TS .
f f L _
1 v2 2 1 v2 2 0.01 prF
5V s, s 6 " s 6 F
u, m " 4 pF .. a 180 k9.
tt, so F-o
F I 2200 pF
ADS p'Ch r\
29 2 18 17 \19 \1; 14 13
A. GND2
' CP &
C.P RF Carrier Driver
Phase Comp.
Comp. I
l Programmble
1/4 _ _
Sound Divider
, Counter .
I "-o, RF Mixer
White AM l
Clip Mod.
. 2 Buf.
So d X't I I C
Clamp - un a B S Amp.
VCO OSC U
D. VCC A. Vcc l D. GND l
fi1 12 f?, G) f?, 6 C.) (e) Ci) 10 41R 42
+ a a sit'
+ t l 3 “l e
1 3 u. P + 4MHZ= I
2t, re u. ' .
ttt X'tal
C; Emph. I E T 1000 pF (*) L
5V I E 2
l I ai/ps
", O 0 33V 0
Video Sound 5V SCL SDA RF OUT Logic
IN IN OUT
(*) : Protection resistance for prevention of overshoot.
: Coil Diameter 3.2 mm, Wire Diameter 0.4mm, 2.5 turns, Aircoil.
: For frequency response correction.
TOSHIBA TA1297AFN
HANDLING PRECAUTIONS
l. The device should not be inserted into or removed from the test jig while the voltage is being
applied: otherwise the device may be degraded or break down.
Do not abruptly increase or decrease the power supply to the device either.
Overshoot or chattering of the power supply may cause the IC to be degraded.
To avoid this filters should be incorporated on the power supply line.
2. The application circuits described in this datasheet are given only as system examples for
evaluating the device's performance. Toshiba Intend neither to recommend the configuration or
related values of the peripheral circuits nor to manufacture such application system in large
quantities.
Please note that high-frequency characteristics of the device may vary depending on the external
components, mounting method and other factors relating to the application design.
Therefore, the characteristics of application circuits must be evaluated at the responsibility of the
users incorporating the device into their design.
Toshiba only guarantee the quality and characteristics of the device as described in this detasheet
and do not assume any responsibility for the customers application design.
3. In order to better understand the quality and reliability of Toshiba semiconductor products and
to incorporate them into design in an appropriate manner, please refer to the latest
Semiconductor Reliability Handbook (Integrated Circuit) published by Toshiba Semiconductor
Company.
The handbook can also be viewed online at
http://www.semicon.toshiba.co.jp/noseek/us/sinrai/sinraifm.htm
2001-02-22 18/19
TOSHIBA TA1297AFN
PACKAGE DIMENSIONS
SSOP24-P-300-0.65A Unit : mm
RflRRRilRRRRRfl d Tr
ii,i)njii 'file/tii-s-c-i-,-.-,-----,-.-,-'',-
0.325TYP " o.22+0.1
=1 ll" o 0.13
8.3MAX "
= 73:02 =
$1 tiii:.', a“?
tht. " e?
I'-.? l l 0.45Hh2
Weight : 0.14g (Typ.)
2001-02-22 19/19
:
www.loq.com
.
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED