ML6426CS1 ,High Bandwidth Triple Video Filters with Buffered Outputs for RGB or YUVGeneral Description• 5V ±10% operation The ML6426 are a family of triple video filters with buffered ..
ML6426CS1 ,High Bandwidth Triple Video Filters with Buffered Outputs for RGB or YUV ML6426High Bandwidth Triple Video Filters with Buffered Outputs for RGB or YUV
ML6426CS1 ,High Bandwidth Triple Video Filters with Buffered Outputs for RGB or YUV ML6426High Bandwidth Triple Video Filters with Buffered Outputs for RGB or YUV
ML6426CS1 ,High Bandwidth Triple Video Filters with Buffered Outputs for RGB or YUVBlock Diagram12 4V VCCO CCR A/Y AIN IN2R /YOUT OUT4th-ORDER MUXR B/Y B×2 13IN INFILTER A5TRANSCONDU ..
ML6426CS-1 ,High Bandwidth Triple Video Filters with Buffered Outputs for RGB or YUVBLOCK DIAGRAM12 4V VCCO CCR A/Y AIN IN2R /YOUT OUT4th-ORDER MUXR B/Y B×2 13IN INFILTER A5TRANSCONDU ..
ML6426CS-1 ,High Bandwidth Triple Video Filters with Buffered Outputs for RGB or YUVML6426High Bandwidth Triple Video Filters with BufferedOutputs for RGB or YUV
MMBT4403LT3 ,Small SignalSwitch3MMBT4403LT1TRANSIENT CHARACTERISTICS25°C 100°C30 107.0V = 30 VCC5.020I /I = 10C BCeb3.02.0101.07.0 ..
MMBT4403T-7 , PNP SMALL SIGNAL SURFACE MOUNT TRANSISTOR
MMBT4403T-7-F , PNP SMALL SIGNAL SURFACE MOUNT TRANSISTOR
MMBT4403WT1G , Switching Transistor PNP Silicon
MMBT489LT1 ,30 VOLTS 2.0 AMPS NPN TRANSISTORELECTRICAL CHARACTERISTICS (T = 25°C unless otherwise noted)ACharacteristic Symbol Min Max UnitOFF ..
MMBT489LT1 ,30 VOLTS 2.0 AMPS NPN TRANSISTORTHERMAL CHARACTERISTICS2EMITTERCharacteristic Symbol Max UnitTotal Device Dissipation P (Note 1.) 3 ..
ML6426CS1-ML6426CS1_NL-ML6426CS15-ML6426CS2-ML6426CS3-ML6426CS4-ML6426CS4＿NL-ML6426CS5
High Bandwidth Triple Video Filters with Buffered Outputs for RGB or YUV
Features 5V ±10% operation RGB/YUV filters for ATSC Digital Television VESA
Standard 2:1 Mux Inputs for multiple RGB/YUV inputs Triple Reconstruction Filter options for 6.7, 12, 24, 30,
and 36MHz to handle various line rates Multiple ML6426 outputs can be paralleled to drive RGB/
YUV outputs at different frequencies for various line rates
by means of Disable/Enable pin. 6dB drivers and sync tip clamps for DC restore DC restore with minimal tilt 0.4% differential gain on all channels
0.4º differential phase on all channels
0.8% total harmonic distortion on all channels 2kV ESD protection
General DescriptionThe ML6426 are a family of triple video filters with buffered
outputs. There are several versions of the ML6426, each with
different passband cut-off frequencies of 6.7MHz, 12MHz,
24MHz, 30MHz, and 36MHz. Each channel contains a 4
order Butterworth lowpass reconstruction video filter. The
filter is optimized for minimum overshoot and flat group
delay and guaranteed differential gain and phase at the out-
puts of the integrated cable drivers.
All input signals from DACs are AC coupled into the
ML6426. All channels have DC restore circuitry to clamp the
DC input levels during video H-sync, using an output feed-
back clamp. An external H-sync signal is required for this
purpose.
All outputs must be AC coupled into their loads. Each output
can drive 2V
P-P
into a 150
load. All channels have a gain of
2 (6dB) at 1V
P-P
input levels.
