IC Phoenix
 
Home ›  MM125 > MC88LV915TFN,Low voltage low skew CMOS PLL clock driver
MC88LV915TFN Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
MC88LV915TFNMOTN/a247avaiLow voltage low skew CMOS PLL clock driver
MC88LV915TFNMOTOROLAN/a160avaiLow voltage low skew CMOS PLL clock driver


MC88LV915TFN ,Low voltage low skew CMOS PLL clock driverFeatures• Five Outputs (Q0–Q4) with Output–Output Skew < 500 ps each being phase and frequency loc ..
MC88LV915TFN ,Low voltage low skew CMOS PLL clock driver**SEMICONDUCTOR TECHNICAL DATA * ** ** The MC88LV915T Clock Driver utilizes phase–locked loop te ..
MC88LV926 ,LOW SKEW CMOS PLL 68060 CLOCK DRIVER
MC88LV926 ,LOW SKEW CMOS PLL 68060 CLOCK DRIVER
MC88LV926DW ,LOW SKEW CMOS PLL 68060 CLOCK DRIVERMAXIMUM RATINGS*Symbol Parameter Limits UnitV , AV DC Supply Voltage Referenced to GND –0.5 to 7.0 ..
MC88PL117 ,CMOS PLL CLOCK DRIVER**SEMICONDUCTOR TECHNICAL DATA ** ** ** * *#* * ** * **"% * * **$ $** **"!The MC88PL117 utilize ..
MF10ACN ,Universal Monolithic Dual Switched Capacitor FilterGeneral Descriptionworth, Bessel, Cauer and Chebyshev) can be formed.The MF10 consists of 2 indepen ..
MF10AJ ,Universal Monolithic Dual Switched Capacitor FilterMF10UniversalMonolithicDualSwitchedCapacitorFilterDecember1994MF10UniversalMonolithicDualSwitchedCa ..
MF10BN ,Kual Universal Switched Capacitor FilterELECTRICAL CHARACTERISTICS (Complete Filter) (Vs = t5V, TA = +25° C) “r, _ » _ _ -_7 PARAMET ..
MF10BWP ,Kual Universal Switched Capacitor FilterGeneral Description The MF10 is a dual 2nd order, switched capacitor, state variable filter, Ea ..
MF10CCJ ,Universal Monolithic Dual Switched Capacitor FilterFeaturestion;theremaining2outputpinsperformlowpassandband-YEasy to usepass functions. The center fr ..
MF10CCJ ,Universal Monolithic Dual Switched Capacitor FilterFeaturestion;theremaining2outputpinsperformlowpassandband-YEasy to usepass functions. The center fr ..


MC88LV915TFN
Low voltage low skew CMOS PLL clock driver
SEMICONDUCTOR TECHNICAL DATA - -
The MC88LV915T Clock Driver utilizes phase–locked loop technology
to lock its low skew outputs’ frequency and phase onto an input reference
clock. It is designed to provide clock distribution for high performance
PC’s and workstations.
The PLL allows the high current, low skew outputs to lock onto a single
clock input and distribute it with essentially zero delay to multiple
components on a board. The PLL also allows the MC88LV915T to
multiply a low frequency input clock and distribute it locally at a higher
(2X) system frequency. Multiple 88LV915’s can lock onto a single
reference clock, which is ideal for applications when a central system
clock must be distributed synchronously to multiple boards (see Figure 4
on Page 9).
Five “Q” outputs (Q0–Q4) are provided with less than 500 ps skew between their rising edges. The Q5 output is inverted (180°
phase shift) from the “Q” outputs. The 2X_Q output runs at twice the “Q” output frequency, while the Q/2 runs at 1/2 the “Q”
frequency.
The VCO is designed to run optimally between 20 MHz and the 2X_Q Fmax specification. The wiring diagrams in Figure 2 detail
the different feedback configurations which create specific input/output frequency relationships. Possible frequency ratios of the
“Q” outputs to the SYNC input are 2:1, 1:1, and 1:2.
The FREQ_SEL pin provides one bit programmable divide–by in the feedback path of the PLL. It selects between divide–by–1
and divide–by–2 of the VCO before its signal reaches the internal clock distribution section of the chip (see the block diagram on
page 2). In most applications FREQ_SEL should be held high (÷1). If a low frequency reference clock input is used, holding
FREQ_SEL low (÷2) will allow the VCO to run in its optimal range (>20MHz).
In normal phase–locked operation the PLL_EN pin is held high. Pulling the PLL_EN pin low disables the VCO and puts the
88LV915T in a static “test mode”. In this mode there is no frequency limitation on the input clock, which is necessary for a low
frequency board test environment. The second SYNC input can be used as a test clock input to further simplify board–level testing
(see detailed description on page 11).
Pulling the OE/RST pin low puts the clock outputs 2X_Q, Q0–Q4, Q5 and Q/2 into a high impedance state (3–state). After the
OE/RST pin goes back high Q0–Q4, Q5 and Q/2 will be reset in the low state, with 2X_Q being the inverse of the selected SYNC
input. Assuming PLL_EN is low, the outputs will remain reset until the 88LV915 sees a SYNC input pulse.
A lock indicator output (LOCK) will go high when the loop is in steady–state phase and frequency lock. The LOCK output will go
low if phase–lock is lost or when the PLL_EN pin is low. The LOCK output will go high no later than 10ms after the 88LV915 sees a
SYNC signal and full 5V VCC.
Features

• Five Outputs (Q0–Q4) with Output–Output Skew < 500 ps each being phase and frequency locked to the SYNC input
• The phase variation from part–to–part between the SYNC and FEEDBACK inputs is less than 550 ps (derived from the tPD
specification, which defines the part–to–part skew)
• Input/Output phase–locked frequency ratios of 1:2, 1:1, and 2:1 are available
• Input frequency range from 5MHz – 2X_Q FMAX spec.
• Additional outputs available at 2X and +2 the system “Q” frequency. Also a Q (180° phase shift) output available
• All outputs have ±36 mA drive (equal high and low) at CMOS levels, and can drive either CMOS or TTL inputs. All inputs
are TTL–level compatible. ±88mA IOL/IOH specifications guarantee 50Ω transmission line switching on the incident edge
• Test Mode pin (PLL_EN) provided for low frequency testing. Two selectable CLOCK inputs for test or redundancy purposes.
All outputs can go into high impedance (3–state) for board test purposes
• Lock Indicator (LOCK) accuracy indicates a phase–locked state
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED