IC Phoenix
 
Home ›  M > M83 > 15pcs of MAX9173EUE+,mfg:MAXIM,Quad LVDS Line Receiver with Flow-Through Pinout and "In-Path" Fail-Safe
MAX9173EUE+ from IC-PHOENIX Fast Delivery,Good Price
Part Number:
If you need more quantity or better price,Welcom Any inquiry.
We available via phone +865332796365 Email
MAX9173EUE+ from MAXIM, MAXIM - Dallas Semiconductor 15pcs , TSSOP16 , Alternate PN:MAX9173EUE,Quad LVDS Line Receiver with Flow-Through Pinout and "In-Path" Fail-Safe
Partno Mfg Dc Qty Available
MAX9173EUE+ MAXIM N/a 15
applications requiring♦ Fully Compatible with DS90LV048Ahigh data rates, low power, and low noise. The♦ Low 1.0mA (max) Disable Supply CurrentMAX9173 is guaranteed to receive data at speeds upto 500Mbps (250MHz) over controlled-impedance ♦ In-Path Fail-Safe Circuitrymedia of approximately 100Ω. The transmission media♦ Flow-Through Pinoutcan be printed circuit (PC) board traces or cables.Simplifies PC Board LayoutThe MAX9173 accepts four LVDS differential inputs and Reduces Crosstalktranslates them to LVCMOS/LVTTL outputs. The♦ Guaranteed 500Mbps Data RateMAX9173 inputs are high impedance and require an♦ 400ps Pulse Skew (max)external termination resistor when used in a point-to-point connection. ♦ Conforms to ANSI TIA/EIA-644 LVDS StandardThe device supports a wide common-mode input range ♦ High-Impedance LVDS Inputs when Powered-Offof 0.05V to V - 0.05V, allowing for ground potentialCC♦ Available in Tiny 3mm x 3mm QFN Packagedifferences and common-mode noise between the dri-ver and the receiver. A fail-safe feature sets the outputOrdering Informationhigh when the inputs are open, or when the inputs areundriven and shorted or undriven and parallel terminat-PART TEMP RANGE PIN-PACKAGEed. The EN and EN inputs control the high-impedanceMAX9173EUE -40°C to +85°C 16 TSSOPoutputs. The enables are common to all four receivers.Inputs conform to the ANSI TIA/EIA-644 LVDS stan-MAX9173ESE -40°C to +85°C 16 SOdard. The flow-through pinout simplifies board layoutMAX9173ETE* -40°C to +85°C 16 Thin QFN-EP**and reduces crosstalk by separating the LVDS inputs*Future product. Contact factory for availability.and LVCMOS/LVTTL outputs. The MAX9173 operates**EP = Exposed pad.from a single 3.3V supply, and is specified for opera-tion from -40°C to +85°C. Refer to the MAX9121/MAX9122 data sheet for lower jitter quad LVDSTypical Operating Circuitreceivers with parallel fail-safe. Refer to the MAX9123data sheet for a quad LVDS line driver with flow- LVDS SIGNALSthrough pinout.MAX9123 MAX9173The device is available in 16-pin TSSOP, SO, andspace-saving thin QFN packages.Tx 100Ω Rx

ic,good price


TEL:86-533-2796365      FAX:86-533-2716790
   

©2018 IC PHOENIX CO.,LIMITED