MAX9111ESA ,Single/Dual LVDS Line Receivers with Ultra-Low Pulse Skew in SOT23applications requiring minimum power Space-Saving 8-Pin SOT23 and SO Packagesconsumption, space, a ..
MAX9111ESA ,Single/Dual LVDS Line Receivers with Ultra-Low Pulse Skew in SOT23FeaturesThe MAX9111/MAX9113 single/dual low-voltage differen- Low 300ps (max) Pulse Skew for High- ..
MAX9111ESA+ ,Single/Dual LVDS Line Receivers with Ultra-Low Pulse Skew in SOT23FeaturesThe MAX9111/MAX9113 single/dual low-voltage differen-♦ Low 300ps (max) Pulse Skew for High- ..
MAX9112EKA+ ,Single/Dual LVDS Line Driver with Ultra-Low Differential Skew in SOT23ApplicationsTEMP. PIN- TOPPARTLaser Printers Network Switches/RoutersRANGE PACKAGE MARKDigital Copi ..
MAX9112EKA+T ,Single/Dual LVDS Line Driver with Ultra-Low Differential Skew in SOT23applications requiring minimum power con-♦ Space-Saving 8-Pin SOT23 and SO Packagessumption, space, ..
MAX9112EKA-T ,Single/Dual LVDS Line Drivers with Ultra-Low Pulse Skew in SOT23applications requiring minimum power con- Space-Saving 8-Pin SOT23 and SO Packagessumption, space, ..
MB88344 ,8-Bit D/A Converter with Operational Amplifier Output BuffersFUJITSU SEMICONDUCTORDS04-13505-3EDATA SHEETLINEAR IC8-Bit D/A Converter with Operational Amplifier ..
MB88344 ,8-Bit D/A Converter with Operational Amplifier Output BuffersFUJITSU SEMICONDUCTORDS04-13505-3EDATA SHEETLINEAR IC8-Bit D/A Converter with Operational Amplifier ..
MB88344 ,8-Bit D/A Converter with Operational Amplifier Output BuffersFUJITSU SEMICONDUCTORDS04-13505-3EDATA SHEETLINEAR IC8-Bit D/A Converter with Operational Amplifier ..
MB88345 ,D/A Converter for Digital Tuning (24-channel, 8-bit, on-chip OP amp)FUJITSU SEMICONDUCTORDS04-13508-2EDATA SHEETLinear IC ConverterCMOSD/A Converter for Digital Tuni ..
MB88345PF ,D/A Converter for Digital Tuning (24-channel, 8-bit, on-chip OP amp)FEATURES• Ultra-low power consumption (1.1 mW/ch : typical) • Compact space-saving package (QFP-32 ..
MB88346B ,R-2R TYPE 8-BIT D/A CONVERTER WITH OPERATIONAL AMPLIFIER OUTPUT BUFFERSFUJITSU SEMICONDUCTORDS04-13501-2EDATA SHEETLINEAR ICR-2R TYPE 8-BIT D/A CONVERTER WITHOPERATIONAL ..
MAX9111ESA-MAX9113EKA
Single/Dual LVDS Line Receivers with Ultra-Low Pulse Skew in SOT23
General DescriptionThe MAX9111/MAX9113 single/dual low-voltage differen-
tial signaling (LVDS) receivers are designed for high-
speed applications requiring minimum power
consumption, space, and noise. Both devices support
switching rates exceeding 500Mbps while operating from
a single +3.3V supply, and feature ultra-low 300ps (max)
pulse skew required for high-resolution imaging applica-
tions such as laser printers and digital copiers.
The MAX9111 is a single LVDS receiver, and the
MAX9113 is a dual LVDS receiver.
Both devices conform to the EIA/TIA-644 LVDS standard
and convert LVDS to LVTTL/CMOS-compatible outputs.
A fail-safe feature sets the outputs high when the inputs
are undriven and open, terminated, or shorted. The
MAX9111/MAX9113 are available in space-saving 8-pin
SOT23 and SO packages. Refer to the MAX9110/
MAX9112 data sheet for single/dual LVDS line drivers.
________________________Applications
FeaturesLow 300ps (max) Pulse Skew for High-Resolution
Imaging and High-Speed InterconnectSpace-Saving 8-Pin SOT23 and SO PackagesPin-Compatible Upgrades to DS90LV018A and
DS90LV028A (SO Packages Only)Guaranteed 500Mbps Data RateLow 29mW Power Dissipation at 3.3VConform to EIA/TIA-644 StandardSingle +3.3V SupplyFlow-Through Pinout Simplifies PC Board LayoutFail-Safe Circuit Sets Output High for Undriven
InputsHigh-Impedance LVDS Inputs when Powered Off
MAX9111/MAX9113
Single/Dual LVDS Line Receivers with
Ultra-Low Pulse Skew in SOT23
Pin Configurations/Functional Diagrams/Truth Table19-4802; Rev 0; 7/00
Ordering Information
Typical Operating Circuit appears at end of data sheet.
MAX9111/MAX9113
Single/Dual LVDS Line Receivers with
Ultra-Low Pulse Skew in SOT23
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS(VCC= +3.0V to +3.6V, magnitude of input voltage, |VID| = +0.1V to +1.0V, VCM= |VID|/2 to (2.4V - (|VID|/2)), TA= -40°C to +85°C.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
VCCto GND..............................................................-0.3V to +4V
IN_ _ to GND.........................................................-0.3V to +3.9V
OUT_ _ to GND...........................................-0.3V to (VCC+ 0.3V)
ESD Protection All Pins
(Human Body Model, IN_+, IN_-)..................................±11kV
Continuous Power Dissipation (TA= +70°C)
8-Pin SOT23 (derate 7.52mW/°C above +70°C)..........602mW
8-Pin SO (derate 5.88mW°C above +70°C).................471mW
Operating Temperature Ranges
MAX911_E.......................................................-40°C to +85°C
Storage Temperature Range.............................-65°C to +150°C
Lead Temperature (soldering, 10s).................................+300°C
MAX9111/MAX9113
Single/Dual LVDS Line Receivers with
Ultra-Low Pulse Skew in SOT23tested at= +25°C.
Note 2:Current into the device is defined as positive. Current out of the devices is defined as negative. All voltages are referenced
to ground except VTHand VTL.
Note 3:Guaranteed by design, not production tested.
Note 4:ACparameters are guaranteed by design and characterization.
Note 5:CLincludes probe and test jig capacitance.
Note 6:fMAXgenerator output conditions: tR= tF< 1ns (0% to 100%), 50% duty cycle, VOH= 1.3V, VOL= 1.1V.
Note 7:tSKD1is the magnitude difference of differential propagation delays in a channel. tSKD1= |tPLHD - tPHLD|.
Note 8:tSKD2is the magnitude difference of the tPLHDor tPHLDof one channel and the tPLHDor tPHLDof the other channel on the
same device.
Note 9:tSKD3is the magnitude difference of any differential propagation delays between devices at the same VCCand within 5°C
of each other.
Note 10:tSKD4, is the magnitude difference of any differential propagation delays between devices operating over the rated supply
and temperature ranges.
Test Circuit Diagrams
MAX9111/MAX9113
Single/Dual LVDS Line Receivers with
Ultra-Low Pulse Skew in SOT23Figure 1. Receiver Propagation Delay and Transition Time Test Circuit
Figure 2. Receiver Propagation Delay and Transition Time Waveforms
MAX9111/MAX9113
Single/Dual LVDS Line Receivers with
Ultra-Low Pulse Skew in SOT23
Typical Operating Characteristics(VCC= 3.3V, |VID| = 200mV, VCM= 1.2V, fIN= 200MHz, CL= 15pF, TA= +25°C and over recommended operating conditions unless
otherwise specified.)
MAX9111/MAX9113
Single/Dual LVDS Line Receivers with
Ultra-Low Pulse Skew in SOT23DIFFERENTIAL PROPAGATION DELAY
vs. DIFFERENTIAL INPUT VOLTAGE
MAX9111 toc11
DIFFERENTIAL INPUT VOLTAGE (mV)
DIFFERENTIAL PROPAGATION DELAY (ns)
MAX9111 toc10
TEMPERATURE (°C)
DIFFERENTIAL SKEW (ps)
DIFFERENTIAL PULSE SKEW
vs. TEMPERATUREDIFFERENTIAL PROPAGATION DELAY
vs. COMMON-MODE VOLTAGE
MAX91111 toc12
COMMON-MODE VOLTAGE (V)
DIFFERENTIAL PROPAGATION DELAY (ns)
MAX9111 toc14
TEMPERATURE (°C)
TRANSITION TIME (ps)
TRANSITION TIME vs. TEMPERATUREMAX9111 toc15
LOAD (pF)
DIFFERENTIAL PROPAGATION DELAY (ns)
DIFFERENTIAL PROPAGATION DELAY
vs. LOAD
Typical Operating Characteristics (continued)(VCC= 3.3V, |VID| = 200mV, VCM= 1.2V, fIN= 200MHz, CL= 15pF, TA= +25°C and over recommended operating conditions,
unless otherwise specified.)
