MAX7453CSA-MAX7453EVKIT+ Fast Delivery |IC PHOENIX CO.,LIMITED

MAX7453EVKIT+ ,Triple-Channel Video Reconstruction Filter and Buffer for Composite and Y/C Outputsapplications such as set-top boxes,Interlaced SDTV SignalsDVD players, hard-disk recorders (HDRs), ..
MAX7454UUP ,6 dB, HD/SD switchable video filter and bufferApplicationsTEMP BUFFERSet-Top BoxesPART PIN-PACKAGERANGE GAIN (dB)Direct-Broadcast Satellite (DBS) ..
MAX7456EUI+ ,Single-Channel Monochrome On-Screen Display with Integrated EEPROMApplicationsMAX7456EUI+ 28 TSSOP-EP*JapaneseIn-Cabin Entertainment*EP = Exposed pad.Consumer Electr ..
MAX7456EUI+T ,Single-Channel Monochrome On-Screen Display with Integrated EEPROMELECTRICAL CHARACTERISTICS(V = +4.75V to +5.25V, V = +4.75V to +5.25V, V = +4.75V to +5.25V, T = T ..
MAX745EAP ,Switch-Mode Lithium-Ion Battery-ChargerApplicationsrefer to the MAX1647 and MAX1648. For a low-costlithium-ion charger using a linear-regu ..
MAX745EAP ,Switch-Mode Lithium-Ion Battery-ChargerFeaturesThe MAX745 provides all functions necessary for' Charges 1 to 4 Lithium-Ion Battery Cellsch ..
MB6M ,MINIATURE GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIERThermal Characteristics (TA = 25°C unless otherwise noted)Parameter Symbol MB2M MB4M MB6M UnitDevic ..
MB6S ,Bridge RectifiersThermal Characteristics (T = 25°C unless otherwise noted)AParameter Symbol MB2S MB4S MB6S UnitDevic ..
MB7117E , Schottky TTL 2048-Bit Bipolar Programmable Read-Only Memory
MB71A38-25 , PROGRAMMABLE SCHOTTKY 16384-BIT READ ONLY MEMORY

MAX7453CSA-MAX7453EVKIT+
Triple-Channel Video Reconstruction Filter and Buffer for Composite and Y/C Outputs
General Description
The MAX7453 is a low-cost, triple-channel video recon-
struction filter for S-video and CVBS video-signal appli-
cations. This device is ideal for anti-aliasing and DAC
smoothing video applications such as set-top boxes,
DVD players, hard-disk recorders (HDRs), and personal
video recorders. This filter operates from a single +5V
supply. It is optimized for NTSC, PAL, and standard-defi-
nition TV (SDTV) video systems.
Each channel consists of a lowpass filter and an output
buffer capable of driving one (YOUT, COUT) or two
(CVOUT) standard 150Ωvideo loads. The output buffers
can drive either an AC or a DC load such that the blank-
ing level voltage after the backmatch resistor is less than
1V. The Y and C video inputs are summed to produce
the composite video output. The MAX7453 has a maxi-
mally flat frequency response.
The MAX7453 is available in an 8-pin SO package and is
fully specified over the commercial (0°C to +70°C) tem-
perature range.
Applications
Set-Top Boxes/HDRs/DVDs
Security Cameras/Digital Cameras
Game Consoles
Digital VCRs
Every Composite, S-Video Output for NTSC,
PAL, and SDTV
FeaturesTriple-Channel Filter and Buffer for CVBS and
Y/C (S-Video) Video SignalsFilter Response Ideal for NTSC, PAL, and
Interlaced SDTV Signals42dB (typ) Stopband Attenuation at 27MHz-0.3dB (typ) Passband Response<1V Blanking Level Allows DC-Coupled OutputCVOUT Drives Two 150ΩVideo Loads YOUT and COUT Drive One 150ΩVideo Load+5V Single-Supply Voltage8-Pin SO Package
MAX7453riple-Channel Video Reconstruction Filter and
Buffer for Composite and Y/C Outputs
19-3269; Rev 0; 6/05
EVALUATION KIT
AVAILABLE
D/ACINLOWPASS
FILTER
LOWPASS
FILTER
YIN
D/A
COUT
CVOUT
YOUT
GND
VCC
ENCODER
MAX7453
+6dB
+6dB
+6dB
Functional Diagram
Ordering Information
PARTTEMP RANGEPIN-PACKAGE
MAX7453CSA0°C to +70°C8 SO
CVOUT
COUTCIN
YOUT
VCCN.C.
GND
YIN
TOP VIEW
MAX7453
Pin Configuration
MAX7453riple-Channel Video Reconstruction Filter and
Buffer for Composite and Y/C Outputs
ABSOLUTE MAXIMUM RATINGS
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
VCCto GND...........................................................................+6V
All Other Pins to GND.................................-0.3V to (VCC+ 0.3V)
Maximum Current into Any Pin Except VCCand GND.....±50mA
Continuous Power Dissipation (TA= +70°C)
8-Pin SO....................................................................522.8mW
Operating Temperature Range...............................0°C to +70°C
Storage Temperature Range.............................-65°C to +150°C
Junction Temperature......................................................+150°C
Lead Temperature (soldering, 10s).................................+300°C
ELECTRICAL CHARACTERISTICS
(VCC= +5V ±5%, CL= 0 to 20pF, all loads to GND for DC-couple, all loads to VCC / 2 for AC-couple, CYIN= CCIN= 0.1µF,
RYOUT= 150Ω, RCOUT= 150Ω, RCVOUT= 75Ω, TA= TMINto TMAX, unless otherwise noted. Typical values are at TA= +25°C.)
PARAMETERSYMBOLCONDITIONSMINTYPMAXUNITS
Passband Responsef = 100kHz to 4.2MHz, relative to 100kHz-0.6-0.270dB
Stopband AttenuationASBf = 27MHz3942dB
Chroma/Luma Gainf = 3.58MHz, reference to CVOUT at 336kHz9698100%
Differential GaindG5-step modulated staircase0.150.5%
Differential Phasedθ5-step modulated staircase0.150.5Degrees
Signal-to-Noise RatioSNRPeak signal (2VP-P) to RMS noise,
f = 100Hz to 50MHz6773dB
Line-Time DistortionHDIST18µs, 100IRE bar0.3%
Field-Time DistortionVDIST130 lines, 18µs, 100IRE bar0.5%
Clamp Settling TimeTo ±1%300Lines
YOUT0.600.80.95
CVOUT0.600.80.95Output DC Clamp Level
COUT1.441.61.95
Low-Frequency Gain AccuracyAVf = 100kHz, relative to 6dB-3.0+2.0%
Group-Delay DeviationΔtgDeviation from 100kHz to 4.1MHz816ns
Group-Delay Matchingtg(MATCH)Low-frequency channel-to-channel matching,
f = 100kHz for YOUT and COUT2ns
Channel-to-Channel CrosstalkXTALKf = 100kHz to 3.58MHz61dB
Input Leakage CurrentIIN10µA
YINP-P1.2Input Dynamic SwingCINP-P0.9VP-P
SUPPLY
Supply Voltage RangeVCC4.755.25V
Supply CurrentICCVCC = +5.25V, no load6585mA
Power-Supply Rejection RatioPSRRVIN = 100mVP-P, f = 0 to 3.5MHz33dB
MAX7453riple-Channel Video Reconstruction Filter and
Buffer for Composite and Y/C Outputs
AMPLITUDE vs. FREQUENCY
MAX7453 toc01
FREQUENCY (MHz)
AMPLITUDE (dB)
NORMALIZED TO 0dB
PASSBAND AMPLITUDE vs. FREQUENCY
MAX7453 toc02
FREQUENCY (MHz)
AMPLITUDE (dB)
NORMALIZED TO 0dB
PHASE RESPONSE vs. FREQUENCY
MAX7453 toc03
FREQUENCY (MHz)
PHASE (DEGREES)
GROUP DELAY vs. FREQUENCY
MAX7453 toc04
FREQUENCY (MHz)
GROUP DELAY (ns)
2T RESPONSE (1IRE = 7.4mV)
MAX7453 toc05
100ns/div
YIN
200mV/div
YOUT
200mV/div
MEASURE AT
TERMINATION
MODULATED 12.5T RESPONSE
(1IRE = 7.14mV)
MAX7453 toc06
400ns/div
YIN
500mV/div
YOUT
500mV/div
MEASURE AT TERMINATION
SUPPLY CURRENT vs. TEMPERATURE
MAX7453 toc07
TEMPERATURE (°C)
SUPPLY CURRENT (mA)3510-15
DIFFERENTIAL GAIN
DIFFERENTIAL PHASE
MAX7453 toc08
DIFFERENTIAL GAIN (%)-0.3
1st2nd3rd4th5th6th
DIFFERENTIAL PHASE (DEGREES)
1st2nd3rd4th5th6th
MULTIBURST RESPONSE
MAX7453 toc09
10μs/div
YIN
500mV/div
YOUT
500mV/div
MEASURED AT TERMINATION
Typical Operating Characteristics
(VCC= +5V, TA= +25°C, unless otherwise noted.)
Detailed Description
The primary function of the MAX7453 is to filter and
buffer the encoder DAC outputs that contain digital
video information in applications such as set-top boxes,
HDRs, DVD players, and digital VCRs. This device
reconstructs and cleans up analog video signals. The
MAX7453 consists of a lowpass filter and a +6dB-gain
output video buffer. The luma (YIN) and chroma (CIN)
video inputs are summed internally to provide the com-
posite (CVOUT) video output.
These devices operate from a single +5V supply. The
filters have a nominal cutoff frequency optimized for
NTSC, PAL, and SDTV.
Filter
Filter Response
The reconstruction filter consists of two 2nd-order
Sallen-Key stages. The Butterworth-type response fea-
tures a maximally flat passband for NTSC and PAL
bandwidths. The stopband offers 42dB (typ) of attenua-
tion at sampling frequencies of 27MHz and above (see
the Typical Operating Characteristics).
Output Buffer
The YOUT and COUT buffers have a fixed +6dB gain
capable of driving one standard 150Ωvideo load with a
2VP-Psignal. The CVOUT buffer has a fixed +6dB gain,
capable of driving two 150Ωvideo loads. The MAX7453
can drive an AC load or drive the video load directly
without using the large output capacitor. The output
buffer of all the channels drives a DC load with an out-
put blanking level of less than 1V.
Output Clamp Level
When sync pulses in the luma signal (Y) are detected,
the DCrestore loop is activated. The function of the
loop is to set the sync tip of the video signal to the
desired DC level of 0.8V for YOUT and COUT, and to
set the average DC voltage of COUT at 1.6V.
Applications Information
Input Considerations
Use a 0.1µF ceramic capacitor to AC-couple the input
to the MAX7453. This input capacitor stores a DC level
such that the outputs are clamped to the appropriate
DC voltage level.
Output Considerations
The outputs of the MAX7453 are typically connected to
a 75Ωseries back-match resistor followed by the video
cable. Because of the inherent divide-by-two of this con-
figuration, the blanking level of the video cable is always
less than 1V, which complies with industry-standard
video requirements. The video buffer can also drive an
AC-coupled video load. Good video performance is
achieved with an output capacitor as low as 220µF.
Power-Supply Bypassing and Layout
The MAX7453 operates from a single +5V supply.
Bypass VCCto GND with a 0.1µF capacitor. Place all
external components as close to the device as possible.
The maximum power dissipation listed in the Absolute
Maximum Ratingssection assumes that the PC board is
a multilayer board with ground and power planes.
Chip Information
TRANSISTOR COUNT: 4100
PROCESS: BiCMOS
PINNAMEFUNCTIONYINLuma (Y) InputN.C.No Connection. No internal connection.GNDGroundCINChroma (C) InputCOUTChroma (C) OutputCVOUTComposite Video Output
7VCC5V Power SupplyYOUTLuma (Y) Output
Pin Description
MAX7453riple-Channel Video Reconstruction Filter and
Buffer for Composite and Y/C Outputs
MAX7453riple-Channel Video Reconstruction Filter and
Buffer for Composite and Y/C Outputs
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to /packages.)
SOICN .EPS
PACKAGE OUTLINE, .150" SOIC21-0041B
REV.DOCUMENT CONTROL NO.APPROVAL
PROPRIETARY INFORMATION
TITLE:
TOP VIEW
FRONT VIEW
MAX
INCHES
DIM
MIN
0.053A
MILLIMETERS
MIN
MAX
0.0500.016L0.401.27
0.3940.386D
MINDIM
INCHES
MAX
MILLIMETERS
MINMAXAC
0.3370.344AB8.758.5514
0.1890.197AA5.004.808MS012
SIDE VIEW0.2440.2285.806.200.050 BSC1.27 BSCEBA1
0∞-8∞
VARIATIONS:
This datasheet has been :
www.ic-phoenix.com
Datasheets for electronic components.

Partno	Mfg	Dc	Qty	Available	Descript
MAX7453CSA	MAXIM ?	N/a	8	avai	Triple-Channel Video Reconstruction Filter and Buffer for Composite and Y/C Outputs
MAX7453CSA	MAXIM	N/a	1000	avai	Triple-Channel Video Reconstruction Filter and Buffer for Composite and Y/C Outputs
MAX7453EVKIT+	N/A	N/a	2500	avai	Triple-Channel Video Reconstruction Filter and Buffer for Composite and Y/C Outputs