IC Phoenix
 
Home ›  MM62 > MAX5174AEEE-MAX5174BEEE,Low-Power, Serial, 12-Bit DACs with Voltage Output
MAX5174AEEE-MAX5174BEEE Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
MAX5174AEEEMaxim N/a55avaiLow-Power, Serial, 12-Bit DACs with Voltage Output
MAX5174BEEEMAXIMN/a15avaiLow-Power, Serial, 12-Bit DACs with Voltage Output


MAX5174AEEE ,Low-Power, Serial, 12-Bit DACs with Voltage OutputApplicationsPin ConfigurationIndustrial Process ControlsTOP VIEWDigital Offset and Gain AdjustmentO ..
MAX5174BEEE ,Low-Power, Serial, 12-Bit DACs with Voltage Outputfeatures include software and ' SPI/QSPI/MICROWIRE-Compatible 3-Wire Serialhardware shutdown, shutd ..
MAX517ACPA ,2-Wire Serial 8-Bit DACs with Rail-to-Rail OutputsMAX517/MAX518/MAX51919-0393; Rev 0; 5/952-Wire Serial 8-Bit DACs withRail-to-Rail Outputs__________ ..
MAX517ACPA+ ,2-Wire, Serial, 8-Bit DACs with Rail-to-Rail OutputsApplications________________Functional DiagramMinimum Component Analog SystemsDigital Offset/Gain A ..
MAX517ACSA ,2-Wire Serial 8-Bit DACs with Rail-to-Rail OutputsMAX517/MAX518/MAX51919-0393; Rev 0; 5/952-Wire Serial 8-Bit DACs withRail-to-Rail Outputs__________ ..
MAX517ACSA+ ,2-Wire, Serial, 8-Bit DACs with Rail-to-Rail OutputsMAX517/MAX518/MAX51919-0393; Rev 1; 9/022-Wire Serial 8-Bit DACs withRail-to-Rail Outputs__________ ..
MAX9693ESE ,Single/Dual, Ultra-Fast, ECL-Output Comparators with Latch EnableFeaturesThe MAX9691/MAX9692/MAX9693 are ultra-fast ECL 1.2ns Propagation Delaycomparators capable ..
MAX9694ETJ+ ,14 Programmable Gamma Reference Buffers with Four Static References for TFT LCDsfeatures. The EV kit2can also connect to a user-supplied I C interface cir-♦ 9V to 20V DC Power-Sup ..
MAX9698BCSE ,Single/Dual, Very Fast TTL Latched Output ComparatorsApplications Tech Support. Downloaded from: http://www.ic-phoenix.com/stock/MAX9686/MAX969819- ..
MAX969EEE ,Single/Dual/Quad / Micropower / Ultra-Low-Voltage / Rail-to-Rail I/O ComparatorsELECTRICAL CHARACTERISTICS(V = +1.6V to +5.5V, T = T to T , unless otherwise noted. Typical values ..
MAX969EEE ,Single/Dual/Quad / Micropower / Ultra-Low-Voltage / Rail-to-Rail I/O ComparatorsGeneral Description ________
MAX969EEE ,Single/Dual/Quad / Micropower / Ultra-Low-Voltage / Rail-to-Rail I/O ComparatorsApplications2-Cell Battery-Powered/Portable Systems ______________Ordering InformationWindow Compar ..


MAX5174AEEE-MAX5174BEEE
Low-Power, Serial, 12-Bit DACs with Voltage Output
General Description
The MAX5174/MAX5176 low-power, serial, voltage-out-
put, 12-bit digital-to-analog converters (DACs) feature a
precision output amplifier in a space-saving 16-pin
QSOP package. The MAX5174 operates from a single
+5V supply, and the MAX5176 operates from a single
+3V supply. Both devices draw only 280µA of supply
current, which reduces to 1µA in shutdown. In addition,
the programmable power-up reset feature allows for a
user-selectable output voltage state of either 0 or mid-
scale.
The 3-wire, digital, serial interface is compatible with
SPI™/QSPI™, and MICROWIRE™ standards. An input
register followed by a DAC register provides a double-
buffered input, allowing the input and DAC registers to
be updated independently or simultaneously with a 16-
bit serial word. Additional features include software and
hardware shutdown, shutdown lockout, a hardware
clear pin, and a reference input capable of accepting
DC and offset AC signals. These devices provide a pro-
grammable digital output pin for added functionality
and a serial-data output pin for daisy-chaining. All logic
inputs are TTL/CMOS compatible and are internally
buffered with Schmitt triggers to allow direct interfacing
to optocouplers.
The MAX5174/MAX5176 incorporate a proprietary on-
chip circuit that keeps the output voltage virtually
“glitch free,” limiting the glitches to a few millivolts dur-
ing power-up.
Both devices are available in 16-pin QSOP packages
and are specified for the extended (-40°C to +85°C)
temperature range. The MAX5170/MAX5172 are pin-
compatible 14-bit upgrades to the MAX5174/MAX5176.
For 100% pin-compatible DACs with internal reference,
see the 13-bit MAX5130/MAX5131 and the 12-bit
MAX5120/MAX5121 data sheets.
Applications

Industrial Process Controls
Digital Offset and Gain Adjustment
Motion Control
Automatic Test Equipment (ATE)
Remote Industrial Controls
µP-Controlled Systems
Features
±1 LSB INL1µA Shutdown Current“Glitch Free” Output Voltage at Power-UpSingle-Supply Operation
+5V (MAX5174)
+3V (MAX5176)
Full-Scale Output Range
+2.048V (MAX5176, VREF= +1.25V)
+4.096V (MAX5174, VREF= +2.5V )
Rail-to-Rail®Output AmplifierAdjustable Output OffsetLow THD (-80dB) in Multiplying OperationSPI/QSPI/MICROWIRE-Compatible 3-Wire Serial
Interface
Programmable Shutdown Mode and Power-Up
Reset
Buffered Output Capable of Driving 5kΩ|| 100pF
Loads
User-Programmable Digital Output Pin Allows
Serial Control of External Components
14-Bit Upgrades Available (MAX5170/MAX5172)
MAX5174/MAX5176
Low-Power, Serial, 12-Bit DACs
with Voltage Output

19-1475; Rev 0; 4/99
Pin Configuration
Ordering Information

SPI and QSPI are trademarks of Motorola, Inc.
MICROWIRE is a trademark of National Semiconductor Corp.
Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.
MAX5174/MAX5176
Low-Power, Serial, 12-Bit DACs
with Voltage Output
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS—MAX5174

(VDD= +5V ±10%, VREF= 2.5V, OS = AGND = DGND, RL= 5kΩ, CL= 100pF referenced to ground, TA= TMINto TMAX, unless
otherwise noted. Typical values are at TA= +25°C.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
VDDto AGND, DGND............................................-0.3V to +6.0V
AGND to DGND.....................................................-0.3V to +0.3V
Digital Inputs to DGND..........................................-0.3V to +6.0V
DOUT, UPO to DGND................................-0.3V to (VDD+ 0.3V)
OUT, REF to AGND ...................................-0.3V to (VDD+ 0.3V)
OS to AGND ...............................(AGND - 4.0V) to (VDD+ 0.3V)
Maximum Current into Any Pin............................................50mA
Continuous Power Dissipation (TA= +70°C)
16-Pin QSOP (derate 8mW/°C above +70°C)..............667mW
Operating Temperature Range...........................-40°C to +85°C
Storage Temperature Range.............................-65°C to +150°C
Lead Temperature (soldering, 10sec).............................+300°C
MAX5174/MAX5176
Low-Power, Serial, 12-Bit DACs
with Voltage Output
ELECTRICAL CHARACTERISTICS—MAX5174 (continued)

(VDD= +5V ±10%, VREF= 2.5V, OS = AGND = DGND, RL= 5kΩ, CL= 100pF referenced to ground, TA= TMINto TMAX, unless
otherwise noted. Typical values are at TA= +25°C.)
MAX5174/MAX5176
Low-Power, Serial, 12-Bit DACs
with Voltage Output
ELECTRICAL CHARACTERISTICS—MAX5176

(VDD= +2.7V to +3.6V, VREF= 1.25V, OS = AGND = DGND, RL= 5kΩ, CL= 100pF referenced to ground, TA= TMINto TMAX, unless
otherwise noted. Typical values are at TA= +25°C).
MAX5174/MAX5176
Low-Power, Serial, 12-Bit DACs
with Voltage Output
Note 2:
Offset is measured at the code that comes closest to 10mV.
Note 3:
Accuracy is better than 1 LSB for VOUT= 10mV to VDD- 180mV. Guaranteed by PSR test on end points.
Note 4:
RL= open and digital inputs are either VDDor DGND.
Note 5:
INL guaranteed between codes 20 and 4095.
ELECTRICAL CHARACTERISTICS—MAX5176 (continued)

(VDD= +2.7V to +3.6V, VREF= 1.25V, OS = AGND = DGND, RL= 5kΩ, CL= 100pF referenced to ground, TA= TMINto TMAX, unless
otherwise noted. Typical values are at TA= +25°C).
Low-Power, Serial, 12-Bit DACs
with Voltage Output
Typical Operating Characteristics

(MAX5174: VDD= +5V, VREF= 2.5V; MAX5176: VDD= +3V, VREF= +1.25V; CL = 100pF, OS = AGND, code = FFF hex, = +25°C, unless otherwise noted.)
MAX5174
MAX5174/MAX5176
Low-Power, Serial, 12-Bit DACs
with Voltage Outputypical Operating Characteristics (continued)

(MAX5174: VDD= +5V, VREF= 2.5V; MAX5176: VDD= +3V, VREF= +1.25V; CL = 100pF, OS = AGND, code = FFF hex, = +25°C, unless otherwise noted.)
MAX5174/MAX5176
Low-Power, Serial, 12-Bit DACs
with Voltage Outputypical Operating Characteristics (continued)

(MAX5174: VDD= +5V, VREF= 2.5V; MAX5176: VDD= +3V, VREF= +1.25V; CL = 100pF, OS = AGND, code = FFF hex, = +25°C, unless otherwise noted.)
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED