IC Phoenix
 
Home ›  MM49 > MAX4066,Low-Cost, Low-Voltage, Quad, SPST, CMOS Analog Switch
MAX4066 Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
MAX4066MAXN/a5avaiLow-Cost, Low-Voltage, Quad, SPST, CMOS Analog Switch


MAX4066 ,Low-Cost, Low-Voltage, Quad, SPST, CMOS Analog SwitchApplications♦ Wide Bandwidth: > 100MHzBattery-Operated Equipment______________Ordering Information ..
MAX4066ACEE ,Low-Cost, Low-Voltage, Quad, SPST, CMOS Analog SwitchesMAX4066/MAX4066A19-0439; Rev 1; 3/96Low-Cost, Low-Voltage, Quad, SPST, CMOS Analog Switches________ ..
MAX4066ACSD ,Low-Cost, Low-Voltage, Quad, SPST, CMOS Analog SwitchesFeaturesThe MAX4066/MAX4066A quad, SPST, CMOS analog' Pin Compatible with 74HC4066switches are desi ..
MAX4066ACSD+ ,Low-Cost, Low-Voltage, Quad, SPST, CMOS Analog SwitchFeaturesThe MAX4066/MAX4066A quad, SPST, CMOS analog♦ Pin Compatible with 74HC4066switches are desi ..
MAX4066ACSD+T ,Low-Cost, Low-Voltage, Quad, SPST, CMOS Analog SwitchELECTRICAL CHARACTERISTICS—Single +12V Supply(V+ = 12V ±10%, GND = 0V, V = 4.0V, V = 0.8V, T = T to ..
MAX4066AEEE ,Low-Cost, Low-Voltage, Quad, SPST, CMOS Analog SwitchesMAX4066/MAX4066A19-0439; Rev 1; 3/96Low-Cost, Low-Voltage, Quad, SPST, CMOS Analog Switches________ ..
MAX764CSA ,-5V/-12V/-15V or Adjustable, High-Efficiency, Low IQ DC-DC InvertersELECTRICAL CHARACTERISTICS(V+ = 5V, I = 0mA, C = 0.1µF, T = T to T , unless otherwise noted. Typic ..
MAX764CSA ,-5V/-12V/-15V or Adjustable, High-Efficiency, Low IQ DC-DC InvertersFeaturesThe MAX764/MAX765/MAX766 inverting switching regu-' High Efficiency for a Wide Range of Loa ..
MAX764CSA+ ,-5V/-12V/-15V or Adjustable, High-Efficiency, Low-IQ DC-DC InvertersMAX764/MAX765/MAX76619-0176; Rev 0; 6/94-5V/-12V/-15V or Adjustable,High-Efficiency, Low I DC-DC In ..
MAX764CSA+T ,-5V/-12V/-15V or Adjustable, High-Efficiency, Low-IQ DC-DC InvertersFeaturesThe MAX764/MAX765/MAX766 inverting switching regu-♦ High Efficiency for a Wide Range of Loa ..
MAX764ESA ,-5V/-12V/-15V or Adjustable, High-Efficiency, Low IQ DC-DC InvertersELECTRICAL CHARACTERISTICS(V+ = 5V, I = 0mA, C = 0.1µF, T = T to T , unless otherwise noted. Typic ..
MAX764ESA+ ,-5V/-12V/-15V or Adjustable, High-Efficiency, Low-IQ DC-DC InvertersGeneral Description ________


MAX4066
Low-Cost, Low-Voltage, Quad, SPST, CMOS Analog Switch
_______________General Description
The MAX4066/MAX4066A quad, SPST, CMOS analog
switches are designed to provide superior performance
over the industry-standard devices. These new switch-
es feature guaranteed operation from +2.0V to +16V
and are fully specified at 3V, 5V, and 12V. Both parts
offer 45Ωon-resistance and 2Ωchannel-to-channel
matching at 12V, plus 4Ωflatness over the specified
signal range.
Each device is controlled by TTL/CMOS input levels
and can be used as a bilateral switch or multiplexer/
demultiplexer.
Low off leakage current (100pA for the MAX4066A) and
low power consumption (0.5μW) make the MAX4066/
MAX4066A ideal for battery-operated equipment. These
parts are also suitable for low-distortion audio applica-
tions. Both devices are available in 14-pin DIP and SO
packages, as well as a 16-pin QSOP. ESD protection is
greater than 2000V per Method 3015.7.
________________________Applications

Battery-Operated Equipment
Audio and Video Signal Routing
Low-Voltage Data-Acquisition Systems
Sample-and-Hold Circuits
Communication Circuits
____________________________Features
Pin Compatible with 74HC4066Guaranteed On-Resistance:
170Ωmax (3V supply)
45Ωmax (12V supply)
Guaranteed Match Between Channels:max (MAX4066)max (MAX4066A)Guaranteed Low Leakage Currents:
1nA at +25°C (MAX4066)
100pA at +25°C (MAX4066A)
Single-Supply Operation from +2.0V to +16VV+ to GND Signal Handling TTL/CMOS-Logic CompatibleLow Power Consumption: 0.5μWLow Crosstalk: -86dBLow Off Isolation: -58dBLow Distortion: 0.03% Wide Bandwidth: > 100MHz
Low-Cost, Low-Voltage, Quad, SPST, OS Analog Switches

TRUTH TABLE

ON/OFF CONTROL
INPUT
OFF
STATE OF
ANALOG SWITCH
IN1
IN4
NO4COM2
NO2
COM1
NO1
TOP VIEW
MAX4066
MAX4066ACOM4
COM3
NO3GND
IN3
IN2
DIP/SO

V+
IN1
IN4
NO4
COM4
N.C.
COM3
NO3
NO1
COM1
N.C.
NO2
COM2
IN2
IN3
GND
MAX4066
MAX4066A
QSOP
N.C. = NO INTERNAL CONNECTION
______________________________________________Pin Configurations/Truth Table

19-0439; Rev 1; 3/96
PART
MAX4066CPD

MAX4066CSD
MAX4066CEE0°C to +70°C
0°C to +70°C
0°C to +70°C
TEMP. RANGEPIN-PACKAGE

14 Plastic DIP
14 Narrow SO
16 QSOP
______________Ordering Information
Ordering Information continued at end of data sheet.

* Contact factory for dice specifications.
MAX4066C/D0°C to +70°CDice*
________________________________________________________________Maxim Integrated Products1
& the latest literature: http://,
Low-Cost, Low-Voltage, Quad, SPST, OS Analog Switches_______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS—Single +12V Supply

(V+ = 12V ±10%, GND = 0V, VINH= 4.0V, VINL= 0.8V, TA= TMINto TMAX, unless otherwise noted.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
(Voltages referenced to GND)...........................................................................-0.3V to +17V
VIN_, VCOM_, VNO(Note 1)...........................-0.3V to (V + +0.3V)
Current (any terminal).........................................................30mA
Peak Current (any terminal)..............................................100mA
ESD per Method 3015.7..................................................>2000V
Continuous Power Dissipation (TA= +70°C)
Plastic DIP (derate 10.00mW/°C above +70°C)............800mW
Narrow SO (derate 8.00mW/°C above +70°C)..............640mW
QSOP (derate 9.52mW/°C above +70°C)......................762mW
CERDIP (derate 9.09mW/°C above +70°C)....................727mW
Operating Temperature Ranges
MAX4066C_ _/MAX4066AC_ _.............................0°C to +70°C
MAX4066E_ _/MAX4066AE_ _...........................-40°C to +85°C
MAX4066MJD/MAX4066AMJD.......................-55°C to +125°C
Storage Temperature Range.............................-65°C to +150°C
Lead Temperature (soldering, 10sec).............................+300°C
(Note 3)
V+ = 12V,
VCOM= 0V,
VNO= 10V
V+ = 12V,
ICOM= 2mA,
VNO= 10V
V+ = 12V,
ICOM= 2mA,
VNO= 10V, 5V, 1V
CONDITIONS

INO(OFF)NO or NC Off Leakage
Current (Note 6)-66
RFLAT(ON)On-Resistance Flatness
(Note 5)0V+VCOM,
VNOAnalog Signal Range4RONOn-Resistance Match
Between Channels (Note 4)0.52
UNITSMINTYPMAX
(Note 2)SYMBOLPARAMETER= +25°C
MAX4066
MAX4066ATA= +25°C= TMINto TMAX= +25°C= TMINto TMAX= +25°C= TMIN
to TMAX
MAX4066
MAX4066A
C, E
V+ = 12V,
VCOM= 0V,
VNO= 10V= +25°C
ICOM(OFF)COM Off Leakage Current
(Note 6)-66TA= TMIN
to TMAX
MAX4066
-0.10.1MAX4066A
C, E1
V+ = 12V,
VCOM= 10V,
VNO= 10V= +25°C
ICOM(ON)COM On Leakage Current
(Note 6)-1212TA= TMIN
to TMAX
MAX4066
-0.20.2MAX4066A
C, E2
C, E55
On-ResistanceRONΩ
V+ = 12V,
ICOM= 2mA,
VNO= 10V= TMIN
to TMAX75
Note 1:
Signals on NO_, COM_, or IN_ exceeding V+ or GND are clamped by internal diodes. Limit forward-diode current to
maximum current rating.
ANALOG SWITCH
Low-Cost, Low-Voltage, Quad, SPST, OS Analog Switches
_______________________________________________________________________________________3
ELECTRICAL CHARACTERISTICS—Single +12V Supply (continued)

(V+ = 12V ±10%, GND = 0V, VINH= 4.0V, VINL= 0.8V, TA= TMINto TMAX, unless otherwise noted.)
PARAMETERSYMBOLMINTYPMAX
(Note 2)UNITS

Input Current with Input
Voltage HighIINH-0.50.0050.5μA
CONDITIONS

IN = 5.0V, all others = 0.8V
Input Current with Input
Voltage LowIINL-0.50.0050.5μAIN = 0.8V, all others = 5.0V
Turn-On TimetON25100ns
Charge Injection
(Note 3)VCTE110pCCL= 1.0nF, VGEN= 0V,
RGEN= 0Ω, Figure 3= +25°C= TMINto TMAX150VCOM= 10V, Figure 2= +25°C= TMINto TMAX100VCOM= 10V, Figure 2Turn-Off TimetOFF1575ns
Power-Supply Range
Signal = 0dbm, Figure 4,
50Ωin and outOn-Channel BandwidthBW100MHz= +25°C= +25°CRL= 50Ω, CL= 5pF,
f = 1MHz, Figure 4Off Isolation (Note 7)VISO-58dB= +25°CRL= 50Ω, CL= 5pF,
f = 1MHz, Figure 5Crosstalk (Note 8)VCT-86dB= +25°Cf = 1MHz, Figure 6NO CapacitanceC(OFF)9pF= +25°Cf = 1MHz, Figure 6COM Off CapacitanceCCOM(OFF)9pF= +25°Cf = 1MHz, Figure 6COM On CapacitanceCCOM(ON)pF
Supply CurrentVIN= 0V or V+,
all channels on or offTA= TMINto TMAX-10.0011μA
Total Harmonic
DistortionTHDTA= TMINto TMAX0.03%= +25°C
LOGIC INPUT
SUPPLY
DYNAMIC
Low-Cost, Low-Voltage, Quad, SPST, OS Analog Switches_______________________________________________________________________________________
PARAMETERSYMBOLMINTYPMAX
(Note 2)UNITS

Analog Signal RangeVCOM,
VNO0V+V
CONDITIONS

(Note 3)
On-ResistanceRON75
V+ = 4.5V,
ICOM= -1.0mA,
VNO= 3.5V
Turn-On TimetON43125nsVNO = 3V
On-Channel
BandwidthBW100MHzSignal = 0dBm,
50Ωin and out, Figure 4
Turn-Off TimetOFF1875nsVNO = 3V
Positive Supply CurrentI+-11μA
Charge Injection
(Note 3)Q210pCVGEN= 0V, RGEN= 0V,= 1.0nF, Figure 3= +25°C= +25°C= +25°C= +25°C= +25°C= +25°C= TMINto TMAX= TMINto TMAX
On-Resistance Match
Between Channels (Note 4)ΔRON
0.34Ω
V+ = 5V,
ICOM= -1.0mA,
VNO= 3V
On-Resistance Flatness
(Notes 3, 5)RFLAT(ON)6
V+ = 5V,
ICOM= -1.0mA,
VNO= 1V, 3V
NO Off Leakage
Current (Note 6)INO(OFF)1
V+ = 5.5V,
VCOM= 0V,
VNO= 4.5V
COM Off Leakage Current
(Note 6)ICOM(OFF)1
V+ = 5.5V,
VCOM= 0V,
VNO= 4.5V
COM On Leakage Current
(Note 6)ICOM(ON)2
V+ = 5.5V,
VCOM= 5V,
VNO= 4.5V6
-100100= TMIN
to TMAX= TMIN
to TMAX= TMIN
to TMAX
C, E
C, E
C, E
-1212= +25°C= +25°C= TMINto TMAX= TMINto TMAX
125= +25°C
V+ = 5.5V, VIN= 0V or V+, all channels on or off
ELECTRICAL CHARACTERISTICS—Single +5V Supply

(V+ = 5V ±10%, V- = 0V ±10%, GND = 0V, VINH= 2.4V, VINL= 0.8V, TA= TMINto TMAX, unless otherwise noted.)
125= TMIN
to TMAX
ANALOG SWITCH
DYNAMIC
SUPPLY

C, E
MAX4066
MAX4066A
MAX4066
MAX4066A
MAX4066
MAX4066A
-0.10.1
Low-Cost, Low-Voltage, Quad, SPST, OS Analog Switches
_______________________________________________________________________________________5
PARAMETERSYMBOLMINTYPMAX
(Note 2)UNITS

Analog Signal RangeVCOM,
VNO0V+V
CONDITIONS

(Note 3)
Channel On-ResistanceRON
170Ω
V+ = 3V,
ICOM= -1.0mA,
VNO= 1.5V
Turn-On Time (Note 3)tON80185nsV+ = 3V,
VNOor VNC= 1.5V
Turn-Off Time (Note 3)tOFF28150nsV+ = 3V,
VNOor VNC= 1.5V
Positive Supply CurrentI+-10.0011μA
Charge Injection (Note 3)Q210pCCL= 1.0nF,
VGEN= 0V, RGEN= 0V
V+ = 3.6V, VIN= 0V or V+, all channels on or off= +25°C= +25°C= +25°C= +25°C= TMINto TMAX= TMINto TMAX= TMINto TMAX
ANALOG SWITCH
DYNAMIC
SUPPLY
Note 2:The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in
this data sheet.
Note 3:
Guaranteed by design.
Note 4:
ΔRON= RON(max) - RON(min).
Note 5:
Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the
specified analog signal range.
Note 6:
Leakage parameters are 100% tested at maximum-rated hot temperature and guaranteed by correlation at +25°C.
Note 7:
Off Isolation = 20log10(VCOM/ VNO), VCOM= output, VNO= input to off switch.
Note 8:
Between any two switches.
ELECTRICAL CHARACTERISTICS—Single +3V Supply

(V+ = 2.7V to 3.3V ±10%, GND = 0V, VINH= 2.4V, VINL= 0.8V, TA= TMINto TMAX, unless otherwise noted.)
Low-Cost, Low-Voltage, Quad, SPST, OS Analog Switches_______________________________________________________________________________________
__________________________________________Typical Operating Characteristics

(TA = +25°C, unless otherwise noted.)
ON-RESISTANCE vs. VCOM
MAX4066-01
VCOM (V)
(W
A: V+ = 2.5V
B: V+ = 3.0V
C: V+ = 5V
D: V+ = 10V
E: V+ = 15V
V- = 0VE246810121416
ON-RESISTANCE vs. VCOM AND
TEMPERATURE

MAX4066-02
VCOM (V)
(W
A: TA = -55°C
B: TA = +25°C
C: TA = +85°C
D: TA = +125°C
V+ = 5V
OFF LEAKAGE CURRENT
vs. TEMPERATURE
MAX4066-03
TEMPERATURE (°C)
(n
V+ = 5.5V
VCOM = 0V
VNO = 4.5V
ON LEAKAGE CURRENT
vs. TEMPERATURE
MAX4066-04
TEMPERATURE (°C)
(n
FREQUENCY RESPONSE
MAX4066-07
FREQUENCY (MHz)
(d
(d
gre
ON
PHASE
ON RESPONSE
OFF ISOLATION
V+ = 5V
INPUT = 0dBm
50W IN AND OUT46810120
CHARGE INJECTION
vs. VCOM

MAX4066-05
VCOM (V)
E (p
A: V+ = 12V
B: V+ = 5V
C: V+ = 3V
SUPPLY CURRENT
vs. TEMPERATURE
MAX4066-06
TEMPERATURE (°C)
(m
V+ = 5.5V
I+
0.011001k10k20k
TOTAL HARMONIC
DISTORTION vs. FREQUENCY

AX4066-08
FREQUENCY (Hz)
(%
V+ = 12V
5Vp-p SIGNAL
600W IN AND OUT
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED