IC Phoenix
 
Home ›  MM41 > MAX309,Precision, 8-Channel/Dual 4-Channel, High-Performance, CMOS Analog Multiplexers
MAX309 Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
MAX309MAXN/a147avaiPrecision, 8-Channel/Dual 4-Channel, High-Performance, CMOS Analog Multiplexers


MAX309 ,Precision, 8-Channel/Dual 4-Channel, High-Performance, CMOS Analog MultiplexersApplicationsMAX308CSE 0°C to +70°C 16 Narrow SOSample-and-Hold CircuitsMAX308C/D 0°C to +70°C Dice* ..
MAX3093ECSE+ ,±15kV ESD-Protected, 10Mbps, 3V/5V, Low-Power Quad RS-422/RS-485 ReceiversMAX3093E/MAX3094E19-1779; Rev 2; 10/02±15kV ESD-Protected, 10Mbps, 3V/5V, Low-Power Quad RS-422/RS ..
MAX3093ECUE ,【15kV ESD-Protected, 10Mbps, 3V/5V, Low-Power Quad RS-422/RS-485 ReceiversELECTRICAL CHARACTERISTICS—MAX3093E(V = +5V ±5%, T = T to T , unless otherwise noted. Typical value ..
MAX3093ECUE+ ,±15kV ESD-Protected, 10Mbps, 3V/5V, Low-Power Quad RS-422/RS-485 ReceiversApplicationsMAX3093ECSE 0°C to +70°C 16 Narrow SOTelecommunications EquipmentMAX3093ECPE 0°C to +70 ..
MAX3093EEPE ,【15kV ESD-Protected, 10Mbps, 3V/5V, Low-Power Quad RS-422/RS-485 ReceiversELECTRICAL CHARACTERISTICS—MAX3093E(V = +5V ±5%, T = T to T , unless otherwise noted. Typical value ..
MAX3093EESE ,【15kV ESD-Protected, 10Mbps, 3V/5V, Low-Power Quad RS-422/RS-485 ReceiversMAX3093E/MAX3094E19-1779; Rev 2; 10/02±15kV ESD-Protected, 10Mbps, 3V/5V, Low-Power Quad RS-422/RS ..
MAX6341 ,1ppm/°C, Low-Noise, +2.5V/+4.096V/+5V Voltage ReferencesApplications Ordering InformationHigh-Resolution Analog-to-Digital MAXand Digital-to-Analog Convert ..
MAX6341CSA+ ,1ppm/°C, Low-Noise, +2.5V/+4.096V/+5V Voltage ReferencesMAX6325/MAX6341/MAX63501ppm/°C, Low-Noise, +2.5V/+4.096V/+5VVoltage References
MAX6341ESA+ ,1ppm/°C, Low-Noise, +2.5V/+4.096V/+5V Voltage ReferencesApplications Ordering InformationHigh-Resolution Analog-to-Digital MAXand Digital-to-Analog Convert ..
MAX6342LUT-T ,Microprocessor reset circuit with power-fail comparator. Reset threshold 4.63V. Push-pull active-low reset output, manual-reset input.Applicationsreset thresholds from 2.33V to 4.63V (see Selector Guides 1, 2).Portable ComputersInser ..
MAX6342MUT-T ,Microprocessor reset circuit with power-fail comparator. Reset threshold 4.38V. Push-pull active-low reset output, manual-reset input.ELECTRICAL CHARACTERISTICS(V = +1.0V to +5.5V, T = -40°C to +85°C, unless otherwise noted. Typical ..
MAX6342TUT-T ,Microprocessor reset circuit with power-fail comparator. Reset threshold 3.08V. Push-pull active-low reset output, manual-reset input.Applicationsreset thresholds from 2.33V to 4.63V (see Selector Guides 1, 2).Portable ComputersInser ..


MAX309
Precision, 8-Channel/Dual 4-Channel, High-Performance, CMOS Analog Multiplexers
_______________General Description
The MAX308/MAX309 precision, monolithic, CMOS ana-
log multiplexers (muxes) offer low on-resistance (less
than 100Ω), which is matched to within 5Ωbetween
channels and remains flat over the specified analog sig-
nal range (7Ωmax). They also offer low leakage over
temperature (NO-off leakage current less than 5nA at
+85°C) and fast switching speeds (transition time less
than 250ns). The MAX308 is a single-ended 1-of-8
device, and the MAX309 is a differential 2-of-4 device.
The MAX308/MAX309 are fabricated with Maxim’s
improved 44V silicon-gate process. Design improve-
ments yield extremely low charge injection (less than
10pC) and guarantee electrostatic discharge protection
greater than 2000V.
These muxes operate with a single +5V to +30V supply
or bipolar ±5V to ±20V supplies, while retaining
TTL/CMOS-logic input compatibility and fast switching.
CMOS inputs provide reduced input loading. These
improved parts are plug-in upgrades for the industry-
standard DG408, DG409, DG508A, and DG509A.
________________________Applications

Sample-and-Hold Circuits
Automatic Test Equipment
Heads-Up Displays
Guidance and Control Systems
Military Radios
Communications Systems
Battery-Operated Systems
PBX, PABX
Audio Signal Routing
____________________________Features
Guaranteed On-Resistance Match BetweenChannels, <5ΩMaxLow On-Resistance, <100ΩMaxGuaranteed Flat On-Resistance over Specified
Signal Range, 7ΩMax
Guarateed Low Charge Injection, <10pCNO-Off Leakage Current <5nA at +85°CCOM-Off Leakage Current <20nA at +85°CESD Protection >2000VPlug-In Upgrade for Industry-Standard
DG408/DG409/DG508A/DG509A
Single-Supply Operation (+5V to +30V)
Bipolar-Supply Operation (±5V to ±20V)
Low Power Consumption, <300µWRail-to-Rail Signal HandlingTTL/CMOS-Logic Compatible
______________Ordering Information
MAX308/MAX309
Precision, 8-Channel/Dual 4-Channel,
High-Performance, CMOS Analog Multiplexers

CMOS DECODE LOGICA1A0EN
NO8
NO7
NO6
NO5
NO4
NO3
NO2
NO1
COMV-GND
MAX308 8-CHANNEL SINGLE-ENDED MULTIPLEXER

A1
GNDNO1
TOP VIEW
MAX308
NO5
NO6
NO7
NO8COM
NO4
NO3
NO2
DIP/SO/TSSOP

Continued at end of data sheet.
_____________________Pin Configurations/Functional Diagrams/Truth Tables

19-0271; Rev 2; 8/02
PART
MAX308CPE

MAX308CSE
MAX308C/D0°C to +70°C
0°C to +70°C
0°C to +70°C
TEMP RANGEPIN-PACKAGE

16 Plastic DIP
16 Narrow SO
Dice*
Ordering Information continued at end of data sheet.

*Contact factory for dice specifications.
**Contact factory for availability.
MAX308EPE-40°C to +85°C16 Plastic DIP
MAX308ESE-40°C to +85°C16 Narrow SO
MAX308EJE-40°C to +85°C16 CERDIP
MAX308MJE-55°C to +125°C16 CERDIP**
MAX308CUE0°C to +70°C16 TSSOP
MAX308EUE-40°C to +85°C16 TSSOP
MAX308/MAX309
Precision, 8-Channel/Dual 4-Channel,
High-Performance, CMOS Analog Multiplexers
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS—Dual Supplies

(V+ = +15V, V- = -15V, GND = 0V, VAH= +2.4V, VAL= +0.8V, TA= TMINto TMAX, unless otherwise noted.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Voltage Referenced to V-............................................................................-0.3V, 44V
GND.........................................................................-0.3V, 25V
Digital Inputs, NO, COM (Note 1)...........(V- - 2V) to (V+ + 2V) or
30mA, (whichever occurs first)
Continuous Current (any terminal)......................................30mA
Peak Current, NO or COM
(pulsed at 1ms, 10% duty cycle max)..........................100mA
Continuous Power Dissipation (TA= +70°C)
Plastic DIP (derate 10.53mW/°C above +70°C)..........842mW
Narrow SO (derate 8.70mW/°C above +70°C)............696mW
CERDIP (derate 10.00mW/°C above +70°C)...............800mW
TSSOP (derate 6.7mW/°C above +70°C)....................457mW
Operating Temperature Ranges
MAX30_C_ _.......................................................0°C to +70°C
MAX30_E_ _.....................................................-40°C to +85°C
MAX30_MJE..................................................-55°C to +125°C
Storage Temperature Range.............................-65°C to +150°C
Lead Temperature (soldering, 10sec).............................+300°C
VCOM= ±10V,
VNO= ±10V,
sequence
each switch
VNO= +10V,
VCOM= ±10V,
VEN= 0V
VCOM= +10V,
VNO= ±10V,
VEN= 0V
INO= -1.0mA,
VCOM= ±10V
INO= -1.0mA,
VCOM= ±10V (Note 4)
VNO= ±10V,
VCOM= +10V,
VEN= 0V
CONDITIONS

ICOM(ON)COM-On Leakage Current
(Note 5)5
ICOM(OFF)COM-Off Leakage Current
(Note 5)5
INO(OFF)NO-Off Leakage Current
(Note 5)-2.52.5125RONOn-Resistance
1.55Ω8ΔRONOn-Resistance Matching
Between Channels
UNITSMINTYPMAX
(Note 2)SYMBOLPARAMETER
Note 1:
Signals on NO, COM, EN, A0, A1, or A2 exceeding V+ or V- are clamped by internal diodes. Limit forward current to
maximum current ratings.-1515VNO,
VCOMAnalog Signal Range
INO= -1.0mA,
VCOM= ±5V or 0V
1.87Ω10RFLATOn-Resistance Flatness
(Note 3)= +25°C= TMINto TMAX= +25°C= TMINto TMAX= +25°C= TMINto TMAX
-0.50.010.5TA= +25°C= TMIN
to TMAX= +25°C= TMIN
to TMAX= +25°C= TMIN
to TMAX= +25°C= TMIN
to TMAX= +25°C= TMIN
to TMAX
MAX309
MAX308
MAX309
MAX308
C, E
C, E
C, E
C, E
C, E
SWITCH
MAX308/MAX309
Precision, 8-Channel/Dual 4-Channel,
High-Performance, CMOS Analog Multiplexers
ELECTRICAL CHARACTERISTICS—Dual Supplies (continued)

(V+ = +15V, V- = -15V, GND = 0V, VAH= +2.4V, VAL= +0.8V, TA= TMINto TMAX, unless otherwise noted.)
Off Isolation
(Note 6)dB-75VISO
210QCharge Injection
(Note 3)300
150tOFF(EN)Enable Turn-Off Time225tON(EN)Enable Turn-On Time851501040tOPENBreak-Before-Make Interval175-1.01.0IALInput Current with
Input Voltage Low-1.01.0IAHInput Current with
Input Voltage High-1010I-Negative Supply Current-11Positive Supply Current0.0750.5±5±20Power-Supply Range30µA75
UNITSMINTYPMAX
(Note 2)SYMBOLPARAMETER

Crosstalk Between ChannelsVCT-92dB
Logic Input CapacitanceCIN8pF
NO-Off CapacitanceCNO(OFF)3pF
COM-Off CapacitanceCCOM(OFF)
f = 1MHz,
VEN= 0.8V
VCOM= 0V,
Figure 814
COM-On CapacitanceCCOM(ON)
f = 1MHz,
VEN= 2.4V
VCOM= 0V,
Figure 825= +25°C
VEN= 0V or 2.4V,= 0V= +25°C= 2.4V or 15V= TMINto TMAX= +25°C= TMINto TMAX= TMINto TMAX= +25°C= +25°C= +25°C= TMINto TMAX= +25°C= +25°C= +25°C= TMINto TMAX
CONDITIONS
= +25°C= +25°C= +25°C= +25°C= +25°C
VEN= 0V,= 1kΩ,
f = 100kHz, Figure 6= 1.0nF,
VNO= 0V,= 0Ω, Figure 5
Figure 3
Figure 3
VEN= 2.4V,
VA(ALL)= 0V or 2.4V
Figure 4
VEN= 2.4V,
VA(ALL)= 0V or 2.4V
VEN= VA= 0V or 4.5V
VEN= 2.4V,
f = 100kHz,
VGEN= 1VP-P,= 1kΩ, Figure 7
f = 1MHz
f = 1MHz,
VEN= VNO= 0V,
Figure 8
MAX308
MAX309
MAX308
MAX309250tTRANSTransistion TimeTA= TMINto TMAXFigure 2
INPUT
SUPPLY
DYNAMIC

MAX308/MAX309
Precision, 8-Channel/Dual 4-Channel,
High-Performance, CMOS Analog Multiplexers

(Note 3)
CONDITIONS
= 1.0nF,
VNO= 0V,= 0Ω
VINH= 2.4V,
VINL= 0V,
VNO1= 5V,
Figure 3
VINH= 2.4V,
VINL= 0V,
VNO1= 5V,
Figure 3
VNO1= 8V,
VNO8= 0V,
VIN= 2.4V,
Figure 2
INO= -1.0mA
VCOM= 3V or 10V210QCharge Injection
(Note 3)75300tOFF(EN)Enable Turn-Off Time
(Note 3)012VNO,
VCOMAnalog Signal Range100600tON(EN)Enable Turn-On Time
(Note 3)115450tTRANSTransition Time
(Note 3)120175RONOn-Resistance
UNITSMINTYPMAX
(Note 2)SYMBOLPARAMETER
ELECTRICAL CHARACTERISTICS—Single Supply

(V+ = +12V, V- = 0V, GND = 0V, VAH= +2.4V, VAL= +0.8V, TA= TMINto TMAX, unless otherwise noted.)
Note 2:
The algebraic convention where the most negative value is a minimum and the most positive value a maximum is used in
this data sheet.
Note 3:
Guaranteed by design.
Note 4:
ΔRON= RON(MAX)- RON(MIN).On-resistance match between channels and flatness are guaranteed only with specified
voltages. Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured at
the extremes of the specified analog signal range.
Note 5:
Leakage parameters are 100% tested at the maximum rated hot temperature and guaranteed by correlation at +25°C.
Note 6:
Off isolation = 20log VCOM/VNO, where VCOM= output and VNO= input to off switch.= +25°C= +25°C= +25°C= +25°C= +25°C
SWITCH
DYNAMIC
MAX308/MAX309
Precision, 8-Channel/Dual 4-Channel,
High-Performance, CMOS Analog Multiplexers

ON-RESISTANCE vs. VCOM
(DUAL SUPPLIES)
MAX308/9 TOC-01
VCOM (V)
±5V
±10V
±15V
±20V
ON-RESISTANCE vs. VCOM AND
TEMPERATURE (DUAL SUPPLIES)
MAX308/9 TOC-02
VCOM (V)
+125°C
+85°C
+25°C
-55°C
V+ = +15V
V- = -15V
ON-RESISTANCE vs. VCOM
(SINGLE SUPPLY)
MAX308/9 TOC-03
VCOM (V)5V
10V
15V
20V
ON-RESISTANCE vs. VCOM AND
TEMPERATURE (SINGLE SUPPLY)
MAX308/9 TOC-041050
VCOM (V)
+125°C
+85°C
+25°C
-55°C
V+ = 15V
V- = 0V
CHARGE INJECTION vs. VCOM

MAX308/9 TOC-07
VCOM (V)
j (pC)V+ = 12V
V- = 0V
V+ = +15V
V- = -15V
OFF LEAKAGE vs. TEMPERATURE
MAX308/9 TOC-05
TEMPERATURE (°C)
OFF LEAKAGE (nA)
INO (OFF)
ICOM (ON)
V+ = 15V
V- = -15V
ON LEAKAGE vs. TEMPERATURE
MAX308/9 TOC-05
TEMPERATURE (°C)
ON LEAKAGE (nA)
ICOM (ON)
V+ = 15V
V- = -15V
SUPPLY CURRENT vs. TEMPERATURE
MAX4308/9-TOC8
TEMPERATURE (°C)
I+, I- (µA)
V+ = +15V
V- = -15V
VEN = VA = 0V, 4.5V
__________________________________________Typical Operating Characteristics

(TA = +25°C, unless otherwise noted.)
__________Applications Information
Operation with
Supply Voltages Other than 15V

Using supply voltages less than ±15V will reduce the
analog signal range. The MAX308/MAX309 switches
operate with ±5V to ±20V bipolar supplies or with a
+5V to +30V single supply. Connect V- to GND when
operating with a single supply. Both device types can
also operate with unbalanced supplies, such as +24V
and -5V. The Typical Operating Characteristicsgraphs
show typical on-resistance with 20V, 15V, 10V, and 5V
supplies. (Switching times increase by a factor of two
or more for operation at 5V.)
Overvoltage Protection

Proper power-supply sequencing is recommended for
all CMOS devices. Do not exceed the absolute maxi-
mum ratings, because stresses beyond the listed rat-
ings may cause permanent damage to the devices.
Always sequence V+ on first, then V-, followed by the
logic inputs, NO, or COM. If power-supply sequencing
is not possible, add two small signal diodes in series
with supply pins for overvoltage protection (Figure 1).
Adding diodes reduces the analog signal range to 1V
below V+ and 1V above V-, but does not affect the
devices’ low switch resistance and low leakage charac-
teristics. Device operation is unchanged, and the differ-
ence between V+ and V- should not exceed +44V.
MAX308/MAX309
Precision, 8-Channel/Dual 4-Channel,
High-Performance, CMOS Analog Multiplexers
______________________________________________________________Pin Description

COM
Figure 1. Overvoltage Protection Using External Blocking
Diodes
PIN
MAX308MAX309NAMEFUNCTION

1, 15, 16A0, A2, A1Address Inputs
A0, A1Address Inputs2ENEnable Input3V-Negative Supply Voltage Input
4–7—NO1–NO4Analog Inputs—Bidirectional4–7NO1A–NO4AAnalog Inputs—Bidirectional—COMAnalog Output—Bidirectional8, 9COMA, COMBAnalog Outputs—Bidirectional
9–12—NO8–NO5Analog Inputs—Bidirectional10–13NO4B–NO1BAnalog Inputs—Bidirectional14V+Positive Supply Voltage Input15GNDGround
1, 16
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED