MAX3061EEKA#TG16 Fast Delivery |IC PHOENIX CO.,LIMITED

MAX3061EEKA#TG16 ,±15kV ESD-Protected, Fail-Safe, 20Mbps, Slew-Rate-Limited RS-485/RS-422 Transceivers in a SOTApplicationsDATA SLEW-Industrial-Control Local-Area NetworksTRANSCEIVERSPART RATE RATEON BUS(Mbps) ..
MAX306CPI ,Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog MultiplexersGeneral Description ________
MAX306CPI+ ,Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog MultiplexersElectrical Characteristics—Dual Supplies(V+ = +15V, V- = -15V, GND = 0V, V = +2.4V, V = +0.8V, T = ..
MAX306CWI ,Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog MultiplexersELECTRICAL CHARACTERISTICS—Dual Supplies(V+ = +15V, V- = -15V, GND = 0V, VAH = +2.4V, VAL = +0.8V, ..
MAX306CWI ,Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog MultiplexersApplicationsMAX306CWI 0°C to +70°C 28 Wide SOSample-and-Hold CircuitsMAX306C/D 0°C to +70°C Dice*Te ..
MAX306CWI+ ,Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog MultiplexersMAX306/MAX307 Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers
MAX629ESA ,28V, Low-Power, High-Voltage, Boost or Inverting DC-DC Converterfeatures an' Internal, 500mA, 28V N-Channel Switch internal N-channel MOSFET switch and programmabl ..
MAX629ESA ,28V, Low-Power, High-Voltage, Boost or Inverting DC-DC ConverterApplications___________Typical Operating CircuitV VIN IN+2.7V +2.7VTO +5.5V TO +5.5VV OUTV VCC CC28 ..
MAX629ESA ,28V, Low-Power, High-Voltage, Boost or Inverting DC-DC ConverterELECTRICAL CHARACTERISTICS(V = +5V, C = 0.1µF, T = -40°C to +85°C, unless otherwise noted. Typical ..
MAX629ESA ,28V, Low-Power, High-Voltage, Boost or Inverting DC-DC ConverterApplications*Dice are tested at T = +25°C, DC parameters only.APositive or Negative LCD Bias Genera ..
MAX629ESA+ ,28V, Low-Power, High-Voltage, Boost or Inverting DC-DC ConverterApplications*Dice are tested at T = +25°C, DC parameters only.APositive or Negative LCD Bias Genera ..
MAX629ESA+ ,28V, Low-Power, High-Voltage, Boost or Inverting DC-DC Converterfeatures an♦ Internal, 500mA, 28V N-Channel Switch internal N-channel MOSFET switch and programmabl ..

MAX3061EEKA#TG16
±15kV ESD-Protected, Fail-Safe, 20Mbps, Slew-Rate-Limited RS-485/RS-422 Transceivers in a SOT
MAX3060E/MAX3061E/MAX3062E
±15kV ESD-Protected, Fail-Safe, 20Mbps, Slew-Rate-
Limited RS-485/RS-422 Transceivers in a SOT
General Description
The MAX3060E/MAX3061E/MAX3062E high-speed
transceivers for RS-485/RS-422 communication contain
one driver and one receiver. These devices feature fail-
safe circuitry, which guarantees a logic-high receiver
output when the receiver inputs are open or shorted.
This means that the receiver output is a logic high if all
transmitters on a terminated bus are disabled (high
impedance). These devices also feature hot-swap cir-
cuitry that eliminates data glitches during hot insertion.
The MAX3060E features slew-rate-limited drivers that
minimize EMI and reduce reflections caused by
improperly terminated cables, allowing error-free data
transmission up to 115kbps. The MAX3061E, also slew-
rate limited, transmits up to 500kbps. The MAX3062E
driver is not slew-rate limited, allowing transmit speeds
up to 20Mbps. All transmitter outputs are protected to
±15kV using the Human Body Model.
These transceivers typically draw 910µA of supply
current when unloaded, or 790µA when fully loaded
with the drivers disabled.
All devices have a 1/8-unit-load receiver input imped-
ance that allows up to 256 transceivers on the bus. These
devices are intended for half-duplex communication.
Applications
RS-422/RS-485 Communications
Level Translators
Transceivers for EMI-Sensitive Applications
Industrial-Control Local-Area Networks
FeaturesTrue Fail-Safe Receiver While Maintaining
EIA/TIA-485 CompatibilityEnhanced Slew-Rate Limiting Facilitates
Error-Free Data Transmission (MAX3060E and
MAX3061E)1nA Low-Current Shutdown Mode Hot-Swappable for Telecom ApplicationsESD Protection: ±15kV Human Body ModelAllow Up to 256 Transceivers on the BusSpace-Saving 8-Pin SOT23 Package
19-2536; Rev 1; 7/07
Ordering Information
PARTTEMP RANGEPIN-
PACKAGE
TOP
MARK
MAX3060EEKA-T-40°C to +85°C8 SOT23-8AAKI
MAX3060EEKA#T-40°C to +85°C8 SOT23-8AEPA*
MAX3061EEKA-T-40°C to +85°C8 SOT23-8AAKJ
MAX3061EEKA#T-40°C to +85°C8 SOT23-8AEPB*
MAX3062EEKA-T-40°C to +85°C8 SOT23-8AAKK
MAX3062EEKA#T-40°C to +85°C8 SOT23-8AEPC*
Selector Guide
PART
DATA
RATE
(Mbps)
SLEW-
RATE
LIMITED
TRANSCEIVERS
ON BUS
MAX3060E0.115Yes256
MAX3061E0.5Yes256
MAX3062E20No256
MAX3060E
MAX3061E
MAX3062E
VCC
0.1μF
GND DIRRtAB
TOP VIEW
+5V
Typical Operating Circuit/Pin Configuration
*Indicates an RoHS-compliant part
T = Tape and Reel
MAX3060E/MAX3061E/MAX3062E
±15kV ESD-Protected, Fail-Safe, 20Mbps, Slew-Rate-
Limited RS-485/RS-422 Transceivers in a SOT
ABSOLUTE MAXIMUM RATINGS
DC ELECTRICAL CHARACTERISTICS
(VCC= +5V ±5%, TA= TMINto TMAX, unless otherwise noted. Typical values are at VCC= +5V and TA= +25°C.) (Notes 1, 2)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
All Voltages with Respect to GND
Supply Voltage (VCC) ............................................................+7V
Input Voltage (RE, DE, DI)..........................-0.3V to (VCC+ 0.3V)
Driver Output/Receiver Input Voltage (A, B).......-7.5V to +12.5V
Receiver Output Voltage (RO)....................-0.3V to (VCC+ 0.3V)
Continuous Power Dissipation (TA= +70°C)
8-Pin SOT23 (derate 8.9mW/°C above +70°C)............714mW
Operating Temperature Range
MAX306_EE_ _................................................-40°C to +85°C
Storage Temperature Range.............................-65°C to +150°C
Junction Temperature......................................................+150°C
Lead Temperature (soldering, 10s).................................+300°C
PARAMETERSYMBOLCONDITIONSMINTYPMAXUNITS
DRIVER
Differential Driver Output
(No Load)VOD1VCC = 5V5V
Figure 1, R = 50Ω (RS-422)2.0Differential Driver OutputVOD2Figure 1, R = 27Ω (RS-485)1.5V
Change in Magnitude of
Differential Output VoltageΔVODFigure 1, R = 50Ω or R = 27Ω (Note 3)0.2V
Driver Common-Mode Output
VoltageVOCFigure 1, R = 50Ω or R = 27Ω3V
Change in Magnitude of
Common-Mode VoltageΔVOCFigure 1, R = 50Ω or R = 27Ω (Note 3)0.2V
Input High VoltageVIHDE, DI, RE2.0V
Input Low VoltageVILDE, DI, RE0.8V
DI Input HysteresisVHYS100mV
Input CurrentIIN1DE, DI, RE±1µA
Hot-Swap Driver Input CurrentIHOTSWAPDE, RE (Note 4)±200µA
VIN = +12V125Input Current (A and B)IIN2DE = GND,
VCC = GND or 5.25VVIN = -7V-100µA
Driver Short-Circuit Output
CurrentVOD1-7V ≤ VOUT ≤ +12V, TA = +25°C (Note 5)±15±250mA
IEC 1000-4-2 Air-Gap Discharge±7
IEC 1000-4-2 Contact Discharge±7ESD Protection for A, B
Human Body Model±15
MAX3060E/MAX3061E/MAX3062E
±15kV ESD-Protected, Fail-Safe, 20Mbps, Slew-Rate-
Limited RS-485/RS-422 Transceivers in a SOT
DC ELECTRICAL CHARACTERISTICS (continued)
(VCC= +5V ±5%, TA= TMINto TMAX, unless otherwise noted. Typical values are at VCC= +5V and TA= +25°C.) (Notes 1, 2)
PARAMETERSYMBOLCONDITIONSMINTYPMAXUNITS
RECEIVER
Receiver Differential Threshold
VoltageVTH-7V ≤ VCM ≤ +12V-200-125-50mV
Receiver Input HysteresisΔVTH25mV
Receiver Output High VoltageVOHIO = -4mA, VID = -50mVVCC - 1.5V
Receiver Output Low VoltageVOLIO = 4mA, VID = -200mV0.4V
Three-State Output Current at
ReceiverIOZR0V ≤ VO ≤ VCC0.01±1µA
Receiver Input ResistanceRIN-7V ≤ VCM ≤ +12V96kΩ
Receiver Output Short-Circuit
CurrentIOSR0V ≤ VRO ≤ VCC±8±80mA
SUPPLY CURRENT
DE = RE = GND7901400Supply CurrentICCNo load,
DI = GND or VCCDE = RE = VCC9101500µA
Supply Current in Shutdown
ModeISHDNDE = GND, RE = VCC0.0011µA
MAX3060E/MAX3061E/MAX3062E
±15kV ESD-Protected, Fail-Safe, 20Mbps, Slew-Rate-
Limited RS-485/RS-422 Transceivers in a SOT
SWITCHING CHARACTERISTICS—MAX3060E
(VCC= +5V ±5%, TA= TMINto TMAX, unless otherwise noted. Typical values are at VCC= +5V and TA= +25°C.) (Notes 1, 2)
PARAMETERSYMBOLCONDITIONSMINTYPMAXUNITS
Driver Input to OutputtDPLH, tDPHLFigures 3 and 5, RDIFF = 54Ω,
CDIFF = 50pF1.01.72.4µs
Driver Output Skew
(tDPLH - tDPHL)tDSKEWFigures 3 and 5, RDIFF = 54Ω,
CDIFF = 50pF-200-7+200ns
Driver Rise or Fall TimetDR, tDFFigures 3 and 5, RDIFF = 54Ω,
CDIFF = 50pF1.31.852.5µs
Maximum Data RatefMAX115kbps
Driver Enable to Output HightDZHFigures 4 and 6, CL = 100pF, S2 closed0.61.5µs
Driver Enable to Output LowtDZLFigures 4 and 6, CL = 100pF, S1 closed0.51.5µs
Driver Disable Time from LowtDLZFigures 4 and 6, CL = 15pF, S1 closed60200ns
Driver Disable Time from HightDHZFigures 4 and 6, CL = 15pF, S2 closed85200ns
Receiver Input to OutputtRPLH,
tRPHL
Figures 7 and 9; | VID | ≥ 2.0V;
rise and fall time of VID ≤ 4ns, CL = 15pF4780ns
Differential Receiver Skew
(tRPLH - tRPHL)tRSKDFigures 7 and 9; | VID | ≥ 2.0V;
rise and fall time of VID ≤ 4ns, CL = 15pF-10-3+10ns
Receiver Enable to Output LowtRZLFigures 2 and 8, CL = 15pF, S1 closed50ns
Receiver Enable to Output HightRZHFigures 2 and 8, CL = 15pF, S2 closed50ns
Receiver Disable Time from LowtRLZFigures 2 and 8, CL = 15pF, S1 closed50ns
Receiver Disable Time from HightRHZFigures 2 and 8, CL = 15pF, S2 closed50ns
Time to ShutdowntSHDN(Note 6)50180600ns
Driver Enable from Shutdown to
Output HightDZH(SHDN)Figures 4 and 6, CL = 100pF, S2 closed2µs
Driver Enable from Shutdown to
Output LowtDZL(SHDN)Figures 4 and 6, CL = 100pF, S1 closed2µs
Receiver Enable from Shutdown
to Output HightRZH(SHDN)Figures 2 and 8, CL = 15pF, S2 closed1.5µs
Receiver Enable from Shutdown
to Output LowtRZL(SHDN)Figures 2 and 8, CL = 15pF, S1 closed1.5µs
MAX3060E/MAX3061E/MAX3062E
±15kV ESD-Protected, Fail-Safe, 20Mbps, Slew-Rate-
Limited RS-485/RS-422 Transceivers in a SOT
SWITCHING CHARACTERISTICS—MAX3061E
(VCC= +5V ±5%, TA= TMINto TMAX, unless otherwise noted. Typical values are at VCC= +5V and TA= +25°C.) (Notes 1, 2)
PARAMETERSYMBOLCONDITIONSMINTYPMAXUNITS
Driver Input to OutputtDPLH,
tDPHL
Figures 3 and 5, RDIFF = 54Ω,
CDIFF = 50pF250470800ns
Driver Output Skew
(tDPLH - tDPHL)tDSKEWFigures 3 and 5, RDIFF = 54Ω,
CDIFF = 50pF-100-4+100ns
Driver Rise or Fall TimetDR, tDFFigures 3 and 5, RDIFF = 54Ω,
CDIFF = 50pF200530750ns
Maximum Data RatefMAX500kbps
Driver Enable to Output HightDZHFigures 4 and 6, CL = 100pF, S2 closed3301000ns
Driver Enable to Output LowtDZLFigures 4 and 6, CL = 100pF, S1 closed2001000ns
Driver Disable Time from LowtDLZFigures 4 and 6, CL = 15pF, S1 closed60200ns
Driver Disable Time from HightDHZFigures 4 and 6, CL = 15pF, S2 closed80200ns
Receiver Input to OutputtRPLH,
tRPHL
Figures 7 and 9; | VID | ≥ 2.0V;
rise and fall time of VID ≤ 4ns, CL = 15pF4780ns
Differential Receiver Skew
(tRPLH - tRPHL)tRSKDFigures 7 and 9; | VID | ≥ 2.0V;
rise and fall time of VID ≤ 4ns, CL = 15pF-10-3+10ns
Receiver Enable to Output LowtRZLFigures 2 and 8, CL = 15pF, S1 closed50ns
Receiver Enable to Output HightRZHFigures 2 and 8, CL = 15pF, S2 closed50ns
Receiver Disable Time from LowtRLZFigures 2 and 8, CL = 15pF, S1 closed50ns
Receiver Disable Time from HightRHZFigures 2 and 8, CL = 15pF, S2 closed50ns
Time to ShutdowntSHDN(Note 6)50180600ns
Driver Enable from Shutdown to
Output HightDZH(SHDNFigures 4 and 6, CL = 100pF, S2 closed1.5µs
Driver Enable from Shutdown to
Output LowtDZL(SHDN)Figures 4 and 6, CL = 100pF, S1 closed1.5µs
Receiver Enable from Shutdown
to Output HightRZH(SHDN)Figures 2 and 8, CL = 15pF, S2 closed1.5µs
Receiver Enable from Shutdown
to Output LowtRZL(SHDN)Figures 2 and 8, CL = 15pF, S1 closed1.5µs
MAX3060E/MAX3061E/MAX3062E
±15kV ESD-Protected, Fail-Safe, 20Mbps, Slew-Rate-
Limited RS-485/RS-422 Transceivers in a SOT
SWITCHING CHARACTERISTICS—MAX3062E
(VCC= +5V ±5%, TA= TMINto TMAX, unless otherwise noted. Typical values are at VCC= +5V and TA= +25°C.) (Notes 1, 2)
Note 1:Overtemperature limits are guaranteed by design and are not production tested. Devices are tested at TA= +25°C.
Note 2:All currents into the device are positive; all currents out of the device are negative. All voltages are referred to device
ground, unless otherwise noted.
Note 3:ΔVODand ΔVOCare the changes in VODand VOC, respectively, when the DI input changes state.
Note 4:This input current level is for the hot-swap enable (DE, RE) inputs and is present until the first transition only. After the first
transition, the input reverts to a standard high-impedance CMOS input with input current IIN1. For the first 10µs, the input
current can be as high as 1mA. During this period the input is disabled.
Note 5:Maximum current level applies to peak current just prior to foldback-current limiting; minimum current level applies during
current limiting.
Note 6:The device is put into shutdown by bringing REhigh and DE low. If the enable inputs are in this state for less than 50ns, the
device is guaranteed not to enter shutdown. If the enable inputs are in this state for at least 600ns, the device is guaranteed
to have entered shutdown.
PARAMETERSYMBOLCONDITIONSMINTYPMAXUNITS
Driver Input to OutputtDPLH,
tDPHL
Figures 3 and 5, RDIFF = 54Ω,
CDIFF = 50pF2030ns
Driver Output Skew
(tDPLH - tDPHL)tDSKEWFigures 3 and 5, RDIFF = 54Ω,
CDIFF = 50pF-10+1+10ns
Driver Rise or Fall TimetDR, tDFFigures 3 and 5, RDIFF = 54Ω,
CDIFF = 50pF815ns
Maximum Data RatefMAX20Mbps
Driver Enable to Output HightDZHFigures 4 and 6, CL = 100pF, S2 closed250500ns
Driver Enable to Output LowtDZLFigures 4 and 6, CL = 100pF, S1 closed250500ns
Driver Disable Time from LowtDLZFigures 4 and 6, CL = 15pF, S1 closed100200ns
Driver Disable Time from HightDHZFigures 4 and 6, CL = 15pF, S2 closed100200ns
Receiver Input to OutputtRPLH,
tRPHL
Figures 7 and 9; | VID | ≥ 2.0V;
rise and fall time of VID ≤ 4ns, CL = 15pF4580ns
Differential Receiver Skew
(tRPLH - tRPHL)tRSKDFigures 7 and 9; | VID | ≥ 2.0V;
rise and fall time of VID ≤ 4ns, CL = 15pF-10-4+10ns
Receiver Enable to Output LowtRZLFigures 2 and 8, CL = 15pF, S1 closed50ns
Receiver Enable to Output HightRZHFigures 2 and 8, CL = 15pF, S2 closed50ns
Receiver Disable Time from LowtRLZFigures 2 and 8, CL = 15pF, S1 closed50ns
Recei ver D i sab l e Ti m e fr om H i g htRHZFigures 2 and 8, CL = 15pF, S2 closed50ns
Time to ShutdowntSHDN(Note 6)50180600ns
Driver Enable from Shutdown to
Output HightDZH(SHDN)Figures 4 and 6, CL = 100pF, S2 closed100ns
Driver Enable from Shutdown to
Output LowtDZL(SHDN)Figures 4 and 6, CL = 100pF, S1 closed100ns
Receiver Enable from Shutdown
to Output HightRZH(SHDN)Figures 2 and 8, CL = 15pF, S2 closed1.5µs
Receiver Enable from Shutdown
to Output LowtRZL(SHDN)Figures 2 and 8, CL = 15pF, S1 closed1.5µs
MAX3060E/MAX3061E/MAX3062E
±15kV ESD-Protected, Fail-Safe, 20Mbps, Slew-Rate-
Limited RS-485/RS-422 Transceivers in a SOT
VOD2
VOC
Figure 1. Driver DC Test Load
RECEIVER
OUTPUT
TEST POINT
1kΩ
1kΩ
VCC
15pF
Figure 2. Receiver Enable/Disable Timing Test Load
CDIFFRDIFFVOD2OUTPUT
UNDER TEST
500ΩS1
VCC
Figure 3. Driver Timing Test CircuitFigure 4. Driver Enable/Disable Timing Test Load
-VO
1.5V
tDPLH
10%
tDR
90%90%
tDPHL
1.5V
10%
tDF
VDIFF = V (A) - V (B)
VDIFF
tDSKEW = | tDPLH - tDPHL |
OUTPUT NORMALLY LOW
OUTPUT NORMALLY HIGH
A, B
VOL
A, B
1.5V1.5V
VOL + 0.5V
VOH - 0.5V2.3V
2.3V
tDZL(SHDN), tDZLtDLZ
tDZH(SHDN), tDZHtDHZ
Figure 5. Driver Propagation DelaysFigure 6. Driver Enable and Disable Times
MAX3060E/MAX3061E/MAX3062E
±15kV ESD-Protected, Fail-Safe, 20Mbps, Slew-Rate-
Limited RS-485/RS-422 Transceivers in a SOT
NO-LOAD SUPPLY CURRENT
vs. TEMPERATURE
MAX3060E toc01
TEMPERATURE (°C)
NO-LOAD SUPPLY CURRENT (3510-15
DE = RE = VCC
DE = RE = GND
RECEIVER OUTPUT CURRENT
vs. RECEIVER OUTPUT LOW VOLTAGE
MAX3060E toc02
OUTPUT LOW VOLTAGE (V)
OUTPUT CURRENT (mA)321
RECEIVER OUTPUT CURRENT
vs. RECEIVER OUTPUT HIGH VOLTAGE
MAX3060E toc03
OUTPUT HIGH VOLTAGE (V)
OUTPUT CURRENT (mA)321
Typical Operating Characteristics
(VCC= +5V, TA = +25°C, unless otherwise noted.)
VOH
VOL
-1V
1.5V1.5VOUTPUT
INPUT
tRPLHtRPHL
OUTPUT NORMALLY LOW
OUTPUT NORMALLY HIGH
VCC
1.5V1.5V
VOL + 0.5V
VOH - 0.5V1.5V
1.5V
tRZL(SHDN), tRZLtRLZ
tRZH(SHDN), tRZHtRHZ
Figure 7. Receiver Propagation DelaysFigure 8. Receiver Enable and Disable Times
RECEIVER
OUTPUTATE
VIDR
Figure 9. Receiver Propagation Delay Test Circuit
MAX3060E/MAX3061E/MAX3062E
±15kV ESD-Protected, Fail-Safe, 20Mbps, Slew-Rate-
Limited RS-485/RS-422 Transceivers in a SOT
MAX3060E/MAX3061E/MAX3062Eypical Operating Characteristics (continued)
(VCC= +5V, TA = +25°C, unless otherwise noted.)
SHUTDOWN CURRENT
vs. TEMPERATURE
MAX3060E toc04
TEMPERATURE (°C)
SHUTDOWN CURRENT (nA)3510-15
RECEIVER OUTPUT LOW VOLTAGE
vs. TEMPERATURE
MAX3060E toc05
TEMPERATURE (°C)
OUTPUT LOW VOLTAGE (V)35-1510
IRO = 8mA
RECEIVER OUTPUT HIGH VOLTAGE
vs. TEMPERATURE
MAX3060E toc06
TEMPERATURE (°C)
OUTPUT HIGH VOLTAGE (V)3510-15
IRO = -8mA
RECEIVER PROPAGATION DELAY
(MAX3060E/MAX3061E) vs. TEMPERATURE
MAX3060E toc07
TEMPERATURE (°C)
PROPAGATION DEALY (ns)3510-15
CL = 15pF
DRIVER PROPAGATION DELAY
(MAX3060E) vs. TEMPERATURE
MAX3060E toc09
TEMPERATURE (°C)
PROPAGATION DEALY (3510-15
Rt = 54Ω
DRIVER PROPAGATION DELAY
(MAX3061E) vs. TEMPERATURE
MAX3060E toc10
TEMPERATURE (°C)
PROPAGATION DELAY (ns)3510-15
Rt = 54Ω
DRIVER PROPAGATION DELAY
(MAX3062E) vs. TEMPERATURE
MAX3060E toc11
TEMPERATURE (°C)
PROPAGATION DELAY (ns)3510-15
Rt = 54Ω
DRIVER DIFFERENTIAL OUTPUT VOLTAGE
vs. TEMPERATURE
MAX3060E toc12
TEMPERATURE (°C)
OUTPUT VOLTAGE (V)3510-15
Rt = 54Ω
RECEIVER PROPAGATION DELAY
(MAX3062E) vs. TEMPERATURE
MAX3060E toc08
TEMPERATURE (°C)
PROPAGATION DEALY (ns)3510-15
CL = 15pF

Partno	Mfg	Dc	Qty	Available	Descript
MAX3061EEKA#TG16	MAIXM	N/a	2500	avai	±15kV ESD-Protected, Fail-Safe, 20Mbps, Slew-Rate-Limited RS-485/RS-422 Transceivers in a SOT