IC Phoenix
 
Home ›  LL3 > L6386ED-L6386ED013TR,HV high and low side driver with embedded comparator and bootstrap diode
L6386ED-L6386ED013TR Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
L6386EDSTN/a2500avaiHV high and low side driver with embedded comparator and bootstrap diode
L6386ED013TRSTN/a8287avaiHV high and low side driver with embedded comparator and bootstrap diode


L6386ED013TR ,HV high and low side driver with embedded comparator and bootstrap diodeFeaturesto work with voltage rail up to 600 V. Both device outputs can independently sink and sourc ..
L6387 ,HIGH-VOLTAGE HIGH AND LOW SIDE DRIVERL6387®HIGH-VOLTAGE HIGH AND LOW SIDE DRIVERHIGH VOLTAGE RAIL UP TO 600 VdV/dt IMMUNITY +- 50 V/nsec ..
L6387D ,HIGH-VOLTAGE HIGH AND LOW SIDE DRIVERELECTRICAL CHARACTERISTICSAC Operation (Vcc = 15V; Tj = 25°C)Symbol Pin Parameter Test Condition Mi ..
L6387DTR ,HIGH-VOLTAGE HIGH AND LOW SIDE DRIVERL6387®HIGH-VOLTAGE HIGH AND LOW SIDE DRIVERHIGH VOLTAGE RAIL UP TO 600 VdV/dt IMMUNITY +- 50 V/nsec ..
L6387ED ,HV high and low side driver with embedded bootstrap diodeFeatures400 mA respectively and cannot be  High voltage rail up to 600 V simultaneously driven hig ..
L6387ED013TR ,HV high and low side driver with embedded bootstrap diodefeatures the UVLO protection on the loadV supply voltage and integrates the bootstrap CC CMOS/TTL ..
LC3564BM-10 ,64K (8192-word x8-bit) SRAM with NOT OE, NOT CE1, and CE2 Control PinsOrdering number : EN5804ACMOS ICLC3564B, BS, BM, BT-70/1064K (8192-word · 8-bit) SRAM with OE, CE1, ..
LC3564BM-70 ,64K (8192-word x8-bit) SRAM with NOT OE, NOT CE1, and CE2 Control PinsOrdering number : EN5804ACMOS ICLC3564B, BS, BM, BT-70/1064K (8192-word · 8-bit) SRAM with OE, CE1, ..
LC3564BS-10 ,64K (8192-word x8-bit) SRAM with NOT OE, NOT CE1, and CE2 Control PinsOrdering number : EN5804ACMOS ICLC3564B, BS, BM, BT-70/1064K (8192-word · 8-bit) SRAM with OE, CE1, ..
LC3564BS-70 ,64K (8192-word x 8-bit) SRAM with NOT OE, NOT CE1, and CE2 Control PinsOrdering number : EN5804ACMOS ICLC3564B, BS, BM, BT-70/1064K (8192-word · 8-bit) SRAM with OE, CE1, ..
LC3564BT-10 ,64K (8192-word x 8-bit) SRAM with NOT OE, NOT CE1, and CE2 Control PinsOrdering number : EN5804ACMOS ICLC3564B, BS, BM, BT-70/1064K (8192-word · 8-bit) SRAM with OE, CE1, ..
LC3564BT-70 ,64K (8192-word x 8-bit) SRAM with NOT OE, NOT CE1, and CE2 Control PinsOrdering number : EN5804ACMOS ICLC3564B, BS, BM, BT-70/1064K (8192-word · 8-bit) SRAM with OE, CE1, ..


L6386ED-L6386ED013TR
HV high and low side driver with embedded comparator and bootstrap diode
June 2014 DocID13989 Rev 3 1/17
L6386E

High voltage high and low-side driver
Datasheet - production data
Features
High voltage rail up to 600 V dV/dt immunity ± 50 V/nsec in full temperature
range Driver current capability: 400 mA source 650 mA sink Switching times 50/30 nsec rise/fall with 1 nF
load CMOS/TTL Schmitt trigger inputs with
hysteresis and pull-down Undervoltage lockout on lower and upper
driving section Integrated bootstrap diode Outputs in phase with inputs
Applications
Home appliances Induction heating Industrial applications and drives Motor drivers SR motors DC, AC, PMDC and PMAC motors Asymmetrical half-bridge topologies HVAC Lighting applications Factory automation Power supply systems
Description

The L6386E is a high voltage gate driver,
manufactured with the BCD™ “offline”
technology, and able to drive simultaneously one
high and one low-side power MOS or IGBT
device. The high-side (floating) section is enabled
to work with voltage rail up to 600 V. Both device
outputs can independently sink and source
650 mA and 400 mA respectively and can be
simultaneously driven high.
The L6386E device provides two input pins, two
output pins and an enable pin (SD), and
guarantees the outputs switch in phase with
inputs. The logic inputs are CMOS/TTL
compatible to ease the interfacing with controlling
devices.
The L6386E integrates a comparator (inverting
input internally referenced to 0.5 V) that can be
used to protect the device against fault events,
like the overcurrent. The DIAG output is
a diagnostic pin, driven by the comparator, and
used to signal a fault event occurrence to the
controlling device.
The bootstrap diode is integrated in the driver
allowing a more compact and reliable solution.
The L6386E device features the UVLO protection
on both supply voltages (VCC and Vboot) ensuring
greater protection against voltage drops on the
supply lines.
The device is available in a DIP-14 tube and
SO-14 tube, and tape and reel packaging options.

Table 1. Device summary
Contents L6386E
2/17 DocID13989 Rev 3
Contents Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.1 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.2 Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.3 Recommended operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Pin connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.1 AC operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.2 DC operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.3 Timing diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Bootstrap driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 BOOT selection and charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Typical characteristic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
DocID13989 Rev 3 3/17
L6386E Block diagram
1 Block diagram
Figure 1. Block diagram
Electrical data L6386E
4/17 DocID13989 Rev 3
2 Electrical data
2.1 Absolute maximum ratings


2.2 Thermal data


2.3 Recommended operating conditions


Table 2. Absolute maximum ratings
Table 3. Thermal data
Table 4. Recommended operating conditions
If the condition Vboot - Vout < 18 V is guaranteed, Vout can range from -3 to 580 V. VBS = Vboot - Vout.
DocID13989 Rev 3 5/17
L6386E Pin connection
3 Pin connection
Figure 2.Pin connection (top view)

Table 5. Pin description The circuit guarantees 0.3 V maximum on the pin (at Isink = 10 mA), with VCC > 3 V. This allows to omit the “bleeder” resistor connected between the gate and the source of the external MOSFET normally used to hold the pin low; the gate driver assures low impedance also in SD condition.
Electrical characteristics L6386E
6/17 DocID13989 Rev 3
4 Electrical characteristics
4.1 AC operation

VCC = 15 V; TJ = 25 °C
‘s
4.2 DC operation

VCC = 15 V; TJ = 25 °C

Table 6. AC operation electrical characteristics
Table 7. DC operation electrical characteristics
DocID13989 Rev 3 7/17
L6386E Electrical characteristics
Electrical characteristics L6386E
8/17 DocID13989 Rev 3
4.3 Timing diagram
Figure 3. Input/output timing diagram
DocID13989 Rev 3 9/17
L6386E Bootstrap driver
5 Bootstrap driver

A bootstrap circuitry is needed to supply the high voltage section. This function is normally
accomplished by a high voltage fast recovery diode (Figure 4 a). In the L6386E device
a patented integrated structure replaces the external diode. It is realized by a high voltage
DMOS, driven synchronously with the low-side driver (LVG), with a diode in series, as
shown in Figure 4 b. An internal charge pump (Figure 4 b) provides the DMOS driving
voltage. The diode connected in series to the DMOS has been added to avoid undesirable
turn-on. BOOT selection and charging
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED